Repair and renovation of House No. 35 and 36 Type-II Quarter New Campus at MAMC Agroha

Amount

Civil Work Items Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR:30.21

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : HSR 11.67 11.67.1 Water thinnable cement primer

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. HSR:11.66 11.66.2 Two coats

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : HSR:5.30 5.30.1 Of area 3 sq. metres and below

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) HSR:12.7 12.7.2 Kiln seasoned and chemically treated Hollock wood 12.7.2.1 35 mm thick shutters

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. HSR:30.19

Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): HSR:11.26 11.26.1 Flush/ Ruled/ Struck or weathered pointing

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. HSR:5.13

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR:10.58

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR:10.63 10.63.2 Size of Tile 600x600 mm

Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads HSR:5.50

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: HSR:30.54 30.54.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. HSR:11.77

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR:11.78

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR:11.76

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : HSR:30.28 30.28.1 One or more coats on old work

Providing & fixing PVC board 19mm thick cabinet fixed in kitchen area cutting, wastage nail, screws, favicol, cabinet handle, hydraulic etc. complete in all respect. (N.S.)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : HSR:12.19 12.19.1 35 mm thick shutters 12.19.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size 12.19.1.1.2 Kiln seasoned and chemically treated Hollock wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : HSR:12.19 12.19.2 30 mm thick shutters 12.19.2.1 with ISI marked M.S. pressed butt hinges bright finished of required size 12.19.2.1.2 Kiln seasoned and chemically treated Hollock wood

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: HSR:13.3 13.3.1 Profile B 13.3.1.1 Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: HSR:13.3 13.3.3 Profile E 13.3.3.1 Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR:12.98 12.98.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.99 12.99.3 200x10 mm

150x10 mm HSR:12.99.4

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.102 12.102.1 125mm

100 mm HSR:12.102.2

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. HSR:12.10 12.10.2 Kiln seasoned and chemically treated Hollock wood 12.10.2.2 30 mm thick

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. HSR:12.103 12.103.1 Single rubber stopper

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : HSR 9.17 9.17.1 In 75x75 mm deep chase

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR 10.62

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. HSR 5.42

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. HSR 5.45

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. HSR:5.44

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 10.50 10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

12 mm cement plaster of mix : HSR:11.5 11.5.3 1:4 (1 cement: 4 fine sand)

Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. HSR:30.51

Public Health Work Items Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings.20.50 20.50.1 15 mm internal diametre of the pipeline

20.50.2 20 mm internal diametre of the pipeline

20.50.3 25 mm internal diametre of the pipeline

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : HSR 5.54 5.54.2 100 mm dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. HSR 22.86 Concealed work, including cutting chases and making good the walls etc. 22.86.2 20 mm nominal outer dia Pipes

22.86.3 25 mm nominal outer dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.22.88 22.88.1 15 mm nominal outer dia Pipes

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR 9.57 9.57.2 110 mm diameter

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- HSR:22.2 22.2.1 White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.HSR: 22.5

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : HSR:22.10 22.10.2 Kitchen sink without drain board 22.10.2.2 610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. HSR:22.14 22.14.2 Flexible pipe 22.14.2.1 32mm dia

Providing and fixing 100 mm sand cast Iron grating for gully trap. HSR:22.19

Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : HSR:22.23 22.23.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR:22.38

Providing and fixing toilet paper holder : HSR:22.42 22.42.1 C.P. brass

Cutting holes up to 30x30 cm in walls including making good the same: HSR:22.82 22.82.1 With common burnt clay non-modular bricks

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete HSR:22.92 22.92.1 25 to 40mm niminal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : HSR:22.94 22.94.1 15mm nominal bore

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : HSR:22.100 22.100.2 20mm nominal bore

Providing and fixing Unplasticised PVC connection pipe with brass unions : HSR:22.101 22.101.2 45cm length 22.101.2.1 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter. (HSR- 22.102.2)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : HSR:22.104 22.104.1 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. HSR 22.106 22.106.1 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore . (HSR--22.107.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 HSR:22.108 22.108.1 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR:22.109

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg HSR:22.202

Supplying and fixing C.I. cover without frame for manholes : HSR:22.200 22.200.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. HSR:22.209

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. HSR:22.211

Providing and fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc. HSR:22.213 22.213.2 Toothbrush Holder

Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in-charge. HSR:22.216 22.216.1 25 Litres capacity

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR:22.222 22.222.2 Single Socket Type B 22.222.2.2 110mm o/d SWR UPVC pipe lines laid complete

Providing & fixing 110mm door Tee NS

Providing & fixing 110mm elbow NS

Providing & fixing 110mm Y tee NS

Providing & fixing 110mm coupler/socket NS

Providing & fixing 110mm P trap NS

Providing & fixing CP lock jali complete in all respects (N.S.)

Supply & fixing of Towel Rack 600MM long with lower hangers of stainless steel (N.S.)

Supply & fixing of Towel Ring round with round flange (N.S.)

Electrical Work Items Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required HSR 23.4.5 23.4.5.1 Group A

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. HSR 23.5.6 23.5.6.1 1 run of size 1.50 sqmm (1/1.40mm)

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR 23.7.6 23.7.6.1 PVC pipe of 20 mm dia.

23.7.6.2 PVC pipe of 25 mm dia.

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. HSR 23.8.10 23.8.10.1 1 & 2 Modules including combined plate for Telephone and data

23.8.10.2 3 modules

23.8.10.3 4 modules

23.8.10.4 6 modules

23.8.10.5 8 modules

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR 23.8.11 23.8.11.1 5 amp 1 way switch

23.8.11.2 5 amp 2 way switch

23.8.11.3 15 amp 1 way switch

23.8.11.4 5 amp Socket

23.8.11.5 15 amp 6 pin Socket

23.8.11.6 Bell Push

23.8.11.7 step type Fan Regulator 2 modules 300 watt

23.8.11.8 Telephone Socket outlet modular type

23.8.11.10 Blanking plate

Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required HSR 23.20

Supply and erection of sheet steel enclosures 1pole/2 pole/4 pole on wall/on existing pedestal complete as required. HSR 23.22.3 23.22.3.2 S.P.N. or DP enclosure suitable for DP MCB

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- HSR 23.22.5 23.22.5.1 6 amp. to 32 amp Single Pole

23.22.5.3 6 amp. to 32 amp Double POLE

Supply and erection of U- PVC Trunking/Channel of following size including cost of fixing on wall, floor and ceiling etc. with required material complete the job in all respect up to entire satisfaction of the Engineer-in-charge of work. HSR 23.23.5 23.23.5.1 25X12mm

Dismantling old wiring points ( Recess wiring or partly recess partly surface system , recess Conduit and box not to be dismantled ) including necessary repairs to wall etc. HSR 23.25.2 23.25.2.1 Light, fan or call bell Point including circuit/sub main wiring

23.25.2.2 Wall socket point including circuit/submain wiring

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required (HSR 24.1.1)

Extra for using salt and char coal/coke for pipe earth electrode as required (HSR 24.1.2)

providing and fixing 4mm dia GI wire on surface or in recess for loop earthing as required. HSR 24.1.13

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. HSR 24.5.2 24.5.2.2 DWC/HDPE pipe 50/40 mm outer dia/ inner dia

S/E/I/T/C of following sizes of heavy duty exhaust fan suitable for single phase 230 volts, 50 Hz AC supply complete with motor, capacitor, louvers / shutters , and required size 12mm thick ply sheet with 2 coat paint etc. complete as required. Make- Orient / Crompton/ Bajaj NS (i) 300mm sweep size 1440 RPM

S/E of 1200mm sizes of energgy saving type ceiling fan complete with double ball bearing. motor, blades, downrod, canopy, capacitor, etc. suitable for operation on 230 volts 50 Hz A.C. supply complete as required. Make Bajaj (Excel), Orient (Smart saver 50), Havells with 1.5 to 5 feet fan rod NS

SETC of 25 sqmm 4 core PVC insulated Aluminium conductor armoured cable undergroung or in existing HDPE/ PVC pipe / trenches including the cost of termination Aluminium thimble and petty materials etc. as required to complete the job. NS