REPAIRS TO PATH, RCC JALLI AND BOUNDARY WALL AT VARIOUS LOCATIONS AT KALIMPONG UNDER GE 867 EWS

Amount

Demolition of concrete block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make: Shankar Saw Mills/Sangam Prefeb Products or equivalent as approved by GE.

M&L for factory made precast cement block masonry with solid blocks obtained from demolition under Item No. 1 above, exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

Demolition of stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 including necessary hammer dressing to face stones and dressing of face beds and joints complete all as specified and directed by Engineer-in-charge.

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 using serviceable stones obtained from demolition vide item No. 4 hereinbefore including necessary hammer dressing to face stones and dressing of face beds and joints complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete 1:4:8 mix, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of existing concrete in foundation and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE.

M&L for Hardcore with Broken stone/boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors laid in alternative bays and finished even and smooth using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for 3mm thick 38mm wide glass deviding strips inserted in position in flooring to confirm to design complete all as specified and directed by Engineer-in-Charge.

M&L for 50 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete polished coloured chequered tiles 300 x300x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premises complete all as specified and directed. Make: NITCO/ULTRA/EUROCON/DECO/BHARAT or equivalent as approved by GE.

M&L for machine pressed precast concrete colour rubber finished interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M35 grade with grey cement and pigment laid on and including 50mm thick sand cushioning including demolition of existing tiles and removing rubbish off the premises complete all as specified and as directed by Engr-in-charge. Make: NITCO/ULTRA/EUROCON/DECO/BHARAT or equivalent as approved by GE.

M&L for 35mm thick precast cement concrete 1:2:4 mix type B0 (using 12.5 mm graded stone aggregate) jallies and loures including all mouldings but excluding frame setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for 25mm thick precast cement concrete 1:2:4 mix type B0 (using 12.5 mm graded stone aggregate) jallies and loures including all mouldings but excluding frame setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels, bands etc., including demolition of existing RCC and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. Note: Reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to sides and soffits of lintels, bands etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

M&L for Mild steel deformed TMT bars 10mm dia and above as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&L for Mild steel deformed TMT bars 8mm dia as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&Lfor Mild steel deformedTMT bars 5mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed by Engineer-in-Charge.

M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement including demolition of existing concrete in coping and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm dia PVC(SWR) pipe(4.50 KGF) for weep holes complete all as specified and directed by Engineer-in-Charge. Make: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK

M&L for raised pointing to random rubble masonry uncoursed in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs.7,400.00 B/F from Ser page No. 24 NOTE: Bidder shall insert credit amount as rate Rs. 7,400.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

GARGO TRADERS

SANJAY SAW MILL

S K ENTERPRISES