GE/863/EWS-T-24 OF 2024-25

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, complete all as specified and directed.

M&l for PCC 1:3:6 type C2 (40mm graded aggregate) for post holes complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting, etc., and similar work confirming to Fe -290 Gde E-165, complete all as specified and directed.

M&L for mild steel screw bolts 12mm dia (Machine made ) with hexagonal or square heads at on end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10cm n. exc. 15 cm long complete all as specified and directed.

Supply & Fixing chain link MS galvanised fencing of mesh size 50mm x 50mm including line wires, to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

S&F for Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild wire, staples or steel pins etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spfd and directed.

Supply only MS round bars of 10mm dia as in line bars Fe 290 Grade E-165, complete all as specified and directed.

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth or not exc 10 Sqm on plan and n. exc. 1.5 metre in depth in any type of soil and getting out complete all as spd and directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as spd and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as spd and directed.

M&L for Cement concrete 1:4:8 type D-2 (Nominal mix) using 40 mm graded crushed stone aggregates in foundations, filling and mass concrete complete all as spd and directed.

M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works; vertical or to batter to flat rough finished surfaces of concrete, complete all as specified and directed.

M&L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions to square, rectangular or polygonal rough finished surfaces of concrete, complete all as specified and directed.

M&L for RCC Nominal mix Type B-1, 1:2:4 (using 20mm graded aggregate) as in fdns, including rafts, footings, fdn beams; plinth beams; bases for columns, etc., and mass concrete complete all as specified and directed.

M&L for RCC Nominal mix Type B-1, 1:2:4 (using 20mm graded aggregate) as in columns, pillars, piers, posts and struts, etc., complete all as specified and directed.

M&L for TMT bars (Fe 500), 10 mm dia and over in reinforcement cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia as in stirrups, spacers and binders, bending spirally for hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed.

M&L for framed work such as in steel doors, gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, Fe-410-W Gde E-250 of quality "A' complete all as specified and directed.

Supply only 25 mm bore GI pipe medium grade, complete all as specified and directed.

All as per item ser no 20 here-in-before but of 20 mm bore, complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on fair face of brick work or concrete surfaces finished even and smooth w/o using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of brickwork or concrete surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M & L for 40 mm thick Cement Concrete 1:2:4 Nominal Mix type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE:- Water proofing compound will be measured and paid separately as supply only.

Supply only Integral water proofing compound (WPC) of approved make complete all as specified and directed.

M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete solid block masonry in PCC 1:3:6 type C-1 in wall with solid block n exc. 10 cm thick and setting in CM 1:4, complete all as specified and directed.

M&L for Hard core of gauge n exc 63mm thick of broken boulder spreading, leveling, watering ramming to true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement, complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic coloured tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and risers to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection laid in alternate bays and finished even and smooth without using extra cement including filling the joints with bitumastic filling, with 85/25 bitumen and coarse sand mixture 1:3 by weight, as in plinth protection complete all as specified & directed.

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in Beams, cantilevers, bressummers, lintels etc., complete all as specified and directed

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in chajjas complete all as specified and directed

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints, including tarring of back of chowkat, complete all as specified and directed by Engr In Charge.

S & F II class hard wood Plain, framed, pannelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc., complete all as specified and directed.

S&F for butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.

S&F MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 250mm length, complete all as specified and directed by Engr In Charge.

S&F 150mm barrel tower bolts, stove enamelled black, with bright bolt, complete all as specified and directed by Engr In Charge.

S&F MS pressed handles, oval type, stove enamelled black size of 125mm, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of a colour approved by Garrison Engineer having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material & labour for two coats of synthetic enamelled paint over a coat of pink primer on new wooden surfaces exc 10cm in width or girth including preparation of surfaces, complete all as specified and directed by Engr In Charge.

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

S & F of rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed by Engr-in-charge.

S & F bands, straps, supports or stays for rain water, ventilating pipes, including bolts if required as in wind tie using MS flat iron (40x6)mm, holdfasts, hooks, plate washers, and other similar work confirming to Fe 290 (Gde-E-165), duly painted with bituminous paint and sanded, complete all as specified and directed by Engr-in-charge.

S & F 500 Ltr capacity Rotational moulded polyethylene water storage tanks having tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engr-in-charge.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed. ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms), complete all as specified and directed.

S&F for 15 mm bore pipe Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F for 20 mm bore pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S & F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including 'P' & 'S' trap and provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

Supply and fixing of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl 32 mm dia waste pipe, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 75 mm bore vent cowl, complete all as specified and directed.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall,complete all as specified and directed.

S & F of 20 mm dia Aluminium anodised tubular towel rail including one pair of fixing brackets complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 100 mm bore, after they are laid and tested complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of salt glazed stone ware pipe 150 mm bore, after they are laid and tested complete all as specified and directed.

Supply, laying, jointing and testing for 100 mm bore class ‘A’ salt glazed stone ware drain pipe (ISI Marked) of approved make laid in trenches jointed in CM 1:1 complete all as specified and directed.

Supply, laying, jointing and testing for 150 mm bore class ‘A’ salt glazed stone ware drain pipe (ISI Marked) of approved make laid in trenches jointed in CM 1:1 complete all as specified and directed.

M&L for pre-cast reinforced cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate ) as in cover slabs for man-holes etc. except set in CM (1:6) complete all as specified and directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats of weight minimum 190gm complete all as specified and as directed.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet for fixing switches, sockets, regulators, etc. for one light/fan/bell point controlled by one switch complete all as specified and directed by Engr-in-charge.

All as per item No 84 here-in-before but for one multipin socket outlet 15 Amp, independent board using 2.5 sqmm copper conductor, complete all as specified and directed by Engr-in-charge.

All as per item No 84 here-in-before but for one multipin socket outlet 5 Amp on the independent board, complete all as specified and directed by Engr-in-charge.

S & F switch piano type 5 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multipin 5 Amp 230 Volt flush type complete all as specified and directed.

S & F switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified and directed.

S & F Ceiling rose, 3 terminal, PVC isolated body with ISI mark complete all as specified and directed

S & F LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x10W/1X12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-charge.

S & F sheet metal enclosure double door distribution board single pole and neutral, 4 way 240 volt, complete all as specified and directed.

S & F MCB 6 to 32 amp rating 240V, 10KA 'C' curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No 95 here-in-before but of SPN and capacity 32 Amps, complete all as specified and directed by Engr-in-charge.

M & L of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40mm dia GI protection pipe medium grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately. 2.On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

Supply and fixing of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified and directed.

S&F for PVC exhaust fan, Single Phase 250mm sweep, with louvre complete all as per specified and directed by Engineer-in-Charge.

Supply, fixing, Testing highly BEE five star rated energy efficient water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls and including all accessories such as safety valve, thermostat, NRV, PVC connections pipe, etc. of capacity 25 Litres, complete all as specified and directed By Engr-in-charge.

S & F sheet metal enclosure with two pin and earth plug and socket complete with single pole and neutral MCB 20 Amp 10kA, complete all as specified and directed.

chankaya solutions (BID ID -3078651)

SANTOSH KUMAR (BID ID -3077553)

M/S PYARE LAL (BID ID -3087600)

PRITPAL SINGH (BID ID -3081926)

Dharm Singh Contractor (BID ID -3084421)

Kusan Enterprises (BID ID -3094014)