REPAIR/ MAINT OF CEILING FANS, EXHAUST FANS, WALL FANS, MAINT OF EARTHING AND REPAIR/ REPLACEMENT OF BUILDING SECURITY LIGHTS OF MD AND OTM ACCN UNDER GE (WEST) JALANDHAR CANTT

Amount

Taking down ceiling fans carefully after removing electrical connection of any make and size, removing to MES workshop, dismantling blades washing of fan body and blades with proper detergent, opening of fan motor and greasing and oiling/ overhauling of ball bearing / bushes respectively complete including replacement of defective unserviceable ball bearing & bushes reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1sqmm copper flexible wire, fan capacitor 2.5/3.15MFD, capacitor holding clamp, PVC connector ,canopies, rubber reel hanging clamp with 12mm dia nut bolt etc of suitable length, split pins heavy duty of sizes locking screws & fan blades fixing screws if found unserviceable /defective including refixing fan at required location all as specified and directed by Engr-in -charge. Note : Spare parts such as copper flexible wire, fan capacitor, capacitor holding clamp, PVC connector, Bolts, Nuts, rubber packing holding clamp, Split pin ,bearings/bushes and screws etc shall measured and paid separately under respective items.

Taking down Exhaust fans/ wall fan/ pedestial fan carefully after removing electrical connection of any make and size,bringing in to MES woprkshop,dismantling blades washing of fan body and blades with proper detergent, opening of fan motor overhauling and oiling and greasing of ball bearing and bushes respectively complete including replacement of defective unserviceable ball bearing & bushes reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1sqmm copper flexible wire, fan capacitor 2.5/3.15/4MFD, capacitor holding clamp, PVC connector, screws & fan blades fixing screws if found unserviceable /defective including refixing the exhaust fan at required location all as specified and directed by Engr-in-charge. Note : Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts, Nuts, rubber packing holding clamp, Split pin ,bearings/bushes and screws etc shall measured and paid separately under respective items.

Dismantling of ceiling fan of 1200 mm sweep of any make, taking out old burnt copper winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of ceiling fan complete, including insulation with copper enamelled wire size as per existing providing varnish, reassembling the fan after proper greasing of ball bearing oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1sqmm wire, capacitor holding clamp, canopies, locking screws, split pin, rubber reel, holding clamp with 12mm dia nut bolt with washers ,PVC connector 2 way and blade screws etc (if required ) complete all as specified and directed Note :-Fans for repairing, rewinding will be issued from E/M Store yard.

Dismantling of ceiling fan of 1400 mm sweep of any make, taking out old burnt copper winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of ceiling fan complete, including insulation with copper enamelled wire size as per existing providing varnish, reassembling the fan after proper greasing of ball bearing oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1sqmm wire, capacitor holding clamp, canopies, locking screws, split pin, rubber reel, holding clamp with 12mm dia nut bolt with washers ,PVC connector 2 way and blade screws etc (if required ) complete all as specified and directed Note :-Fans for repairing, rewinding will be issued from E/M Store yard.

Dismantling of Exhaust fan of following size of any make ,taking out old burnt copper winding wires cleaning of slots, replacement of unserviceable ball bearing, bushes, Rewinding of ceiling fan complete, including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1sqmm wire, capacitor holding clamp, locking screws, split pin, rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required ) complete all as specified and directed. Note :-Fans for repairing, rewinding will be issued from EM Store yard. (a) 18" sweep (450mm)

(b) 15" sweep (375mm)

(c) 12" sweep (300mm)

Dismantling of cabin fan of any size of any make, taking out old burnt copper winding wires cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of cabin fan complete, including insulation with copper enamelled wire size as per existing providing varnish, reassembling the fan after proper greasing of ball bearing oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1sqmm wire, capacitor holding clamp, locking screws, split pin, rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required) complete all as specified and directed.

Dismantling of Wall mounting fan of any size of any make, taking out old burnt copper winding wires cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of wall mounting fan complete ,including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1sqmm wire, capacitor holding clamp, locking screws, split pin, rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required ) complete all as specified and directed.

Supply & fixing of the following spare parts (a) Ball bearing of adequate size

(b) Gun metal bush of suitable size

(c) Split pin

(d) Capacitor holding clamp

(e) Rubber reel

Painting of ceiling fan off sizes with one coat of milky white enamelled spray paint of approved quality after preparation of surface, filling of cavities with metal putty, rewriting the MES No on the fan body with black paint complete all as specified and directed .

Supply & replacement fan capacitor of following sizes complete all as specified and directed. (a) 2.5 MFD

Supply and replacement of PVC Connector 3 way complete all as specified and directed.

Supply and replacement Plastic canopies complete all as specified and directed.

Supply and replacement Bottom Cover plastic complete all as specified and directed.

Supply and replacment bolt nut with washer off sizes complete all as specified and directed.

Supply and replacement Fan hanging clamp complete rubber reel nut bolt washer complete all as specified and directed.

Supply and replacement locking screw complete all as specified and directed.

Supply and replacement blade screw off sizes complete all as specified and directed.

Supply and fixing Fan down rod made out of MS tubing company made 15 mm dia duly painted of size (a) 60 cm long

(b) 90 cm long

(c) 120 cm long

Material and labour for mild steel fan hooks as in repair made out of MS flat 40x6mm, MS nut bolts 12mm dia suitable for GI pipe wooden truss or MS channel as per requirement complete including installation in any position i.e open or inside the ceiling (cost of removing & refixing ceiling sheet included in the rates quoted against the items complete all as specified and directed .

Supply and fixing in replacement PVC Exhaust fans, AC single phase 230/240 V of size 230mm sweep with louver as required for fixing and electrical connection upto ceiling rose complete all as specified and directed.

Supply and fixing in repair LED flood light 120 watt 230V AC outdoor type with thermal management in multiple optics and equipped with 1P66 protection, with impact and corrosion resistant complete with driver and lamp

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), drawn in and including PVC concealed conduit medium grade (ISI marked) with accessories like bends, tee junction boxes fixed on wall, ceiling etc. with sunk mild steel pressed terminal box 1.6mm thick sheet duly painted with two coats of black bituminous paint over a coat of red oxide primer and providing 3mm thick laminated bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

Supply and fixing in repair switch piano flush type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing in repair ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate and isolated body complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 1X25Watts including lamp made of pressure die cast housed with heat resistance toughened glass and high power LED with secondary optics,aluminium IP66 protection, 6500K impact resistance of IK 07 & 10 KV(SEOUL) external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 1X45Watts including lamp made of pressure die cast housed with heat resistance toughened glass and high power LED with secondary optics,aluminium IP66 protection, 6500K impact resistance of IK 07 & 10 KV(SEOUL) external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

21. M & L for Earthing in repair complete with copper earth plate, electrode 60cm x 60cm x 3.15mm thick, buried directly in ground vertically (earth pit not less than 4.65m deep below normal ground level) with top edge of the plate not less than 3.75m below normal ground level connecetd to earth lead of copper strip 20 x 3mm (from top of earth plate up to 7.5m above ground level) by means of bolts, nuts, check nuts, washers of brass with protection pipe of GI light grade 40mm bore and connected to earth test point, earth plate surrounded by packed homogeneous mix alternate layers of charcoal dust, common salt and magnesium sulphaste 15mm thick all around upto height 120cm on top edge of plate and 30cm layer of magnesium sulphate over above layer and watering pipe 20mm bore GI light grade with funnel and wire mesh grade all as shown in electrical plate No 3 of SSR Part-I, testing on completion including PCC chamber (1:2:4), using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 using 20mm graded stone aggregate and 8mm dia TMT bars @ 100mm C/C and angle iron frame including excavation earthwork and returning filing etc, complete all as specified.

22. Supply & Fixing in repair copper strip 20x3mm including all accessories i.e. Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required and directed by Engineer In charge.

23. M & L for GI wire 4mm With GI protection pipe 15mm all as required and directed by Engineer In charge.

CHOUDHARY AND SONS

M/S ASHWANI SETHI

J.K & Company

ARR CONSTRUCTIONS

P.K.MALL ENTERIPRSES

KULDEEP SINGH

M/s Bansi Lal