CONSTRUCTION OF VALMIKI BHAVAN AT KONGANDI VILLAGE IN SHAHAPUR TALUK OF YADGIR DISTRICT.

CONSTRUCTION OF VALMIKI BHAVAN AT KONGANDI VILLAGE IN SHAHAPUR TALUK OF YADGIR DISTRICT.

Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. Tne granite/trap/basalt crushed graded coarse aggrcgates and finc aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

Providing and laying in position Cement Concrete for all Super structurcs of building, Road works, Water works, Irrigation works & super structure works of bridgcs upto 3.50 m height. The granite/'Tap...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete l:6:12 (1 cement:6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto ...

Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar:6 1 cement :6 coarse sand

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar l:4 (1 cement: + coarse sand) including cost of all materials, labour,...

Providing Mathi/Nandi wood frames of doors, windows. clercstory windows, ventilators and othe frames, TOUght, framed or assenmbled including making plaster groves (excluding cost of cement concrete an...

Providing and fixing in position fully panelled Matti/ Nandi wood shutters for doors with, stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles l100mm wide as per ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 20 mm cement plaster of mix :l:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, and removing scaffolding, including cost o...

Providing 12 mm cemnent plaster with cement mortar l:4 (l cement: 4 fine sand) to brick masonry including rounding off corners wherever required snmooth renderng, providing and removing SCa including ...

Providing 15 mm cement plaster on thc rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding of corners wherever required smooth rendering, providing and removin...

Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly broo...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 Itr/ 10 m² over an under coat of primer applied @0.75 Itr/ l0 m² of approved brand and mnanufacture to g...

Providing and laying in position Cement Concrete for levelling course for all works in toundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying vitrified loor tiles with thickncss 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid...

Providing structural steel for sub-structure complete as per drawing and technical specification (PWD SR, 2023-24, Volume-3 Item No. 12.12, p. No. 118).

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shapeof 1.20m x 0.90m size made ...

Open Conduit System: Supplying hecavy gauge PVC conduit pipc......... clia. confirming to IS 2509 with sitable size bends, junction boxes, adhesive paste ctc. . and fxing using invertcd wook boxes in ...

Supplying heavy gauge PvC Conduit Pipe ...... dia..... mm thick suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemn...

32 mm dia. 2.5 mm thick

Supplying and ming adopting loop system in existing PVC conduit / casing capping using Il00v grade COPPER Conductor flexible multistrand FRLS PVC insulated, 2x l.5 sgmm. cable confirming to GTP, with ...

b) Short Point upto 3 Meters long from tapping point to out let via. switch. (PWD DSR 2019-20, I. No.2.1.2. P.No. 5

c) Medium Point above 6 Mtrs to 10 mtrs. from tapping point to out let via. switch. (PWD DSR 2019-20, L.No.2.1.3), P.No.5

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mmn thick wood after due groove cutting, finishing with necessary cement plastering complete (PWD DSR 2019-20,...

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mmn thick wood after due groove cutting, finishing with necessary cement plastering complete (PWD DSR 2019-20,...

Wiring for lighting / power circuit using of one of FRLS PVC insulated l 100v grade, multistand copper with low conductor resistance single core wire in open or concealed system of wiring with specifi...

b) 2.5 sgmm. (PWD DSR 2019-20. L.No 233. P No 6)

c) 4.0 sgmm. (PWD DSR 2019-20, 1.No 2.3 4, PNo 6)

Supplying and fixing Regular MCB distribution boards on wall board flush mounting using required clamps bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase 3 phase sin...

b) 4 Way SP (PWD DSR 2019-20, I.No 5 18 5. P.No 28)

Supplying and fixing Miniaturc circuit breakers on existing MCB distribution boards using nccessary capacityr fxing Q" jerials and 'C' type curve, indicator ON/OFF, energy cross-3 with Short Circuit ...

b) 50-63 Amps DP

LED Indoor Supply of 2' feet LED PVC Square Batten W with high quality diffuscr with life of 25000 burning hours & 70% lumen maintenance wvith CRI 80. Power input: 220-240V a 5OHz & Power factor 0.9 a...

Supply capaCitor type ceiling fan complete with down rod blades, shakle regulator canopies etc. Ot operaton on 230 volts, 50 cycles, single phase AC Supply confirming to ISS 374-1979 and with bouble 4...

Supply of l440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V OHZ A supply 12" Sweep 300mm (PWD DSR 2019-20, LNo.7.2.1, P.No.46)

Supply and tixing PBBC Bakelite straight or slant batten holder and wiring with 60W 230 Volts Clamps PBBC Bakelite Straight etc. completed (PWD DSR 20 19-20, 1. No.4.2, P.No.20)

Supply, fixing and wiring Electronic Trivector Meter (ETC)3 to 20 amps single phase Class-l Accurcy with Temple Proof Energy Meter et. conpleted (PWD DSR 2019-20, 1.No.5.30, P.No.29)

Supply and tixing of Mm dia: Class-A GI Pipe bracket up to 2 Mirs long bent at suitable angle and 13 Supply and fixing of fixing to this bracket lx40/2x40 watts flourescent tube street light fitting o...

Fixing of all types and all capacities flourescent / false ceiling/ spot light/CFL/ LED fittings Indoor on the wall / Ceiling/ rafters/ girders using 23/0.0076" twin twisted PVC insulated wires, requi...

Fixing of celing / wvall mounting fan of all capacities and all types to the existing 'S hook with fan regulator to the board with supplying and fixing a 5 ampes ceiling rose necessary length of 23/0...

Fixing One Exhaust Fan in the nitch already left in the wall with bolts and nuts and 3 amps ceiling rose with sufficient lenght of of 23/0.0076 PVC insulated twin core wire - Exhaust Fan (PWD DSR 20 1...

ixing naogCn / metal hallide / SVL/L/ LE) lood iolht Gtine nver cxiating pole wall including clamps bolts nuts and wiring using suitalble capacity wire etc. completed Fixing i lalogen / Mctal lalide S...

Supplying and ting hylunm plastic sheet Bmm Unick with necessary nitiches for ixing swmtches. regulators erc ana Xing on cxisting wood or metal box usiny N.F.screws ctc. conpleted (PWDDh 20, L.No.3.9,...

Suppl\ng ana ung angle iron frame work fabricatcd out of M.S angle irot..and M.S lat... with bolts, washers etc, and painted with 2 coats of rcd oxide And thcn two coats of approvcd paint 0X*0KO etc. ...

Supplyng, tiang, winng, earth electrode for grounding conduits 1.C cutouts and other equipment s on the meter board using 40mm dia 2.90mmn thick G.I pipe 2.5mtr long buricd in a pit..The pit snouid oe...

Supplying and running G/ Copper conductor for grounding and along with other wires in conduit svstem of wnng uSing necessary suitable size clamps, nailsm guttas spacers etc-8 SWG GI wire etc. complete...

Supplying and fixing of class A (medium duty) GI Pipe of wall thickne ss not less than 3.25mm on pole wall drain crossing with necessary clamping arrangments for UG cale of 1.1 k 40mm etc. completed (...

Labour charges for logging UG cable 6 sqmm to 16 sqmm (PWD DSR 2019-20, 1.No.7.2. 1, P.No.46)

Supplying of 1.I KV LT UG cable XLPE or Heat resistant PvC insulated, PVC extruded Inner sheath armoured UG LT cable Part- 1. Amouring strip thickness in average +5% and resistivity l4 Ohms/Kms (Max) ...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all neceassary connecting sockets couplings/ Teels /Bends/ End caps of same materials in existing trench -63mm dia OD50mm ID etc. c...

Supplying and fixing cut out l6 amps (PWD DSR 20 19-20, 1.No.5.7, P.No.24)

Supplyng and fixing of 4 pole powder contractor 40 amps (PWD DSR 2019-20, I. No.5.13.2, P.No.26)

Supplying of TPST Withn rewireable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour (PWD DSR 2019-20, 1.No.5.5. 1, P.No.24)

Supplying 6A tlush type socket and 6 amps lush type SP switch either surface/ flush mounting in exisiting gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and iring us...