REPAIRS AND POLISHING OF WOODEN FURNITURE AT MD ACCN AND OTHER OTM ACCNS AT INS HAMLA UNDER GE (NW) BHANDUP

Amount

Removing of old unserviceable cane from wooden furniture (other than chair Varandah) and material and labour for recanning with new plastic cane 2 mm wide half round for weaving, 3-4 mm wide, 1/2 round for border complete all as specified and shown in drg FD-3.For Bin soiled linen small /Large /Multipurpose as shown in drg FD-244.

All as per Item No 1 here-in-before but for Chair dining as shown in drg FD-228/279.

All as per Item No 1 here-in-before but for Chair writing as shown in drg FD-250. all as per above

All as per Item No 1 here-in-before but for Chair Easy as shown in drg FD-229. all as per above

All as per Item No 1 here-in-before but for Stool dressing as shown in drg FD-252/27 all as per above

All as per Item No 1 here-in-before but for Chair WBB as shown in drg FD-280. all as per above

Removing of old unserviceable cane of chair varandha preparation of steel surfaces (de-rusting & cleaning ) and apply one coat of synthetic enamel white paint to steel surfaces and recanning with new white plastic cane 4 mm wide all as specified and shown in drg FD-19.

Removing of unserviceable/ chipped plastic laminated sheet from top of table bed side and providing new plastic laminated sheet natural teak face 1.5 mm thick on top of table bed side all as shown on drg, as specified and directed and shown in drg FD-248.

Removing of unserviceable/ broken plywood from back of table bed side and providing new plywood 4mm thick commercial BWR Gde all as shown on drg, as specified and directed and shown in drg FD-248.

Removing of unserviceable deface mirror from table dressing gents of 5.5mm thick and replacing with new mirror of same size & including fixing all as shown on drg as specified and shown in drg FD-231.

Removing of unserviceable/chipped plastic laminated sheet 1.5 mm thick from table dressing gents and provding new plastic laminated sheet natural teak face finish 1.5 mm thick on top, both side and drawers facing and all as shown on drawing as specified and directed and shown in drg FD-31/230.

Removing of unsv plywood from back side of frame table dressing gents & providing new plywood 6mm thick commercial BWR grade all as per drg as specified and directed and shown in drg FD-31/230.

Removing of unserviceable/broken plywood from drawers bottom & providing new plywood commercial BWR grade 6mm thick to the drawer of table dressing gents all as shown on drg & as specified and directed and shown in drg FD-31/230.

Removing of unserviceable deface mirror from table dressing ladies of 5.5 mm thick and replacing with new mirror of same size & including fixing all as shown on drg as specified.( Drg : As per Trade pattern).

Removing of unserviceable/chipped plastic laminated sheet 1.5 mm thick from table dressing ladies and provding new plastic laminated sheet natural teak face finish 1.5 mm thick on top, both sides and drawers facing and all as shown on drawing as specified and directed and shown in drg FD-32/251.

Removing of unsv plywood from back side of frame of table dressing ladies & providing new plywood 6mm thick commercial BWR grade all as per drg as specified and directed and shown in drg FD-32/251.

Removing of unserviceable/broken plywood from drawers bottom & providing new plywood commercial BWR grade 6mm thick to the drawer of table dressing ladies all as shown on drg & as specified and directed and shown in drg FD-32/251.

Removing of unserviceable plywood of back side of side board and providing new 6mm thick commercial BWR gde all as per drg, as specified and directed

Removing of unserviceable/broken laminated sheet and providing new teak face laminated sheet 1.5mm thick on top of side board all as shown on drg, as specified and directed

Removing of unserviceable/broken door shutter for side board and providing new 18/19mm particle board one side teak face exterior grade confirming to IS-308 Door shutter shall be fitted with piano type hinges including knobs. All as specified and directed by Engr-in-charge.

Removing of unserviceable/broken bottom plywood of drawers of side board and providing new 6mm plywood commercial BWR grade all as shown on drg as specified and directed

Removing of unserviceable plywood of both sides of side board and providing new 19 mm thick commercial BWR gde all as per drg, as specified and directed

Removing of unserviceable plywood of shelves of side board & supply and fixing new 18mm thick plywood commercial BWR gde. All as specified and directed by Engr-in-charge.

Removing of the following unserviceable/broken wooden members from chair dining and S&F new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with fevicol/glue and bamboo pins and all as per drawing and specified & directed and shown in drg FD-228 & FD-279.for Front legs of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Rear legs of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Front Rail of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Rear Rail of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Side Rail of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Back Patti of chair dining showing in drg FD-228 & FD-279.

All as per Item No 7.00 here-in-before but for Wooden Stiffner of chair dining showing in drg FD-228 & FD-279.

Removing of the folowing unserviceable/broken wooden members from chair writing and supply and fixing new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with fevicol/glue and bamboo pins and all as per drawing and specified & directed and shown in drg FD-280. For Front legs of Chair writing shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Rear legs of chair wiriting shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Front rail of chair writing shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Rear rail of chair writing shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Side rail of chair writing shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Wooden stiffner of chair writing shown in drg FD-280.

All as per Item No 8.00 here-in-before but for Back patti of chair writing shown in drg FD-280..

All as per Item No 8.00 here-in-before but for Arm rest of chair writing shown in drg FD-280.

Removing of the folowing unserviceable/broken wooden members from chair WBB and supply and fixing new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with fevicol/glue and bamboo pins and all as per drawing and specified & directed and shown in drg FD-280. For Front legs of Chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Rear legs of chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Front rail of chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Rear rail of chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Side rail of chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Wooden stiffner of chair WBB shown in drg FD-280.

All as per Item No 9.00 here-in-before but for Back patti of chair WBB shown in drg FD-280..

All as per Item No 9.00 here-in-before but for Arm rest of chair WBB shown in drg FD-280.

Removing of the following unserviceable/broken wooden members from chair easy and providing and fixing new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with glue and bamboo pins and all as per drawing and specified & directed and shown in drg FD-229.for Front legs of chair easy shown in drg FD-229.

All as per Item No 10.00 here-in-before but for Rear legs of chair easy shown in drg FD-229.

All as per Item No 10.00 here-in-before but for Arm rest of chair easy shown in drg FD-229.

Removing of the unserviceable/broken front/rear frame of seat/ back of chair easy and supply and fixing new one made out of first class hard wood (Indian Teak Wood) Make to shape including drilling of cane holes @ 12.5 C/C and all as per drawing and as specified and directed and shown in drg FD-229.

Removing of the unserviceable/broken side frame of seat/back of chair easy and supply and fixing new one made out of first class hard wood (Indian Teak Wood) make to shape including drilling of cane holes @ 12.5 C/C and all as per drawing and as specified and directed and shown in drg FD-229.

Removing of the unserviceable/broken front/rear rails under neath the seat frame and supply and fixing new one made out of first class hard wood (Indian Teak Wood) make to shape for chair easy and all as per drawing as specified and directed and shown in drg FD-229.

Removing of unserviceable plywood and supply and fixing new plywood 3 mm thick one side teak veneer and teak wood beading all around for head rest (in and out side) of bed plywood top all as shown on drawing and specified and directed Drg No FD-246

Removing of unserviceable plywood and supply and fixing new plywood 3 mm thick one side teak veneer and teak wood beading all around for foot rest (in and out side) of bed plywood top all as shown on drawing and specified and directed Drg No FD-246

Removing the unserviceable plywood top of bed hard and supply and fix new 12 mm thick plywood top BWR grade including tightening the beds with proving 04 Nos wooden brackets to each bed complete all as specified and shown on drawing & directed Drg No FD-246

Removing of unserviceable/broken long rail and supply and fixing new long rail made out of first clas Hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246

Removing of unserviceable/broken short rail and supply and fixing new short rail made out of first clas hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246

Removing of unserviceable/broken head rest and supply and fixing new head rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246

Removing of unserviceable/broken foot rest and supply and fixing new foot rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246

Removing the unserviceable plywood top of bed hard with MNF set and supply and fix new 12 mm thick plywood top BWR grade including tightening the beds with proving 04 Nos wooden brackets to each bed complete all as specified and shown on drawing & directed Drg No FD-246

Removing the unserviceable plywood top of bed hard (MAP) and supply and fix new 12 mm thick PRELAMINATED plywood top BWR grade including tightening the beds with proving 04 Nos wooden brackets to each bed complete all as specified and shown on drawing & directed Drg No FD/E6/MAP/08

Removing of unserviceable/broken head rest and supply and fixing new head rest complete with 12 MM PRELAMINATED PLYWOOD BWR GRADE as per shown in drg. and specified & directed. Drg No FD/E6/MAP/08

Removing of unserviceable/broken Foot rest and supply and fixing new head rest complete with 12 MM PRELAMINATED PLYWOOD BWR GRADE as per shown in drg. and specified & directed. Drg No FD/E6/MAP/08

Removing of unserviceable plywod from top of bin soiled linen and supply and fixing new plywood one side teak veneered 6 mm thick BWR grade and first class hard wood (Indian teak wood) 3 mm thick beadings to the top of bin soiled linen small all as shown on drawings as specified & directed Drg No FD-15 & FD- 244

Removing of unserviceable plywood from front side of bin soiled linen and supply and fixing new plywood one side teak veneered 6 mm thick BWR grade and first class hard wood (Indian teak wood) 3 mm thick beading to the front side of bin soiled linen small all as shown on drawings as specified & directed Drg No FD-15 & FD- 244

Removing of unserviceable plywood from back side of bin soiled linen and supply and fixing new plywood one side teak veneered 6 mm thick BWR grade and first class hard wood (Indian teak wood) 3 mm thick beading to the back of bin soiled linen small all as shown on drawings as specified & directed Drg No FD-15 & FD- 244

Removing unserviceable/broken legs and supply and fixing new leg made out of first class hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed Drg No FD-239

Removing unserviceable/broken top long rail for table dining and supply and fixing first class hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified & directed Drg No FD-239

Removing of unserviceable/broken top short rail to table diing 6/8 persons and supply and fixing first class Hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified and directed Drg No FD-239

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1500 X 900 mm of Table dining 6/8 persons and shown in drg FD-239.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for table 900 X 600 mm without drawer all as shown on drawings, as specified & directed Drg No FD-231

Removing of unserviceable/broken top long rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to table of size 900 mm x 600 mm without drawers all as shown on drawings as specified and directed Drg No FD-231

Remnoving of unserviceable/broken side short rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to table of size 900 mm X 600 mm without drawers all as shown on drawings as specified & directed Drg No FD-231

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beadingduly polished size 900 X 600 mm Table without drawer and shown in drg FD-231.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for Table 900 X 600 mm with drawer all as shown on drawings, as specified & directed Drg No FD-224

Removing of unserviceable/broken long rail and supply and fixing new long rail made out of first class Hard wood (Indian Teak wood) of size 110 X 25 mm thick to table 900 mm X 600 mm with drawers all as shown on drawings as specified & directed Drg No FD-224

Removing of unsv plywood of drawers of table 3'x2' with drawers and supply and fixing new ply 6 mm commerical BWR grade to the table 3'x2' with drawers. All as specified and directed by the engineer in Charge Drg No FD-224

Removing of unserviceable/broken side short rail and supply and fixing first class hard wood (Indian teak wood) of size of table 900 mm X 600 mm with drawers all as shown on drawings as specified & directed Drg No FD-224

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 600 mm Table with drawer and shown in drg FD-224.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for teapoy all as shown on drawings, as specified & directed Drg No-FD-232

Removing of unserviceable/broken long top rail and supply and fixing first class hard wood (Indian teak wood) of size 40 mm X 19 mm thick to teapoy all as shown on drawings as specified & directed Drg No-FD-232

Removing of unserviceable/broken short top rail and supply and fixing new short rail made out of first class hard wood (Indian Teak wood) of size 40 mm X 19 mm thick to teapoy all as shwon on drawings as specified and directed Drg No-FD-232

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished for teapoy and shown in drg FD-232.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for table peg all as shown on drawings, as specified & directed Drg No-FD-236

Removing of unserviceable/broken long top rail and supply and fixing first class Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table peg all as shown on drawings as specified & directed Drg No-FD-236

Removing of unserviceable/broken short top rail and supply and fixing first class Hard wood (Indian teak wood) size 40 mm X 19mm thick to table peg all as shwon on drawings as specified & directed Drg No-FD-236

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 300 X 450 mm Table Peg and shown in drg FD-236.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for table centre all as shown on drawings, as specified & directed Drg No-FD-235

Removing of unserviceable/broken long top rail and supply and fixing first class hard wood (Indian teak wood) of size 50 mm X 25 mm thick to table centre all as shown on drawings as specified & directed Drg No-FD-235

Removing of unserviceable/broken short top rail and supplying and fixing of first clas hard wood (Indian Teak wood) of size 50 mm X 25 mm thick to table centre all as shwon on drawings as specified and directed Drg No-FD-235

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 450 mm Table Centre and shown in drg FD-235.

Removing unserviceable shutter of Table writing and supply and fixing new shutter made out of 18/19 mm thick particle board one side teak veneered with piano type hings with 4 mm thick teakwood beading all around, shaped and size as specified and shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken plywood from back side of Table writing & supply and fix new ply 6 mm thick one side teak face. Shape & size all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken drawers of Table writing and supply and fixing new drawers made out of 12 mm thick teak wood planks with 6 mm thick ply at the bottom all as per drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken legs under neath the box Table writing and supply fixing new legs made out of 45 X 45 mm on top and 25 X 25 mm at bottom all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken plywood from both side of Table writing & supply and fix new plywood one side teak veneered 6 mm thick BWR grade Shape & size all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1145 X 600 mm for table writing.

Removing unserviceable shutter of Table writing OR'S and supply and fixing new shutter made out of 18/19 mm thick particle board one side teak veneered with piano type hings with 4 mm thick teakwood beading all around, shaped and size as specified and shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken plywood from back side of Table writing OR'S & supply and fix new ply 6 mm thick one side teak face. Shape & size all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken drawers of Table writing OR'S and supply and fixing new drawers made out of 12 mm thick teak wood planks with 6 mm thick ply at the bottom all as per drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken legs under neath the box Table writing OR'S and supply fixing new legs made out of 45 X 45 mm on top and 25 X 25 mm at bottom all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken plywood from both side of Table writing OR'S & supply and fix new plywood one side teak veneered 6 mm thick BWR grade Shape & size all as shown on drg as specified and directed Drg No-FD-33 & FD-249

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1145 X 600 mm for table writing OR'S.

Hat Stand with Mirror Removing of unsv/old defected mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing complete all as shown on drg No FD 23/FD 233 as specified by Engr-in-charge.

Removing of unsv/broken Plywood and providing New plywood commercial BWR Grade 4 mm thick 3 ply to back of Hat stand complete all as shown on drg No FD 23/FD 233 as specified by Engr-in-charge.

Table Computer Replacement of unsv top of Table computer providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame complete all as shown on drg No FD E6/MAP/03 as specified by Engr-in-charge.

School chair with desk, S&F top prelaminated particle board of size 585mm x 305mm x 18 mm duly fitted with 4 mm thick teak wood beading alround and polishing of beading (as per sample)

All as per item no. 24 her-in-before but all surface paint over one coat of black synthetic enamel paint.

CHAIR WRITING(MAP), (DRG No. FD/E6/MAP/12, SHEET 1/1) Frame: Frame shall be made out of 25mm x 10mm section MS tubular frame cantilever type powder coated.

CHAIR WRITING(MAP), (DRG No. FD/E6/MAP/12, SHEET 1/1) Hand Rests: One piece arm rest made of black integral skin polyurethane with 75-85 shore ‘A’ hardness and reinforced with MS insert. It shall be scratch & weather resistant. Both hand-rest sections shall have slope towards front.

CHAIR WRITING(MAP), (DRG No. FD/E6/MAP/12, SHEET 1/1) Foam: Polyurethane foam shall be 50mm thick and shall be moulded with density 50-55 Kg per cubic metre and hardness 20 ± 2 Kg on hampden machine. Back foam shall be designed with contoured lumber support for extra comfort and 12mm hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

CHAIR WRITING(MAP), (DRG No. FD/E6/MAP/12, SHEET 1/1) Fabric: Fabric shall be contained the following material in various colours – Arcylic, Polyester, Poly Propylene.

Removing unserviceable/broken legs and providing new leg made out of first class hard wood (Indian teak wood) for Table 900 X 900 mm (3'X3') all as shown on drawings, as specified & directed Drg No FD-88.

Removing of unserviceable/broken top long rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to Table 900 X 900 mm (3'X3') all as shown on drawings as specified and directed Drg No FD--88.

Remnoving of unserviceable/broken side short rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to Table 900 X 900 mm (3'X3') all as shown on drawings as specified & directed Drg No FD-88.

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size Table 900 X 900 mm (3'X3') and shown in drg FD-88.

M&L for preparation of old treated wooden surfaces of various wooden furniture by cleaning,removing old paint marks etc, rubbing with sand paper no 2, filling gapes/holes/bore holes etc with paste filler prepared by mixing wood powder and glue to a creamy consistency adding with raw sienna of quantity required to obtain the desired colour of the base, on drying wiping to hardened rubber surface with sand paper No 2 until thoroughly smooth surface achived & aoolying 02 coats of French polish on entire surfaces compete all as directed by Engineer-in-charge. for Bin soiled linen small as shown in drg FD-244.

All as per Item No 27.00 here-in-before but for Chair dining as shown in drg FD-228/279.

All as per Item No 27.00 here-in-before but for Chair writing as shown in drg FD-250.

All as per Item No 27.00 here-in-before but for Chair WBB

All as per Item No 27.00 here-in-before but for Chair Easy as shown in drg FD-229.

All as per Item No 27.00 here-in-before but for Chair dining with long back (Drg as per Trade pattern)

All as per Item No 27.00 here-in-before but for Hat stand with mirror as shown in drg FD-233.

All as per Item No 27.00 here-in-before but for Peg table as shown in drg FD-236.

All as per Item No 27.00 here-in-before but for Sofa set 5 seater as shown in drg FD-258/281.

All as per Item No 27.00 here-in-before but for Side Board as shown in drg FD-26/241

All as per Item No 27.00 here-in-before but for Stool dressing as shown in drg FD-252/27

All as per Item No 27.00 here-in-before but for Table bed side as shown in drg FD-248/28

All as per Item No 27.00 here-in-before but for Table centre as shown in drg FD-235/29

All as per Item No 27.00 here-in-before but for Table dressing Gents with mirror as shown in drg FD-230/31

All as per Item No 27.00 here-in-before but for Table dressing Ladies with mirror as shown in drg FD-251/32.

All as per Item No 27.00 here-in-before but for Table writing as shown in drg FD-33/249.

All as per Item No 27.00 here-in-before but for Teapoy as shown in drg FD-232/34.

All as per Item No 27.00 here-in-before but for Table dining 6 persons as shown in drg FD-239/30.

All as per Item No 27.00 here-in-before but for Table dining 8 persons as shown in drg FD-239/30

All as per Item No 27.00 here-in-before but for Table 3' x 3' as shown in drg FD-88

All as per Item No 27.00 here-in-before but for Table 3' x2' with drawer as shown in drg FD-41/224

All as per Item No 27.00 here-in-before but for Table 3' x2' without drawer as shown in drg FD-231

All as per Item No 27.00 here-in-before but for Bed hard plywood top as shown in drg FD-246

All as per Item No 27.00 here-in-before but for Sofa chair as shown in drg FD-258/281

Deduct Credit for Demolished/ Dismantled material Rs. (-) 13314.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

M/s SK Construction

GAJANAN SALES CORPORATION