Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.6 LAccepted-AOC PANCHARATNA APTS NEAR SHITALADEVI MANDIR BHAGUR NASHIK 422401 | NASHIK | NASHIK | MAHARASHTRA | 422401 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹78.9 L+₹2.2 L (2.83%)Rejected-Finance VARAD PLOT NO 11 DURGA NAGAR KAMATHWADE NASIK 422010 | NASHIK | MAHARASHTRA | 422010 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | Rejected-Technical 01 18 19 ANANDVAN ROW HOUSE LAM ROAD NASHIK ROAD NASH IK ROAD SAUBHAGYA NAGAR NASHIK MAHARASHTRA 422101 | NASHIK | MAHARASHTRA | 422101 | - | Rejected-Technical NOT RECOMMENDED FOR OPENING OF BID DUE TO ADVERSE REMARKS IN HQ CEEC WLR QE JUN 2022 | |
| 4 | Rejected-Technical | - | Rejected-Technical NOT RECOMMENDED FOR OPENING OF BID AS TWO CLASS BELOW ELIGIBLE CLASS | |
| 5 | Rejected-Technical FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | - | Rejected-Technical NOT RECOMMENDED FOR OPENING OF BID AS TWO CLASS BELOW ELIGIBLE CLASS |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_547662_1
83605/E8
Open Tender
Civil Works
Item Rate
270 days
NASIK
AS PER NIT
7 documents required · 7 mandatory
₹1,000
Yes
GE NASIK ROAD CAMP
₹1.8 L
Yes
10 Nov 2022
25 Aug 2022
1 Oct 2022
25 Aug 2022
29 Sept 2022
15 Sept 2022
26 Aug 2022 - 5 Sept 2022
Amount
M&L for 2nd class hardwood exc 13 Sqcm and n exc 25 Sqcm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed
S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed
S&Fsecond class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.
Material & Labour for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of wooden surfaces all as specified and directed by EIC.
S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed
S&F Aluminium alloy anodised barrel tower bolts 200mm long complete all as specified and directed
S&F MS butt hinges 100mm size medium weight complete all as specified and directed
S&F aluminium alloy barrel tower bolt 150 mm long complete all as specified and directed
S&F 150 mm extruded aluminium alloy handels complete all as specified and directed
S & F 75 mm long medium weight, cold rolled mild steel Butt hinges. complete all as specified and directed
S&F 75 mm extruded aluminium alloy handels complete all as specified and directed
S&F in repairs 1st class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge
Blank
Blank
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing.
S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh in opening all as specified and directed by Engr-in-Charge
S&F Sheet glass ordinary quility 3 mm thick n exc 0.5sqm each pane and glazing with oil putty complete all as specifed and directed
S&F Sheet glass ordinary quaility 3 mm thick n exc 0.5sqm each pane and glazing with oil putty incl hacking out old glass complete all as specifed and directed
Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.
Taking down chowkat or frames with shutters (without taking off shutters from the frame) but n exc. 1.5 Sqm
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
Taking down carefully existing bitumen tar felt incl. Screed bed and cleaning of surfaces of roof etc. with wire brush incl. flashing and junctions of parapets/kerb walls etc. and removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.
M & L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or sub base
M&L Plastering 15mm thick in cement mortar (1:4) on concrete surfaces mixed with water proofing liquid and smooth finished and smooth(without using extra cement).
M&L for waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with aluminium paint @ 0.15kg/sqm
Supply only liquid water proofing compound
Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.
M&L for joint free coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately
M&L for coloured glazed ceramic tiles 300 x 200 x 7-8mm / 300 x 450 x 7-8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match
M & L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floors finishes
M&L for 10 mm thick rendering in CM 1:4 on brick masonary or concrete rough finished surfaces as backing coat
Taking up or down tubes galvanized iron and connections and removing/shifting from site incl cleaning where directed complete all as specifed and directed
(a) 20 mm dia
(b) 15 mm dia
Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed
(a) 20 mm dia
(b) 15 mm dia
S/F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-
(a) 20 mm dia
(b) 15 mm dia
S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed
S&F in repair 15mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe
M&L for hand cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete Note: screed bed layer measured seperately complete all as specifed and directed
Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work
S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed
S & F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
Dismantling water tanks of capacity Exc 500 Ltrs but n. exc 1000Ltrs and removing to from site or to store complete all as specified and directed.
S/F Rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) triple layered ISI marked hoisted and fixed in position .
S&F 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule
Taking down 100/75 mm dia PVC/CI sand cast soil, waste and vent pipes, in any length with or without etc in any position
S&F PVC (SWR) pipe single socketed any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed
S&F of PVC(SWR) bends of any radius
(a) 75 mm dia
(b) 110 mm dia
S&F of PVC(SWR) branch piece,single(single Y) 110 mm dia equal or unequal
S&F of PVC(SWR) vent cowl of 75/ 110mm bore
S and F 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.
S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed
S&F 75 mm dia PVC(SWR) floor trap,plain with grating including jointing with solvent cement
S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)
S & F in repairs Vitreous china wash down water closet (pedestal pattern), white including plastic water closetseat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed.
S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.
S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mmx330mmx160mm complete all as specifed and directed
S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors
S&F in repair vitreous china urinal half stall type white including flushing cistern, flush pipe, waste pipe complete all as specifed and directed
S/F PVC connections 15mm size with PTMT nuts of length 300mm.
S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed
M&L granite (of any type)work (table rubbed and polished) 20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite
M&L for preparation of old painted surfaces of any description by complete removal of existing treatment and applying three coats of white wash on undecorated surfaces of walls/ceiling complete all as specified and directed.
Material & Labour for painting with one coat of synthetic enamel paint on old wooden surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by Engineer-in-Charge.
Material & Labour for painting with one coat of synthetic enamel paint on old surfaces of walls exc 10cm width or girth including preparation of old surfaces of walls all as specified and directed by Engineer-in-Charge.
Supply & Fixing in repairs stainless steel curtain rails of 25mm dia metre stops, rollers etc all as specified and directed.
Supply & Fixing in repairs stainless steel brackets of 25mm dia metre stops, rollers etc all as specified and directed.
S & F stainless steel Soap dish of standard size with screws complete all as specified and directed
M&L for special treatment to sunken portion with 10 mm thick plaster in cement mortar 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.
M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.
S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land
M&L for rendering 10 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
Blank
Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed
S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws with washer complete all as specified and directed
S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed
M and L for clean sawn framed timber Second class hard-wood in scantlings
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work
M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm complete all as specified and directed
S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm with non asbestos cement pre-painted building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction” complete all as specified and directed
S&F Machine cut kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in floor concrete complete all as specifed and directed
M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
Taking down shutters exc 1 Sqm but n exc 2Sqm
S & F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed
M&L for complete removal of old painted surface of walls by washing, rubbing down, stopping and applying two coat of oil bound distemper over a thin layer of wall care putty over a coat of alkali resistant primer coat prepatory to distemper on walls
M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning, prepatory to distempering complete all as specified and directed.
Taking down shutters area n exc 1.00 Sqm
S & F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed
S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed
M and L for 75mm thick PCC (1:3:6) type C-2 using 40mm grade stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.
M and L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles
M&L for Random rubble mesonry, uncoursed well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
Raking out joints/ pointing to in cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses
S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed
M and L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and depositing in safe custody of MES AGE E/M Store Yard, all as per specified and directed by Engr-in-Charge
Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.
Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
(a) One light point controlled by one, one way switch
(b) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
(c) One ceiling /exhaust fan point controlled by one switch and regulator
(d) One 3 pin 5 amp socket out point on the same board with other switches.
(e) One3 pin 5 amps socket out let point on independent board
All as per same in item No111 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
S &F Switch piano flush type single pole one way 5 amps.
S &F Switch piano flush type single pole two way 5 amps.
S &F Socket outlet 2 in 1, 3 pin, 6A
S &F Switch socket combination 2 in 1, 6A flush type
S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .
S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
S &F Electronic regulator 100/120 Watt step type
S &F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.
S&F in repair 20 W LED 6500 K (PRIDE PLUS) inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells Cat Part No-LHEXACP7FN1W020 or equivalent.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including 3 core copper cable & cutting holes/ circular opening in brick, stone wall and making good to disturbed surfaces if required etc, complete all as specified and directed by Engr-in-Charge (Make : Havells/Crompton/Bajaj )
Supply and fix water heater storage type, electric, capacity 50 litres. BEE 5 star rated, steel body with inner tank and heating element complete with all accessories such as safety valve, hermostate, NRV, connection piece etc including taking down old water heater storage type and depositing in safe custody of MES AGE E/M Store Yard
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make- Havells/Crompton/Usha/Philips
S & F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
Fabrication,supply & fixing of GI pipe bracket up to 25 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.
S & F 4 way TP&N Vertical Loadline DBs in double door suitable for FP MCCB with Range upto 160 A , breaking capacity : 16 kA , Bus Bars, Neutral Links, Blanking Plates without MCCB, complete all as specified and directed by Engr-in-Charge.
S&F Sheet metal enclosure factory made for DBs Triple pole and neutral double door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
Supply and fix for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps
S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.
S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.
S & F in repair MCCB, 63 Amps , 415Volts, 16KA ,4 pole.
S & F in repair MCCB, 100 Amps , 415Volts, 16KA ,4 pole.
M&L Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts ,nuts ,check nuts and washers including earthing pit , charcoal, common salt ,earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work of any type of soil/strata all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out, complete all as specified and directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.
Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.
Material and labour for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50mm suitable for cable protection complete all as specified and directed.
Supply laying & testing cable XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross-sectional area 35 sq. mm 4core including taking down of old unserviceable cable.
Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, MS clamps complete with IP 65/66 protection including GI bracket of suitable size and including taking down old unserviceable security light and GI bracket, complete all as specified and directed by Engr-in-Charge.
S&F GI water tubing 50mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.
Supply and fix in replacement steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 meters long). including two coats of synthetic enameled paint over a coat red oxide primer complete all as specified and as directed by Engr-in-Charge.
M&L for Cement concrete in foundation of poles streets and stays 1:4:8 type D-2 using 40 mm graded crushed stone aggregate all as specified directed.
M&L for Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping and stay assembly all as specified directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .