Remaining Work of Road under Package No. RJ-02-03/NCRPB/2017-18 in Alwar District

Amount

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots stacking of serviceable material with all lifts and upto all lead and earth filling in the depression/ pit as per MORTH specification clause 201. Girth from 600mm to 900mm

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material upto all lead including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MORTH specification clause m201 By mechanical Means . A. In area of light jungle

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto all lead, stacking serviceable and unserviceable materials separately as per MORTH specification clause 202.

Earth work in excavation, including stacking /disposal of surplus material with all lifts and lead, exclusive of compensation of earth [MoRTH specification : Clause 301 to 305] In Hard Soil When excavation and loading is done mechanically using Bull Dozer, Front end loader and carriage is done up to all lead by tipper/dumper (6T capacity).

Earth work in excavation in foundation trenches etc. .in drains and channels etc. not exceeding 2m.depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m Clear from the edge of excavation including disposal of surplus soil as directed within all lead [MoRTH Specification : Clause 301,304] Ordinary Soil

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305.

Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No.305.

Construction of unlined surface drain of average cross sectional area 0.4 sqm in soil to specified lines, grades, levels and dimensions as per approved design and to the requirement of clause 301 to 309. Excavated material to be used in embankment within all lead Mechanical means

Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401]. including all lead & lift Grading I Material

Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401]. including all lead & lift Grading III Material

Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401]. including all lead & lift Grading III Material

Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer’s specifications @ 7.5 kg /10 sqm with a self propelled of towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI 502,112 (Including cleaning of road surface )

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.5 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 (Including cleaning of Road Surface )

Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 510 and design mix for base/binder course including loading of material with F.E loader heating of binder aggregate and filler in approved hot mix plant as per clause 6.5 of manual transporting the mixed material by tippers and laying with sansor paver finisher as per clause 507.3.5 to the required level and grade rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 507,112] Grading II (19 mm nominal size) - Bitumen @ minimum 4.5 % of mix (VG-30 grade) & thickness 50 - 75 mm with all lead & lift

Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-18 for wearing course including loading of aggregate with F.E loader and hot mixing of binder and 2% cement filler with aggregates in approved hot mix plant as per clause 6.5 of manual Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clouse 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MORTH Specification : Clause -509,112) Grade-II Bitumen @ minimum 6 % of mix with all lead & lift VG-30 grade

Construction of dry lean cement concrete subbase over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm , aggregate cement ratio not to exceed 15:1 , aggregate gradation after blening to be as per Table 600-1, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant as per mix design, transported to site, laid with a hydrostatic paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing complete as per MoRTH specification Clause 601

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement @ 400 Kg per cum , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrance, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as per MoRTH specification clause 602.

Providing and laying of hot applied thermoplastic compound inclusive type-I reflectrosing glass beads as per table 800-3, 800-4 applied in uniform thickness of at least 2.5 mm and spread uniformly with reflectorising glass beads type II in addition @ 250 gms per Sqm with a road marking machine as per IRC: 35 complete with traffic diversion arrangement as per MORTH specification clause 803.4.

Supply & fixing of precast reinforced cement concrete M-15 grade kilometre stone of standard design as per IRC: 8-1980, fixing in position in cement concrete 1:4:8 including painting and printing etc. 5 KM STONE

ORDINARY KM STONE

200m Stone

Supply & fixing of precast reinforced cement concrete M-15 grade boundary pillars 100mm x 100mm x 900mm of size of standard design as per IRC: 25-1967, fixed in position in cement concrete 1:4:8 including finishing and lettering but excluding painting.

Providing and fixing of retro- reflectorised inclusive cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting lettering, border & signs fixed over aluminium sheeting, 1.5 mm thick, fixed on mild steel angle iron frame 50mmx50mmx6mm supported on a mild steel angle iron post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign board is 2.85m. upto foundation level post duly painted in black & white synthetic enamel. fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 Cm x 45 Cm x 60 cm, 60 cm below ground level as per approved drawing & as per MoRTH specification clause 801 60 Cm circular

Providing and erecting direction and place identification retro - reflectorised sign as per IRC:67 made of high intensity grade sheeting exclusive of lettering, border & signs fixed over aluminium sheeting, 2 mm thick fixed on a mild steel angle iron frame m50mmx50mmx6mm supported on mild steel angle iron post 75 x 75 x 6 mm upto the top of sign board, length of post from bottom of sign board is 2.85 m. upto foundation level post duly painted in black and white synthetic enamel alternate ship 30cm. wide fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 Cm , 60 Cm below ground level as per approved drawing & as per MORTH specifications clause 801. Double angle post 180 cm. X 120 cm.

Providing & fixing of retro-reflectorised hazard marker of size 30cm. X 90 cm. As per IRC-79-1981 made of high intensity grade sheeting in the form of alternate black & yellow strip sloping down ward at an angle of 45 degree C vide clause 801.3, fixed over aluminium sheeting, 2mm thick fixed on mild steel angle frame 50mmx50mmx6mm supported on mild steel angle post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign board is 90 cm. upto foundation level fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmX45cmX60cm below ground level as per approved drawing & as per MoRTH specification clause 801

Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (New construction) , extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a miniumum fill of granular material over top and sides of RCC pipe as per IRC:98-1997 , bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe atleast half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98- 1997 and approved drawings. Single row for one utility service

Raised Pavment Marker ( Cats Eyes): Supplying and Fixing of Molded Shank Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. The contractor shall submit 2 years prequalified warranty certificate from the manufacturer for satisfactory field performance during the time of bid submission.

Providing and fixing of reinforced Ferro- Cement drain covers designed for 'A' & 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. For Class - 'AA' loading Span 701 to 1200 mm Standard size 1500x600 mm

Providing and fixing of Precast concrete interlocking blocks of manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks.1. Shape : As specified by Engineer-in-charge.2. Tensile splitting strength and breaking load as per BS : 6717-2001 3. Colour : Grey cement natural colour 4. Variation in Dimension : Less than 1.6mm.5. Variation in thickness : Less than 3.2mm b) 80 mm thick

Reinforced cement concrete M30 mix with stone aggregate 20mm nominal size mechnically mixed and vibrated for reinforced concrete work in slab in superstructure at any level excluding steel reinforcement but including center-ing and shuttering laid in position [MoRTH Specification : Clause 1000/1700]

Providing and fabricating steel reinforcement fot R.C.C works including cutting, bending, placingin position and binding complete including cost of binding wire .[MoRTH Specification : Clause 1000/1600]Cold twisted bars

Providing and laying Random Rubble masonry in foundation upto a depth of 1.50 metres and 1.50 metres above Ground /Bed level.[MoRTH Specfication: Clause 1000/1400] Cement sand mortar 1:3

Stone masonry course rubble in cement mortar (1:3)

Providing and laying Steel reinforcement at any level in foundation complete as per drawing and technical Specification.[MoRTH Specification : Section: 1600(N)] HYSD bar reinforcement

Providing weep holes in brick masonry/ plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1 V: 20 H towards drawing face. Complete as per drawing and technical specifications.

Provision of reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with concrete with HYSD reinforcement conforming to IRC: 21 and dowel bars 25 mm dia , 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST Circular No. RW/ NH- 33022/ 1/ 94- DO III dated 24th June 1994 as per dimensions in the approved drawing and at locations b) M-30 grade Concrete

Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and MoRTH specifications clause 2504. Using Stone/ Boulder weighing not less than 40 Kg., thickness not less than 150mm & specific gravity not less than 2.65.

PCC M-15 grade levelling course below approach slab complete as per drawing and MoRTH specifications clause 14.10.

Providing and laying boulders quarry stone apron without wire crates on river bed for protection against scour with stone boulders weighing not less than 40 Kg each (specific gravity not less than 2.65) complete including excavation for trimming for preparation of bed as per drawing and MoRTH specifications clause 2503.

Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on form base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures construction of drain for diversion of flowing water cost of design of RCC Precast Box and its proof checking from IIT/MNIT Jaipur complete in all respect as per specificationsBox 1.50x1.50

Providing and laying RCC M20 mix with stone aggregate 20mm (nominal size) mechnically mixed and vibrated for RCC work in slab in superstru-cture upto 4 metre above 1.5 metre level from Bed/ Ground level, excluding steel reinforcement but including centering and shuttering laid in position.[MoRTH Specification : Clause 1000/1700]

Providing & fixing Two way reflective metal body raised road studs with anchor with shank 100x100x19.8 and 2x43 pieces special reflective elements 19 degree tilted etc. complete made by swareflex at 9 m. centre to centre on edge lenes, lane lines and 1 m. centre to centre on pedestrai crossing including fixing, cost of conveyance of all materials to site including labour and hire charges for machineries involved etc. complete as per standard specifications and directions of the Engineer-in-charge..

Supply of direction and place identification sign boards made out of 2mm thick MS sheet framed to angle iron 40 x 40 x 5mm and 2 vertical posts of angle iron 65 x 65 x 6mm, 4.60m long with hold fasts including excavation and fixing with CC 1:4:8 (30 x 30 x 60cm) and transportation with painting with superior grade enamel paint of approved quality including lettering and figuring etc complete as per IRC standard size 160x180 cm (project board)

Installation of sign boards having the posts like mandantory, cautionary and informatory boards including excavation, fixing of posts in 300 mm dia. RCC hume pipe (IS marked) 1.20 m long, 75 cm embedded in ground, the in side of pipe shall be filled with cement concrete 1 : 4 : 8 with semi-circular hump at top, the pipe shall be painted white with enamel paint including transportation etc. complete. Double post

Supply & planting of shady plants (Neem, Peepal, Goolar, Jamun, Imli or other specified) along road side including the following 1) Preparation of soil including cleaning & removing of unwanted shurbs removal of stones & garbage.

LNA Infraprojects Pvt. Limited

U. K. Infra Project