REPAIR REPLACEMENT OF MISCELLANEOUS BR WORKS SUCH AS DRAIN SEWAGE LINE FENCING BOUNDARY WALL FOOTPATH AND OTHER BR NATURE OF WORKS IN THE AOR OF AGE BR BHUBANESHWAR

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation etc or for shafts, wells, cesspits, manhole,pier holes etc.,n. exe 10sqm on plan and n.exe 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specfied and directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specfied and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of internal dia 200 mm set in cement mortar complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded aggregate)as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200mm dia bore SWG pipes complete all as specfied and directed.

M & L Reinforced concrete pipes, class NP2, laid and jointed bore of pipe 200mm complete with collars complete all as specfied and directed.

Per Leaf

M&L for mild steel 10mm dia and above High strength TMT bar cut to length , bent to shape required including cranking, binding spirally, for hooping for columns, hooking end sand binding with and including mild steel wire n exc 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for cement concrete ( unreinforced) complete all as specified and directed.

M&L for PCC 1:4:8 type D2 type (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for PCC(1:2:4) Type -B0 using 20 mm graded stone aggregate in roof kerbs or mud stops, as in copings, water throughs and the like including weathering, slightly rounded or chamfered angles and throating for benching of manholes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregates as sub base complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L for Rendering 10 mm thick on fair faces of brick work surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Providing precast cover slabs as in cover slabs over Drains/Manholes of Type B1 1:2:4 (20mm graded aggregate) with joints to set in cement mortar 1:6 including demolition of old RCC cover complete all as specified and directed.

M&L for preapartion of new painted surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and directed

M&L for preapartion of old painted surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and directed

M&L for preparation of old painted surfaces of wall and applying one coat of Oil bound distemper on walls complete all as specified and directed

M&L for old sized Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 including demotion of old brick work built in CM complete all as specified and directed.

Clearing away all grass, vegetation, saplings, shrubs, brushwood, undergrowth, roots, etc., as site clearance for execution of work on soft/loose soil for making approach to septic tanks, around manholes, and between manhole to manhole for sewage lines, including working in foul condition, and removing rubbish/debris to a distance not exceeding 500 metres outside the periphery of work site complete all as specified and directed.

Cleaning and removal of blockage from Nahani trap, floor trap, gully trap, Indian water closet (IWC), European water closet (EWC) including CI / UPVC / SW / RCC pipes or any other type of soil/waste pipe up to the first manhole or up to the outside wall junction, by rodding, flushing, or any suitable mechanical means, in foul condition, including removal of sludge, night soil, and rubbish, and disposing of the same outside MOD land in a hygienic and safe manner, complete all as specified and directed.

Taking out carefully precast RCC cover slabs of septic tanks, excavating and removing sludge including foul water by mechanical means using truck-mounted sewage suction/jetting machine (BMC-type sewage tank cleaner), collecting the same in a closed container, and transporting to a distance exceeding 1.00 km, disposing of the sludge and foul material in an excavated earthen pit of adequate size and depth in any type of soil outside Defence (MOD) land, at locations identified and approved by local municipal authorities (BMC or equivalent). After each disposal operation, the pit shall be refilled with earth and properly compacted. The work shall also include cleaning of inspection chambers, sludge chambers, inlet and outlet pipes, and MS rungs, and flushing the entire septic tank system with clean fresh water to restore it to a sanitary condition. Applicable for septic tank capacities ranging from 25 users to 500 users, complete all as specified and directed.

Taking out carefully the cover slab of each manhole of depth from 1.0 metre to 2.00 metre and removing the sludge by mechanical process or manual process transporting to a distance exc 250 m but not exc 500 m and depositing the same in excavated earthen pit of sufficient size and depth of any type of soil within the defence land, where directed including returning, filling of earth in excavated pit after every disposal of sludge etc. and cleaning with fresh water, placing the cover slab in position complete all as specified and directed.

Cleaning of blockage in sewage lines of size 100 mm dia / 150 mm/200mm dia or above, between manholes, by manual means and subsequently flushing with fresh water under pressure to ensure complete clearance. The work shall also include passing of rubber ball of suitable size through the line to confirm full clearance of obstruction and free flow of sewage. All sludge and foul materials to be collected and disposed of outside MOD land in a hygienic manner. The entire operation shall be carried out in foul condition and to the entire satisfaction of the Engineer-in-Charge, complete all as specified and directed.

S&F in repairs Road safety Convex mirror of 800mm dia, Adjustable type and polycarbonate body mounted on 2.5m long SS pole of 50mm nominal bore with adjustable nuts and bolts for installation, embbeded in PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate including excavation complete all as specified and directed. Make: ABS INDUSTRY, 3M or Equivalent etc.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

M&L for Taxi-Track Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with one coat of road marking paint, white/Black/Red/ Golden Yellow ,ANY COLOUR AS APPROVED etc complete all as specified and directed.

M&L for Taxi-Track Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like n exc 10cm wide with one coat of road marking paint, white or golden yellow,ANY COLOUR AS APPROVED etc complete all as specified and directed.

S&F in repairs High Visibility Retro Reflective ISO certified Acrylic Yellow/White/Red vivid colours Tape 50 mm wide with self pressure sensitive adhesive complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings upto 20 mtr height complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour and pattern having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws upto 20 mtr height including necessary scaffolding/ hydra machine as required at site complete all as specified and directed. Note:- All necessary arrangements like scaffolding, ladder, cradles etc will be procured by contractor for smooth execution and protective measures without any extra cost to department.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc upto 20 mtr height including necessary scaffolding/ hydra machine as required at site complete all as specified and directed. Note:- All necessary arrangements like scaffolding, ladder, cradles etc will be procured by contractor for smooth execution and protective measures without any extra cost to department.

S&F in repairs SS 202 turbo ventilator 24 inches throat diameter incluiding polycarbonate ventilator base made with 2mm thick polycarbonate sheet for hanger including taking down of existing turbo ventilator complete all as specified and directed. Note:- All necessary arrangements like scaffolding, ladder, cradles etc will be procured by contractor for smooth execution and protective measures without any extra cost to department.

Taking down carefully existing turbo ventilator of 24 inches throat diameter from roof sheeting or structure, cleaning, oiling, greasing, tightening of screws, bolts, nuts, bearings, and carrying out all necessary minor repairs to make it noise-free and smooth in operation, and refixing in same position after necessary adjustments and alignment, including replacement of unserviceable fasteners or washers as required at site, complete all as specified and directed. Note: All necessary arrangements such as scaffolding, ladders, cradles, safety harness, and protective measures shall be provided by the contractor for safe and smooth execution of work without any extra cost to the Department.

S&F in repairs UV-resistant self-adhesive bituminous tape of size 100mm wide and 1.5mm thick, applied over leaks and cracks on galvanized / asbestos sheet, concrete roofs, frames, skylights, parapets, glass and plastic surfaces, etc.; tape shall be pressure-sensitive, UV-resistant, protected by aluminium film and reinforced with polyester film, forming an instant, permanent and water-tight seal; including all necessary surface preparation, scaffolding at any height, and safety precautions during execution, complete all as specified and directed and as per manufacturer’s instructions. Make: STP, Asian Paints, Dr. Fixit, Fosroc, or equivalent

Dismantaling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & GI frames/Channels complete all as specified and directed.

S&F 3mm thick exterior grade Aluminium Composite Panel (ACP) sheet of alloy grade 315 H14, having PVDF (Polyvinylidene Fluoride) coating on both sides — front side with decorative PVDF coating (minimum 25 microns) and reverse side with service coat / polyester-based protective coating, sheet having anti-fungal and anti-bacterial surface protection, fixed on mild steel framework (measured and paid separately) using suitable aluminium cleats, rivets, screws, sealant, and accessories, ensuring neat finish and proper alignment, complete all as specified and directed. Make: Aludecor / Eurobond / Alstrong / Viva / or equivalent

Dismantling wrought iron or mild steel work of any description at any height complete all as specified and directed.

S&F Fe410-W (Gde-E-250) quality-A Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including hollow/solid sections complete all as specified and directed.

S&F in repairs of SS 304 grade bright finished letter, size of each letter 45 cm width, 45 cm height & 05 cm depth in 2 mm thick sheet letter fixed including necessary fixing arrangements at any height complete all as specified and directed.

S&F in repair door seal made of powder-coated aluminium section of suitable size and profile, fitted with nylon brush strip for preventing entry of dust, insects, smoke, and light; fixed with stainless steel screws (of length varying from 0.75 m to 1.00 m) at uniform spacing, complete with necessary fixing arrangements. The seal shall be fixed on the bottom or sides of wooden / aluminium / uPVC doors, ensuring tight contact with floor or frame surface to achieve proper sealing effe

ct complete as specified and directed.

Taking down chowkats or frames with shutters exc 1.5 Sqm and not exc 4.0 Sqm each (w/o taking Each off shutters from the frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters not exc 1.5 Sqm each (w/o taking Each off shutters from the frames) and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 2 Sqm each and removing from store complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block M-35 grade 60mm thick, any shape and size in conforming to IS-15658-2006 Toping with grey cement with pigment and glossy pattern & shape laid over and including 50 mm thick sand cushion shall be decided and complete all as specified and directed.

M&L preparation of new surfaces of wall and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of alkali resisting priming paint and two coat of oil bound distemper on walls etc complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of alkali resisting priming paint and two coat of oil bound distemper on walls etc complete all as specified and directed.

Supply and fixing powder coated of any colour (Thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Taking down and refixing uPVC/aluminium door or window shutters and making the same workable by replacement of necessary fittings such as joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, PVC rollers, rubber beading, screws etc., and making smooth functioning complete all as specified and directed.

Supply only Sheet glass 5 mm thick ordinary quality area in square exc 0.5 sqm in each pane fixed to Aluminum/ UPVC joinery complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 100 mm long SS Butt hinges complete all as specified and directed.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed including necessary screws and fixing arrangements complete all as specified and directed.

S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised including necessary screws complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips

of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Brass 2 Levers Mortice lock vertical type, size 100mm complete all as specified and directed.

S&F in repairs Aluminium (extruded section Body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 150 mm Long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for replacement of internal flushing kit, syphon valve, float valve, push button/lever, inlet/outlet washers, coupling nut, pipe connectors, rubber gasket, overflow pipe and all other unserviceable fittings and parts of wall mounted flushing cistern of any make, type or capacity (PVC, CP or vitreous china etc.), including cleaning of cistern interior and outlet, checking of water flow, refixing of cover and push mechanism to make the cistern fully functional complete all as specified and directed.

S&F in repairs chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15 mm bore iron pipe complete all as specified and directed.(Make- Prayag, Jaquar and equivalent)

S&F in repairs pillar taps, fancy type of size 15mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs Stop Valves (Angular stop cock) 15 mm bore dia pipe, cast copper alloy,Chromium Plated, Fancy Type, screwed down,high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incluiding making connections and fixed in position incl, fixing in pipe etc complete all as specified and directed.

S&F in reapirs Brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in reapirs 10 Ltr Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm dia PVC flushing pipe complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repairs for Ceramic vitreous China Table Top wash hand basin oval type of size 430 x 350mm including all fittings and fixtures complete all as specified and directed. Make- Prayag Lagoon, Cat NO:- 4706, or Equivalent

S&F in repairs vitreous china pedestal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) of standard size complete all as specified and directed.

S&F in repairs Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.(Make- Prayag, Jaquar and equivalent)

S&F in reapairs PVC connections 600mm long and 15mm bore size with PTMT nuts complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Toilet paper holder of brass chromium plated with flat recessed type SS fixed to walls with chromium plated (CP) brass screws Complete all as specified and directed."

S&F wire netting of stainless steel wire 1.4mm dia, mesh size 20mm × 20mm, fixed with tinned tacks or stainless steel wire staples, including taking down existing damaged netting if any, complete all as specified and directed.(Approx height up to 20m). Note:(a) Fixing of wire netting shall be carried out using MS flat, which shall be measured and paid for separately as required at site.(b) All necessary arrangements such as scaffolding, ladders, cradles, hydra machines and other safety/protective measures required for safe and smooth execution shall be provided by the contractor without any extra cost to the department.

S&F movable type anti bird HDPE nylon net 1.50 mm thick x 25mm aperature as required at site condition, HDPE nylon net must be anti shrinking, UV stabilised light weight, weather proof and UV protection. Fixed portion of HDPE nylon net strain with existing bird proof net lower portion of movable HDPE nylon net providing minimum 2.00 Kg MS chain weight at every 2.0 mtr interval of length for no flying the net & this anti bird HDPE nylon net is manually operation (same as vertical blind curtain) for the purpose of opening and closing complete and maximum height upto door open 14.00mtr including all necessary fitting/builder hardware as per manufacturers instruction including taking down any type of old bird proof net from existing site complete all as specified and directed.

M&L for taking down & refixing existing Moveable Portion bird proof net (approx height 15 to 20 mtr), S&F SS 304 tensioner for adjustment of SS wire sagging and all other necessary anchoring bolts, clamps & welding etc including replacement of new parts against unserviceable existing partscomplete all as specified & directed. Note:- (i) New spare parts will be measured and paid separately as supply only under respective item of this Sch 'A'. (ii) Rate for necessary T&P like Telescopic boom lifter (Hydra machine) etc required to complete the work shall be deemed to included in quoted rate.

(a) Supply only Strings 05 mm dia SS 304 wire which holds bird proof net.

(b) Supply only SS 304 heavy duty pulley of M-25 to M-50 size at one metre interval length which helps to move/slide bird proof net as directed.

(c) Supply only SS 304 heavy duty pulley of M-100 to M-150 size at one metre interval length which helps to move/slide bird proof net as directed.

(d) Supply only Rope 10-15mm dia as per existing (First quality) for sliding bird proof net.

Taking down & Refixing & tightening of fixed portion bird proof net ( approx height 15-20 mtr) including tightening, welding & clamping etc complete all as specified & directed. Note:- (i) New spare parts will be measured and paid separately as supply only under respective item of this Sch 'A'. (ii) Rate for necessary T&P like Telescopic boom lifter (Hydra machine) etc required to complete the work shall be deemed to included in quoted rate.

M&L for Taking down & refixing existing Moveable Portion bird proof net (approx height 15 to 20 mtr), Tightening of tensioner for adjustment of SS wire sagging and all other necessary anchoring bolts, clamps & welding etc including replacernent of new parts against unserviceable existing parts complete all as specified & directed. Note:- (i) Rate for necessary T&P like Telescopic boom lifter (Hydra machine) etc required to complete the work shall be deemed to included in quoted rate.

Taking down eaves gutters and rainwater

pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes 110MM Dia single socketed in any length with rubber ring joints fixed to walls at any height incluiding scaffolding as required at site complete all as specified and directed.

S&F PVC (SWR) Bends of any radius for bore dia 110mm at any height incluiding scaffolding as required at site complete all as specified and directed.