Janpad Varanasi me Lahartara se BHU Ravindrapuri Colony Hote huye Vijaya Cinema tak 04 Lane Marg Ka Widening and Strengthening Ka Kary . Length 9.512 km

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to all lead and lift , stacking serviceable and unserviceable materials separately i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (Stabilization with emulsion3.5% and cement 1% ) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, all as specified in clause 519. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying dense graded bituminous macadam Grading -II with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(second layer) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying bituminous concrete Grading -II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying 40 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade on M-15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing, fixing and molding of stone V grooves shape ralling along footpath side on both side of road as per drawing and technical specification and direction of E/I i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing, fixing and molding of outer side wall of footpath along road side as per drawing and technical specification and direction of E/I i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Plain cement concrete M-15 in culvert complete as per Drawing and Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Furnishing and Placing Reinforced/ Prestressed cement concrete M-20 grade in foundation as per drawing and Technical Specification. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

M-25 Reinforced Cement Concrete in box culvert complete as per Drawing and Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

M-30 Reinforced Cement Concrete in Divider complete as per Drawing and Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

M-35 Reinforced Cement Concrete in foundation complete as per Drawing and Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

M-35 Reinforced Cement Concrete in Super Stracture complete as per Drawing and Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Steel grating @ 4.00 kg per no. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Painting or varnishing new work with one coat (upto one sq. mt.) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950. As per PWDSOR 641+642 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Sand Filling in Foundation Trenches as per Drawing & Technical Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing Dewatering at site, all complate of work as per direction of E/I i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Chequered terrazo tiles 20 mm thick in footpath and courtyard marbal chips of size upto 6mm in floors on 25mm thick bed of mortor 1:1:1 ( 1 lime putty:1 surakhi : 1 course sand ) jointing with neat cement slurry mixed with pigment to match the shape of the tiles including rubbing and polishing complete, as per SI 14.24 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Providing Khajoor plantation on center of median of road i/c all material , labour etc complete as per direction of E/I (Spacing @ 5m c/c) in Ch. 7.212-9.5212 i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply and errection of Victoria electric poles 9m long with all its assisorises in center of median required for proper complation of work as per direction of E/I @ 25M between pole to pole ( Analysis for per pole) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply and errection of Victoria electric poles 7m long with all its assisorises in center of median required for proper complation of work as per direction of E/I ( on both side of footpath ) @ 15m between pole to pole ( Analysis for per pole) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

TRAFFIC SIGNS - GIVE WAY/ coutionary signage (90 cm equilaterial triangle) (as per IRC:67-2012) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 90 cm equilaterial triangle i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

TRAFFIC SIGNS - STOP (as per IRC:67-2012) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Speed Limit Sign at Curve and Other Place Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Hazards Sign in front of Parapet Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Transverse Bar (Repeated Bars) for Speed Calming (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 15 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

TRAFFIC SIGNS - SINGLE CHEVRON (NORMAL) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 50 cm x 60 cm rectangular i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Center Line Edge Line (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Cat Eye (Raised Pavement Marker/Road Stud) Sharp Curve and Abadi Portion. Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

TRAFFIC SIGNS - INFORMATIONARY SIGNS (HOSPITAL, PETROL PUMP, POLICE STATION,) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 80X60 cm rectangle board i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

TRAFFIC SIGNS - STATE HIGHWAY ROUTE SIGN BOARD / ABADI NAME Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 45 cm x 60 cm rectangular i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply & Erection Over Head Cantileaver Sign Board as per Morth Specification i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply & Erection of built up overhead structure 18.00 M to 20.00M span comprising of three vertical post of 6.00 M high made up of 350 mm N.B. havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizantal frame comprising of 65 mm . N.B. made havey class main pipe as of 42 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamle paint complate the work includes construction of RCC fundation of size 0.90x0.90M & 1.5 M deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone balllast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply & Fixing 5th kilometre stone (precast) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply & Fixing Ordinary kilometer stone (precast) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

Supply & Fixing Hectometer stone (precast) i/c all material , labour, T&P, labour cess, all taxes etc. but excluding GST.

ganga sagar singh