Special Repair to Bldg No P-57 (01 to 04 Qtrs) of JCOs Md Accn at New Mil Stn Kapurthala under GE Kapurthala.

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Eng in Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7/350x250x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the shade of tile, including 15 mm thick cement screed bed (1:4) complete all as specified and as directed by Eng in Charge.

M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, including 15 mm thick cement screed bed in CM (1:6) complete all as specified and as directed by Eng in Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, including 15 mm thick cement screed bed in CM (1:6) complete all as specified and as directed by Eng in Charge.

M&L for machine cut kota stone for cooking platform and flooring 18-20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing, bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe complete all as specified and as directed by Eng in Charge.

M&L for rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Eng in Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and as directed by Eng in Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed by Eng in Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Eng in Charge.

Use and waste of formwork to chajjas and similar items including edges for rough finished surfaces complete all as specified and as directed by Eng in Charge.

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick work or concrete surfaces incl raking out joints complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and fair complete all as specified and as directed by Engr-in-Charge. Note : WPC shall be measured and paid separately.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement in ceiling etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling over a coat of birla white putty complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of whitewash complete all as specified and directed by Engr-in-Charge

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distermper complete all as specified and directed by Engr-in-Charge

M&L applying two coats of cement base paint on old plastered or unplastered wall surface including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection finishing the surface even and fair complete all as specified and as directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate 100mm thick as in sub base complete all as specified and as directed by Engr-in-Charge.

Applying evenly a tack coat of industrial bitumen 85.25 @ 1.20 Kg/sqm including cleaning surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engr-in-Charge.

M&L for PCC type B-0 (1:2:4) (12.5mm stone graded stone aggregate), 40 mm thick as in floor for receiving top finishing layer of ceramic tiles for sunken portion finished rough complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but not exc 4sqm each complete all as specified and as directed by Engr-in-Charge.

Supply and fixing solid PVC door frame factory made of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specifications all as per SSR Part-I as specified and directed by Engineer-In-Charge

Supply and fixing factory made solid panel PVC moulded door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing including fittings all as specified and directed by Engineer-in-Charge

Supply and fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 155 x 60mm filling hollow frame all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-2 as in filling of chowkhats complete all as specified and as directed by Engineer-in-charge.

Supply and fixing factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in-Charge

S&F for PVC cupboard frame of size 75mmx40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and as directed by Engr-in-Charge.

M&L for prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with thikness 18mm, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge. Note: Timber framework included in this item.

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and as directed by Engr-in-Charge.

S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and as directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and as directed by Engr-in-Charge. Fabrication & fixing arrangement shall be as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item. (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and as directed by Engr-in-Charge. Note: Wire mesh and painting shall be measured and paid separately under appropriate item.

S&F Steel Ventilator 1.25mm thick Box Type fixed type prepared for fixing of gauzed and glass ( primer coated) ERW hollow P section of size 60mm x 25mm including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each vent ) including following fitting welded to frame shutter :- (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per vent (b) Handles of Z Sec 20mm x 100mm long (c) Stay (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings and complete all as specified and as directed by Engr-in-Charge. Note : Wire mesh/glass pane and painting shall be measured and paid separately under appropriate items of schedule.

S&F 3.00mm thick acrylic sheet as in glasses in squares not exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engineer-in-charge.

S&F 4.00mm thick figured glass, pinhead type in squares not exc 0.5 sqm each pane and glazing with oil putty complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and as directed by Engr-in-Charge.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and as directed by Engr-in-Charge.

S&F in repair 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and as directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair 20mm dia aluminium chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC (SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and as directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and as directed by Engr-in-Charge.

S&F in repairs shower rose 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and as directed by Engr-in-Charge.

S&F in repair kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge.

S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and as directed by Engr-in-Charge.

S&F soap dish chromium plated heavy duty complete all as specified and as directed by Engr-in-Charge.

S&F in repair 25mm MS curtain rod mild steel chromium plated with fixing brackets complete all as specified and as directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and as directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings complete all as specified and as directed by Engr-in-Charge.

Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length laid in floor complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as specified and as directed by Engr-in-Charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

S&F 110mm PVC(SWR) vent cowl complete all as specified and as directed by Engr-in-Charge.

Dismantling water tank PVC 500 ltrs and removing from site complete all as specified and as directed by Engr-in-Charge.

Supply and fixing rotational moulded polythelene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-1 of 500 ltrs capacity including fittings complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair gunmetal globe and gate valve with iron wheel head, screwed both ends for iron pipe 20mm fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (minimum weight 25mm-455gms) complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and as directed by Engr-in-charge.

Demolition of mud in roof any thickness including plastering & leeping removed complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surface even and fair with waterproofing compound complete all as specified and as directed by Engr-in-Charge. Note : (Water proofing compound will be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multi polymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10cm) complete all as specified and directed by Engr in charge.

M&L for 40mm thick brick tiles laid on 15mm thick screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and as directed by Engr-in-Charge.

All as per item no 92 above but except brick tiles complete all as specified and as directed by Engr-in-Charge.

Material and labour for 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete Type B-0, 1:2:4 (12.5mm graded stone aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work (timber work included in item) in any situation as in cup board shelves/shutter, kithen cabinet shutter or similar work inclding dismantling of old board in any position, complete all as specified and as directed by Engr-in-Charge.

M&L for providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges with binding machine etc complete all as specified and as directed by Engr-in-Charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch complete all as directed by Engineer-in-Charge.

(b) One fan point controlled by one, one way switch complete all as directed by Engineer-in-Charge.

(c) One socket outlet 3 Pin, 5 Amp on independent board complete all as directed by Engineer-in-Charge.

(d) One socket outlet 3 Pin, 5 Amp on same board complete all as directed by Engineer-in-Charge.

(e) One bell point controlled by one bell push complete all as directed by Engineer-in-Charge.

(f) One light point controlled by one, two way switch complete all as directed by Engineer-in-Charge.

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board complete all as directed by Engineer-in-Charge.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as directed by Engineer-in-Charge.

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as directed by Engineer-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as directed by Engineer-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked) complete all as directed by Engineer-in-Charge.

S&F switch piano flush type single pole two way 5 Amp complete all as directed by Engineer-in-Charge.

S&F Bell push flush type single pole one way 5 Amp complete all as directed by Engineer-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) complete all as directed by Engineer-in-Charge.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engineer-in-Charge. Make: Crompton/ Bajaj/ Philips or equivalent as mentioned in Appx B-1.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt complete all as directed by Engineer-in-Charge.

Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge,

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specified and as directed by Engr-in-charge. Make : Wipro/Havells/Bajaj or equivalent as per list of makes in Appx B-1

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and as directed by Engr-in-Charge. Make-BAJAJ, HAVELLS, USHA or equivalent as per list of makes in Appx B-1

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

MCB, 10 to 32 Amp, SP, 240 Volt complete all as specified and as directed by Engr-in-Charge. Make - Legrand/Schneider-Acti 9/Siemens-Betagard or equivalent as per list of makes in Appx B-1

MCB, 25 to 32 to Amp, SPN, 240 Volt complete all as specified and as directed by Engr-in-Charge. Make - Legrand/Schneider-Acti 9/Siemens-Betagard or equivalent as per list of makes in Appx B-1

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed by Engr-in-Charge.

Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed by Engr-in-Charge.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engr-in-Charge. Note :- For measurement purpose total 18cm will be considered.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and as directed by Engr-in-Charge.

Supplying and Fixing Steel Tubes, 'light grade', galvanised, with all fitting, laid in trenches bore of tube being 40 mm complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable sub main wiring of any sizes and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.)

Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed by Engr-in-Charge.

Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN) including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-

INCOMING :- (i) MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No of Make : Havells/C&S electric/Legrand/Siemens. (ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos (iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos.

OUT GOING :- (i) MCB 63 Amp,415 Volt,10 KA, Single pole and neutral -04 No Make : Legrand/Siemens/Schnedier (ii) Refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge - 04 Nos

COSMO BUILDERS (BID ID -3168693)

G M BUILDERS 36 (BID ID -3168504)

SUNRISE ENGINEERS AND CONTRACTOR (BID ID -3168900)