Repairs to Compound Wall, Fencing, Drains and Sewage Lines etc at Mil Stn Bhusawal under GE (S) Ahmednagar

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs, interlocking blocks, chequered tiles etc of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire mesh of any tye and size all as spcified and as directed

Dismantling of posts or struts (wood, steel or RCC) of any section embedded in concrete,brick work,masonry etc. including taking out embeded portion and making good disturbed ground complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc,. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 300mm all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil all as specified and as directed.

Excavation in post holes, in any type of soil (Avg of soft/loose and hard/dense soil) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50M and making good surface complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.

Removing excavated soil to a distance exc 250m and not exc 500m and depositing where directed.

M&L for cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in surface channel and drains complete all as spcified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in copings, haunchings and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as spcified and as directed.

M&L for precast cement concrete 1:2:4, type B-0, using 12.50mm graded stone aggregate as in columns, posts, boundary pillars and similar articles with plain fair faces including chamfered angles, weathering, throating etc and set in cement mortar 1:4 complete all as specified and as direced.

M&L for precast reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc) and similar small articles with plain fair faces, set in cement mortar 1:4 including moulds etc complete all as specified and as direced. Note : Reinforcement shall be measured and paid for seperately.

M&L in repairs, for precast cement concrete, 1:2:4, type B-0 (using 12.50mm graded stone aggregate) as in 40mm thick louvers and jallies (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in walls, retaining walls, basement walls, and the like, any thickness complete all as specified and as directed.

M&L for reinforced cement concrete 1:1½:3, type A-1, using 20mm graded stone aggregate as in foundations including rafts, footings, plinth beams and bases for columns complete all as specified and as directed.

M&L for reinforced cement concrete 1:1½:3, type A-1, using 20mm graded stone aggregate as in bands, lintels and similar work complete all as specified and as directed.

M&L for reinforced cement concrete 1:1½:3, type A-1, using 20mm graded stone aggregate as in columns complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat all as specified and as directed.

Use and waste of form work for faces of walls, retaining walls, abutments and similar work for rough finished surfaces of concrete flat all as specified and as directed.

Use and waste of formwork to sides of RCC bands, lintels, cantilevers, shelves including sup- ports, overhangs, etc. for rough finished surfaces of concrete flat all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete flat all as specified and as directed.

S&F TMT or twisted bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F TMT or twisted bars, 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F TMT or twisted bars, 5mm dia and over upto and including 10mm dia, as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for mild steel work as in posts and struts as in fencing including cutting tops to shape as required, drilling holes, notching for wire etc flat iron fillets (for securng wire mesh etc) including necessary drilling, bolting or rivetting etc and similar work conforming to Fe-290 Gde-165 all as specified and as directed.

M&L for mild steel framed work as in door or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings (excludig steel sheeting or other covering, running rails ang guides) and hanging, also fastening and fixing complete conforming to Fe 410W ( Gde-250), quality A complete all as specified and as directed.

S&F 1.25mm thick mild steel plain black sheet as in hearths, covering to door shutters, covering to door chowkats (frames), funnels etc cut to size, edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to steel member etc with plainn 40mm lap joint or welded/rivetted seams includig bending, turning up,mitred angles, stopped ends, outlets etc all as specified and as directed.

S&F mild steel framed work such as grills, grtings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.

S&F mild steel rag or lewis bolts 12mm dia, screwed one end with hexagonal or square nuts and washers, the other end enlarged and jaggered or lewised, n exc 15cm long all as specified ans as directed.

S&F in repairs galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed.

Restraining, resecuring including making good staples etc for repairs of galvanised two strand, steel barbed wire complete all aspecified and as directed.

Supply only chain link fencing net, mild steel galvanised, made out of GI wire, complete all as specified and as directed. Note :- Dia and mesh size shall be as decided by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards,rails, straining bolts etc including provision of bindig wire complete all as specified and as directed.

S&F mild steel round bars as in line bars for fixing chain link fencing including hooking ends of bars complete all as specified and as directed

M&L for 75mm thick cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base all as specified and as directed.

M&L for 75mm thick cement concrete 1:2:4, type B-2 using 40 mm graded stone aggregate as in floor laid in alternate bay complete all as specified and as directed.

M&L for 100mm thick cement concrete 1:2:4, type B-2 using 40 mm graded stone aggregate as in floor laid in alternate bay and finished fair complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for glazed coloured ceramic tiles of size 450mm x 350mm x 7mm thick as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for chequered cement concrete tiles, 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for 80mm thick machine pressed precast cement concrete coloured, rubber moulded mat finish, glossy finish interlocking paver block, M-40 grade, conforming to IS-15658-2006, as in floor laid over and including 25mm thick sand cushioning including filling of interstics with fine sand complete all as specifed and as directed. (Note - Shape, size and pattern of tiles shall be as approved by GE)

M&L for 8 to 10mm thick anti skid outdoor paving tiles ((designer type) set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for preparing new steel surfaces of any description n exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for preparing old steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed

M&L for 150 mm internal dia reinforced concrete pipes with collars, class NP3, laid and jointed complete all as specified and as directed.

M&L for 300 mm internal dia reinforced concrete pipes with collars, class NP3, laid and jointed complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore pipes all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet ( pedestal pattern/anglo Indian) white including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set with and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), PVC connection, 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.

S & F in repairs, PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

Removing existing man hole cover and cleaning of blocked sewage line of 250 mm dia including man hole by roding or any other means and making sewage line functional and fixing man hole cover in position complete all as specified and as directed.

M&L for cutting into existing manhole for connecting new replaced drains, making good to pipes & rendering, cutting out existing benching & forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B1, using 20mm graded stone aggregate, smooth finished for 150mm bore pipe including closing of existing drain pipe hole with PCC 1:2:4 type B1 complete all as specified and as directed.

Removing existing man hole cover and cleaning of blocked sewage line of 150 mm dia including man hole by roding or any other means and making sewage line functional and fixing man hole cover in position complete all as specified and as directed.

Blocking up the entry in man holes or septic tank and pumping out effluent from septic tank, sludge chamber including settling tank and intercepting chamber etc and collecting sludge in closed filth carts/vehicles and depositing where directed including sprinkling of antibiotic powder on affected area all as specified and as directed.

Clearing blockages and removal of sludge/mud and other accumulated materials and cleaning gully traps and chambers of any description and size including disposal of sludge materials in closed filth carts/vehicles and depositing where directed including sprinkling of antibiotic powder on affected area all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 110 dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) bend any radius, with oval access door all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) bend any radius all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors all as specified and as directed.

S&F in repairs, 75mm bre PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door all as specified and as directed.

S&F in repairs, 75m bore PVC (SWR) bend any radius, with oval access door all as specified and as directed.

S&F in repairs, 75m bore PVC (SWR) bend any radius, all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) vent cowl all as specified and as directed.

M&L in repairs, for PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete type (1:2:4) type B1 all as specified and as directed.

S&F 100mm dia UPVC pipes as in weep holes of brick masonry of boundary wall including cutting into required lenghts all as specified and as directed.

Bhirud Electric Stores

VIJ ASSOCIATES