ARMO works at FSD Wardha for year 2025-26 Painting of godown and ancillary structures, repairs to rolling shutters, godowns,ancillaries and other miscellaneous repair works.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. : In cement mortar

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineering-in-harge. : In cement mortar

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (Zone III) derived from natural sources): 8 graded stone aggregate 40 mm nominal size derived from natural sources). (Stone aggregate will be supplied by Deptt. free of cost )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(Zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in retaining walls, return walls, walls (any thickness)including attached pilasters, columns, piers, abutments, pillars, posts,struts,buttresses, string or lacing courses, parapets, coping , bed blocks, anchor blocks, plain window sills, fillets,, sunken floors, etc.. upto floor five level, excludingthe cost of centering and shuttering - a)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (Zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. : Cold twisted bars

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in foundation and plinths in all shapes and sizes in: Cement Mortar 1:6 (1Cement : 6 Coarse sand )

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement Mortar 1:6 (1Cement : 6 Coarse sand )

Half brick masonry with common burnt clay F.P.S ( non modular) bricks of class designation 3.5 in foundation and plinth in : Cement Mortar 1:4 (1Cement : 4 Coarse sand )

Random rubble masonry with hardstone in foundation and plinth including levelling up with cement concrete 1:6:12(1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal nominal size )upto plinth level with : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge : :With cement mortar 1:4 (1cement: 4 coarse sand)

6 mm cement plaster of mix : 1:6 (1cement : 3 fine sand)

12 mm cement plaster of mix : 1:6 (1cement : 6 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1cement : 6 fine sand)

20 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)

Neat cement punning

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600. Upto 20 mm depth and 20 mm width

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 20 metres lead. : For thickness of tiles 10mm to 25mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fiottings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in charge . Internal work- exposed on wall : 15 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fiottings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in charge . Internal work- exposed on wall : 20 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work 25 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work 40 mm nominal dia pipes

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete.: 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality( Screwed end) 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality( Screwed end) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality( Screwed end) 50 mm nominal bore

Providing and fixing on wall face unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion , .(i) Single socketed pipes. : 110 mm diameter

Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler : 110 mm

Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree: 110mm bend

Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain): 110 mm Shoe

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing unplasicised P.V.C. connection pipes with brass unions.: 45 cm length, 15 mm nominal bore

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550x400 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever ) conforming to IS: 7231, with all fittings and fixtures complete .: 10 lit capacity - white

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing white vitreous china water closet squatting pan (Indian type): Orissa pattern W.C. pan of size 580x440 mm

Cleaning of terrace /loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brishes, duster etc. , removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.50 gm per litre capacity of tank , including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer -in- charge. ( The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) ( if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account): for first half year

Cleaning of terrace /loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brishes, duster etc. , removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.50 gm per litre capacity of tank , including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer -in- charge. ( The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) ( if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account):for second half tear

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-charge. The cleaning shall consist following operations :- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposists. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of R.C.C. internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultravoilet radiation etc. as per direction of Engineer - in -charge.: for first half year

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-charge. The cleaning shall consist following operations :- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposists. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of R.C.C. internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultravoilet radiation etc. as per direction of Engineer - in -charge.: for second half year

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Supplying and fixing G.I hard drawn steel wire fabric of mesh size 25 mm x 25 mm with wire diameter 3 mm size weighing not less than 4.54 kg/sqm as directed by Engineering In charge.

Cleaning of internal drains, Nallha Storm water drains etc. for smooth flow of water including disposal of rubbish outside the depot premises with all leads and lifts as per directions of Engineer in charge.

Supply of skilled and unskilled labours to carry out the misc. works in depot premises, D.O. premises and staff quarters premises as and when required as per direction of Engineer-in- charge. Skilled labours average (Carpentar, mason, Blacksmith, Fitter, Plumber)

Supply of skilled and unskilled labours to carry out the misc. works in depot premises, D.O. premises and staff quarters premises as and when required as per direction of Engineer-in- charge. Unskilled labours (Beldar, Coolie)

Disposal of moorum/building rubbish/malba/similar unserviceable, dismantled or waste material by mechnanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per direction of Engineer in Charge.

White washing with lime to give an even shade. Old work (two or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coats applied @ 0.9 ltr/10 sqm).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Lettering with black Japan paint of approved brand and manufacture.

Repairing, servicing and over hauling of rolling shutters of all sizes including greasing, oiling, tensioning of springs also replacing the damaged parts of rolling shutters like laths, shafts, pulleys, side guides, bottom plates welding of locking hooks, handles etc. complete as required) so as to make its operation smooth through out the contract period . Necessary required parts for rolling shutters shall be supplied free of cost by department. Grease is to be arranged by the contractor.

Supply of springs of grade No. 2 of 27.5 cm length including loading, unloading and transportation at site and including all taxes etc. complete.

Supply of shafts of approved quality for rolling shutters of all sizes of 40 mm dia. MS pipe including loading, unloading and transportation and including all taxes etc. complete.

Supply of M.S. wheel of required size for rolling shutter of approved quality including loading, unloading and transportation at site and inclusive of all taxes etc. complete.

Repair and maintenance of GI/Profile roof of godown with material such as silicon sealant, self driilling/self tapping screws of size 5.5 x 55 mm with EPDM seal, including greasing of turbo ventilators as and when required during the contract period complete as per the directions of Engineer-in-charge.(Details of cost for 5000 MT capacity godown)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing turbo ventilators of 22" dia as per the manufacturers specification with all accessories and as directed by engineer in charge. :Size - 22" stainless steel grade - 430, No. of outer wings - 24 (22"), No. of iner wings - 6 (22"), Fan Base - Nylon, Top & Bottom - stainless steel grade - 430, inside material - Nylon, Fan Blade OD - 600 mm, Nylon blade ring - 560 mm (for 22"), Total fan height - 360 mm (for 22"), Self lubricating bearing. Base sheet should be made of Ploy carbonite sheet of 2 mm thick.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Credit for taking away dismantlled/ released materials on "AS IS WHERE IS BASIS" as per the direction of Engg. - in -charge.(B) Rolling shutter old dismantled material such as spring, shaft, wheel etc

Please Enable Macros to View BoQ information