REPAIR /MAINT OF FOOTPATH, BOUNDRY WALLS, COMPOUND WALL, IRON GATES AND DRAINS ETC IN DOMESTIC AREA AT AF STN SURATGARH

Amount

BOQ (Repair / maint of Footpath, Boundry walls, Compound wall, Iron gates and Drains etc in Domestic Area at AF Stn Suratgarh)

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe-290(Gde E-165), complete all as specified and direcetd.

Demolition of stone slabs/ tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for 18-20 mm thick Granite stone slab (as approved) machine cut( table rubbed and polished) in vertical surfaces such as steps ,jambs,pillars, laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone. Complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. Complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5m interval and at each corner, the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Taking down cement plaster of any description on brick or stone wall as in boundary wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer in Charge.

M&L for 15 mm thick rendering in cement morter 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement all as specified and directed. (WPC shall be measured and paid seperately).

M&L for preparation of new plastered of wall and applying two coats of exterior acrylic emulsion (weather proof coat ) paint of approved quality, in camouflaging/plain patterns, over new plastered surfaces , including applying a coat of primer,complete all as specified and directed.

M&L for complete removal of existing treatment on old surface of wall and applying two coats of exterior acrylic emulsion (weather proof coat ) paint of approved quality, in camouflaging/plain patterns, including applying a coat of primer. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per ser item No 12 above here-in-before but except brick, complete all as specified and directed. (Old bricks will be reused after cleaning etc).

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone agg as in copings, kneelers complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed by the Engineer-in-Charge.

Dismantling posts or struts embedded (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground. Complete all as specified and directed.

M&L P:C:C 1:4:8 type D2 ( using 40mm graded crushed stone agg) as in lean concrete in foundation, filling and mass concrete. complete all as specified and directed.

M&L for mild steel angle iron posts and struts conforming to Fe-290 Grade E-165 as in fencing post including cutting tops to required shape,drilling holes,notching for wire etc including all necessary drilling of similar work complete all as specified and directed.

M&L for painting new steel/iron surfaces of any subscription over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of the surface complete all as specified and directed.

Supply only 10 mm dia MS round bars as in strengthening bars for chain link fencing complete all as specified and directed.

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm but not exc 10 cm long, dia of shank 11mm to 16 mm complete all as specified and directed.

Supply only chain link fencing of size as directed of galvanised steel wire mesh made up in mattress or cages ,lapped wire. complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed by Engineer –in-Charge.

Supply and fix in repairs galvanised 2 strand steel barbed wire 2.24 mm dia , barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured)

All as per item no 25 here-in-before but restraining re-securing including making good staples etc. Complete all as specified and directed by Engr-in-charge(Each line wire to be measured)

M&L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 75 mm thick in sub base,flooring, pavings etc complete all as specified and as directed.

M & L 60mm thick factory made cement concrete paver block of M-35 grade with approved colour, design & pattern made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specfied and as directed.

M & L 80mm thick factory made cement concrete rubberised paver block of M-40 grade with approved colour, design & pattern made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Dismantling of paver blocks and refixing of the same incl provn of fine sand of layer 25 mm thick. complete all as per directed by engr-in- charge

Material and labour for precast Reinforced cement concrete block 75 mm thick for drain cover of size as directed incl angle iron frame all around of size 75 x75 x 6 mm and two no of hook of 6 mm dia bar etc. complete all as specified and directed. Note: a) Reinforcement shall be measured and paid for seperately. b) Formwork if any is included in the quoted rate.

M & L factory made kerb stone of M-25 grade cement concrete of size as directed fixed in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves. Complete all as specified and directed.

M&L for chequered cement concrete tile 30cmx30xcmx25mm thick set, jointed and pointed in cement slurry with grey pigment cement and pigments laid over screed bed 20 mm thick in CM 1:6 as in floors complete all as specified and directed by engr-in-charge

Supply and fixing 35 mm thick Precast cement concrete louvers and jallies in Cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) (as per sample) fixed on wall in cement mortar 1:4 including two coats of cement base paint in camouflaging patterns to match the shade with old jafri wall complete all as specified and directed.

Supply and fixing informatory Sign board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame 25 x 15 mm min thickness 20 gauge pipe with 35 mm dia stainless pipe in outer border (min thickness 1.5 mm) and all around retro reflective high intensity 400 micron thick blue/white colour sheet pasted with heating process on both sides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter as directed by Engr in charge incl 02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish (min thcikness 2.00 mm) with MS plate 3 mm thick welded at bottom of pipes (the height of board shall be 3.0 mtr top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of Size 300mmx300mmx600mm including taking down existing sign board. complete all as specified and directed.

Supply only TMT Reinforcement bars of size 6 to 8 mm dia. Complete all as specified and directed by Engr in Charge.

Supply only Water proofing compound. Complete all as specified and directed by Engr in Charge.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents.

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3392668)

Bhawani Enterprises (BID ID -3392800)

M/s Shubham Enterprises (BID ID -3392725)

H S BUILDERS (BID ID -3399908)

SRI SAI CONSTRUCTION COMPANY (BID ID -3391858)