PROVIDING CANAL BASED WATER SUPPLY SCHEME FOR SIRSALI GROUP OF 12 NO VILLAGES CONSTRUCTING CANAL BASED WATER WORKS AT VILLAGE SIRSALI BHOPALI DISTT CHARKHI DADRI

Amount

WATER TREATMENT PLANT (WTP) Design & construction of automated PLC with SCADA controlled water Treatment plant of 3.00 MLD capacity at Water Works Sirsali including remote terminal units (RTU’s) for raw water Pumping station & IBS-1 Kakroli Hukmi having synchronization with SCADA of Sirsali water works, comprising of interconnecting DI pipe from raw water pump to inlet box of WTP & WTP to CWT & Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per NIT (Sluice valves of make IVC/VAG)

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame RAW WATER PUMPING STATION 5300 LPM X 50 M. Head

WATER WORKS SIRSALI 2200 LPM X 12 M. Head

CLEAR WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS SIRSALI 2300 LPM X 40 M. Head

400 LPM X 40 M. Head

400 LPM X 25 M. Head

IBS - 1 KAKROLI HUKMI 400 LPM X 30 M. Head

1100 LPM X 40 M. Head

600 LPM X 35 M. Head

1200 LPM X 30 M. Head

V.B.S. (VILLAGE BOOSTING STATIONS) 400 LPM X 35 M. Head

600 LPM X 35 M. Head

700 LPM X 35 M. Head

800 LPM X 35 M. Head

900 LPM X 35 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items For 2 no Pumping Sets of 5300 LPM x 50 m Head a) Main switch 500 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 5300 LPM x 50 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 2.1

For 2 no Pumping Sets of 2200 LPM x 12 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2200 LPM x 12 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 2.2

For 2 no Pumping Sets of 2300 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2300 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.1.1

For 2 no Pumping Sets of 400 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.1.2

For 3 no Pumping Sets of 400 LPM x 30 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400LPM x 30 m Head = 3 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref no. 3.1.3

For 2 no Pumping Sets of 500 LPM x 30 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 30 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.1

For 2 no Pumping Sets of 1100 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1100 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.2

For 2 no Pumping Sets of 600 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.3

For 2 no Pumping Sets of 1200 LPM x 30 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1200 LPM x 30 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.4

For 2 no Pumping Sets of 400 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.1

For 2 no Pumping Sets of 600 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.2

For 2 no Pumping Sets of 700 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 700 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.3

For 2 no Pumping Sets of 800 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.4

For 2 no Pumping Sets of 900 LPM x 35 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 900 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.5

Supply, erection, testing IS marked copper wire for various motor with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc. i) 6mm2 3core

ii) 10mm2 3core

iii) 16mm2 3core

iv) 25mm2 3core

v) 35mm2 3core

Sluice Valves / NRV & specials for Pumping MachinerySupplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 100 mm i/d

Supplying, fixing of DI swing check type reflux (non returned valve) PN 1.6 of IVC/VAG make 100 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 100 mm i/d

Supply and fixing following C.I. DI CI D/F Pipes including cost of jointing materials, excuvation laying jointing refilling including making adequate support of masonary/concrete steel for delivery land suction pipe from bell mouth in the suction/scour well to the rising main laid by the department as per plan shown from the foundation wall of he pump chamber for all the raw water and clear water pumping sets at water works as per specification given in schedule no.II 100 mm i/d

Sluice Valves/ Specials For Head works & Rising Mains Kiriloskar DVD Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) For Head works & Rising main lines 150 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect. 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all resct ( 2 at Raw water pumping Station + 4 water works + 3 at IBS-1 + 10 at Various VBS = 19 )

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect for various Pump Chambers ( 2 at Raw water pumping Station + 4 water works + 3 at IBS-1 + 10 at Various VBS = 19 )

Supply, Erection, Testing of reputed make LED light 100 wats with fitting and accessories complete in all respect (Bajaj/Phillips/Crompton)

Supply erection, and commissioning electric operated dewatering pump of 3 HP Kirlosker make complete from priming with wiring starters switches etc. also the required GI pipe (B Class) valves and sight glass etc. complete. ( 1 at RW P/Stn + 1 at W/W = 2 no.)

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. 3 Ton Capacity at RW P/Stn + Water Works

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Providing & fixing S.S floating arme 350 mm size along with swivel bend as per required specifications approved by Engineer-in-Charge

Supplying, fixing, jointing, testing & commissioning of MS sluice Gate valves as per DNIT specification including cost of jointing material (IVC / VAG make) 450 x 450 mm size

Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule- IV for a period of 5 Years after 12 months during defect liability period and 3 months trail run period (will be charge to the A/Mtc Estimate) Operation and maintenance during defect liability period (Operation Only) after 3 Months trail run period

For 1st year Operation and maintenance after defect liability period

For 2nd year Operation and maintenance

For 3rd year Operation and maintenance

For 4th year Operation and maintenance

For 5th year Operation and maintenance

Bidder Name

Amount

MAHA LAXMI CONSTRUCTION COMPANY

M/S SHREE BALAJI BUILDERS

ANAND KUMAR CONT

ANAND KUMAR CONT

M/S SHREE BALAJI BUILDERS

ANAND KUMAR CONT

MAHA LAXMI CONSTRUCTION COMPANY