ADDN ALTRATION INCL REPAIRS TO JCOs OR MD ACCN HAMID VIHAR AT JAIPUR

Amount

Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as specified & directed.

Dismantling of cement concrete tiles,glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level incl removing the rubbish outside MD land complete all as specified & directed.

Demolition of cement concrete in any description and in any position, not otherwise specifically provided for incl removing the rubbish outside MD land complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work not exceeding 15 cm thickness & removal all rubbish material outside of MD Land complete all as specified and directed.

Demolition of reinforced cement concrete reinforced roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work incl removal all rubbish material outside of MD Land complete all as specified & directed.

M&L rendering 15 mm thick in CM 1:4 on brick masonry surfaces on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed..

'M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even etc complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 including dubbing coat as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .

M&L rendering 5 mm thick in CM 1:3 n exc 3.00 sqm each patch in ceiling patches in ceilling finished even and smooth without using extra cement complete all as specified and directed

Taking down and re-fixing after easining to shutters of any description exceeding 1 sqm and n.exceeding 2 sqm each in the same opening complete all as specified & directed.

Roughning of old concrete floor by picking ,sweeping and washing down with water to remove dust etc complete all as specified & directed.

'M/L for brushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified & directed.

M & L for 5-7 mm thick screed bed of chemical adhesive of approved make for laying floor finishes i.e. floor tiles etc. complete all as specified & directed.

M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. using approved chemical adhesive coloured cement to match the shade of tile complete all as specified and directed. Note (Adhesive shall be measured & paid seperately)

M&L for non skid coloured ceramic matching tiles 9 to 9.5mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc using approved chemical adhesive coloured cement to match with coloured tiles complete all as specified and directed. Note : (Adhesive shall be measured & paid seperately)

M&L 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified & directed.

M & L for 10 mm thick rendering in CM 1:4 for laying wall tiles etc complete all as specified & directed.

M&L coloured Glazed ceramic tiles in verticle surface (300x600mmx7mm) thick, as in dado etc laid in concept/pattern using highlighters set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed .

M&L coloured Glazed ceramic tiles of size 600 x 100x 9-9.5mm on vertical surfaces as in skirting etc set and jointed in neat cement slurry complete all as specified and directed by Engineer-in-Charge.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles/kota stone etc complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick of size 550 x 550 mm in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified & directed.

M&L for grinding/cutting old Kota stone surface rubbing and granite polishing with (bee wax polish) complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick in steps in single piece laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified & directed.

Ditto as item No 26 above but in risers to steps, skirting over & incl rendering 10 mm thick in CM 1:4.

Rounding to edges of stone slab such as in steps ( Kota stone) one edge complete all as specified & directed.

M&L 15-16 mm thick Granite work (table rubbed & polished) in cooking plat forms & edges in single piece over marble slab of thickness 12 mm (Torrento) glued with approved adhessive (Araldite) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified & directed. (Note : 12 mm thick marble shall be measured & paid seperately)

M&L for 12mm thick marble slab as in cooking platforms as base to granite top placed on vertical marble partitions fixed with approved adhesive (Araldite) complete all as specified & directed.

M&L for 25mm marble slab as in vertical partitions , between kitchen cooking plat form and raised platform of kitchen, under kitchen platform complete all as specified & directed.

M&L for 12mm marble slab as in raised plat form of kitchen platforms laid over CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of marble complete all as specified & directed.

Rounding to edges of stone slab ( granite) two edges such as in cooking platform complete all as specified & directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board with one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessive including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified & directed.

S & F 8 mm thick HDHMR (High density high moisture resistant) board with one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified & directed.

S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified & directed.

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed

S & F 4 mm thick glass not exc 0.5 sqm in each pane as in cabinet shutters fixed with beads of approved make complete all as specified & directed

S & F in repair kitchen sinks made of stainless steel sheet 20 guage of grade SS-304 incl washer, brass sink coupling, waste pipe, bowl size 450 x 600 x230 mm fixed in kitchen granite top incl cutting granite/ marble of cooking platform complete all as specified & directed.

S & F kitchen sinks made of stainless steel sheet 20 guageof Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, bowl size 450 x 600 x230 mm fixed in kitchen granite top incl cutting granite/ marble of cooking platform complete all as specified & directed.

Taking up or down 15mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed by Engr-in-Charge

Taking up or down 25 mm steel tubing and connections complete all as specified and directed by Engr-in-Charge

Taking up or down 40 mm steel tubing and connections complete all as specified and directed by Engr-in-Charge

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

Fixing only after cleaning 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.

Fixing only after cleaning 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.

Fixing only after cleaning 25 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps 15mm bore long body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make-Hindware cat part No. F330011,Make-Cera cat part No. F2002152, Make-Marc cat part No. MUN1030.

S&F in repair bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make-Hindware cat part No. F330003,Make-Cera cat part No. F2002151, Make-Marc cat part No. MUN1030.

S&F in repair bib taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed. Make-Hindware cat part No. F330024,Make-Cera cat part No. F2002261, Make-Marc cat part No. MUN1090.

S&F in repair pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make-Hindware cat part No. F330034,Make-Cera cat part No. F2002104, Make-Marc cat part No. MUN1010

'S&F in repair brass CP towel rail 20mm dia, D type 60 cm long complete all as specified and directed.

S&F SS towel ring 'R' type including Chromium plated brass screws & plastic rawl plug complete all as specified and directed.

S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs, PTMT alloy bathroom cabinet with mirror of overall size 300 x 450mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 100mm x 100 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed. Make-Hindware cat part No.RN ,Make-Cera cat part No. F7020307CH,F7040101, Make-Marc cat part No. MUN1240 and 1260

S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified & directed. Make-Hindware cat part No. F330043,Make-Cera cat part No. F2002201, Make-Marc cat part No. MOR1060A .

S&F in repairs 15mm bore PVC connections, with Brass nuts of length 450mm complete all as specified and directed.

S&F in repair 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 25mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S & F wall mixer CP hot & cold, 15mm bore with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. Make-Hindware cat part No. 78 (contessa plus),Make-Cera cat part No. F2002401, Make-Marc cat part No. MUN1141

S & F 250 mm Corner Glass shelf with brass brackets complete all as specified & directed.

S&Fin repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified & directed.

'S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

'S&F in repairs vitreous china wash hand basin white flat back size 550 x400 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe complete all as specified & directed.

S&F vitreous china wash hand basin white flat back size 550 x400 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe & including 32mm waste coupling complete all as specified & directed.

'S & F 32 mm bore brass CP grating with long shank for wash hand basin complete all as specified & directed.

S& F 32 mm bore PVC waste pipe 75 cm long of approved complete all as specified & directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal of all rubbish material outside of MD Land complete all as specified and directed.

M & L brick work using Subclass B bricks exc. 6 m mean radius on plan built in cement mortar 1:6 complete all as specified and directed.

M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:4 complete all as specified and directed.

M&L for random ruble uncoarsed stone masonary well bonded , bedded and solidly hearted built in CM 1:6 complete all as specified & directed.

M&L for keyed pointing to random or polygonal rubble or uncoarsed or brought to up to coarses in CM 1:4 complete all as specified & directed.

Dismantling of 75mm bore cast iron soil/waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 75mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 160mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete incl packing the hole of chullah hood all as specified and directed.

Dismantling of 75mm bore PVC soil/waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 110mm bore PVC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls complete all as specified & directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.

S&F75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls complete all as specified & directed.

S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.

'S&F 110 mm dia PVC (SWR) bends any radius complete all as specified & directed.

S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified & directed.

S&F 75mm dia PVC (SWR) branch piece, double (double y) complete all as specified & directed.

S & F 110 mm dia PVC (SWR) bends with ducks foot complete all as specified & directed.

S&F PVC (SWR) reducers (110 x 75 mm) complete all as specified & directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified & directed.

S&F 75 mm PVC (SWR) vent cowl complete all as specified & directed.

S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified & directed.

S& F Salt glazed stoneware gully traps of size 150x150 , square or round mouthed, type‘P’ complete all as specified & directed.

S&F PVC clamps for rain water , soil, waste pipe incl bolts if required for securing/ holding in position pipes of dia 75 mm complete all as specified & directed.

S&F PVC clamps for rain water , soil, waste pipe incl bolts if required for securing/ holding in position pipes of dia 110 mm complete all as specified & directed.

S & F MS CP Grating doom 125 mm dia with waste hole complete all as specified & directed.

S & F MS CP Grating doom 125 mm dia complete all as specified & directed.

Dismantling of PVC Water tank up to cap 500 Lts & removal of all retrieved material complete all as specified & directed.

S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), two layered, hoisted and fixed in position complete all as specified in SSR Part I complete all as specified & directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .

S & F 35mm thick flush shutters solid core construction with block board and plywood face panels, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions complete all as specified & directed.

M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified & directed.

S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately

S&F 25 mm thick HDHMR board (of action tesa or Greenlam ply) door shutter with both side decorative laminate incl 25 mm wide and 0.8mm thick edge band of Rehau make or equivalent complete all as specified & directed.

S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters complete all as specified & directed.

S&F aluminium mesh of wieght exc.0.55 Kg/Sqm as support to SS wire cloth complete all as specified & directed.

S &F Framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (Ladders, door frames and cooler stands etc) complete all as specified & directed.

S & F MS butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.

S & F SS butt hinges 100mm size medium weight and fixed as directed and specified.

S & F MS butt hinges 50 mm size cold rolled medium weight and fixed as directed and specified.

S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified & directed.

S & F SS handles cast moulded type 150mm size fixed with screws complete all as specified & directed.

S & F SS barrel tower bolts not less than 12 mm dia of extruded section, 200mm long complete all as specified & directed.

S & F in repair 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified & directed.

S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified & directed.

S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified & directed.

S & F in repair Helical door spring 150 mm long including roller and roller plate complete fixed to angle iron chowkats complete all as specified & directed.

S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement fixed with 100mm long fasteners with chemical grouting incl 12 mm dia verticak rod incl spray painting in factory in wood finish pattern complete all as specified & directed.

Casement Window size - 1800*1200 mm : uPVC window with having two glass panel openable outside with inside pull down mesh(1150 * 1200mm).Rest part in coupling window which is having top portion fixed and bottom openable glass panel window size 650 *650 mm with pull down mesh for desert cooler all as specified in Above item.

Casement fixed cum top Hung Window size - 400*900 mm : uPVC window with having bottom part fix & top part openable glass sash with pull down mesh size 400*450mm all as specified in Above item.

Casement openable Window size - 600*1200 mm : uPVC window with single openable glass sash with pull down mesh size 600*1200 mm all as specified in Above item.

Casement Window size - 1500*1700 mm : uPVC window with having two glass panel openable outside with inside pull down mesh(850 * 1700mm).Rest part in coupling window which is having top portion fixed and bottom openable glass panel window size 650*1150mm with pull down mesh for desert cooler all as specified in Above item.

Casement Window size - 1100*1700 mm : uPVC window with having two glass panel openable outside with inside pleated mesh(1000 * 1700mm).Rest part in coupling window which is having top portion fixed and bottom openable glass panel window size 500*1300mm all as specified in Above item.

Casement Window size - 900*1700 mm : uPVC window with having two glass panel openable outside with top fix (900*550) inside pull down mesh(900*1150mm) inside all as specified in Above item.

Casement Window size - 1000*550 mm : uPVC window with fixed frame and glass only.

Casement fixed cum top Hung Window size - 500*900 mm : uPVC window with having bottom part fix & top part openable glass sash with pull down mesh size 500*450mm inside all as specified in Above item.

Casement Window size - 900*1200 mm : uPVC window with having two glass panel openable outside with top fix (900*550) inside pull down mesh(900*650mm) inside all as specified in Above item.

Casement Window size - 600*900 mm : uPVC window with having bottom part fix top part openable glass sash with pull down mesh(600*450mm) inside all as specified in Above item.

Fix Window size - 300*850 mm : uPVC window with having one glass panel with member all as specified in Above item.

Casement Window size - 1500*1200 mm : uPVC window with having one glass panel openable outside with inside pull-down mesh(850 * 1200mm).Rest part in coupling window which is having one sided top portion fixed and bottom openable glass panel window size 650*650mm with pull down mesh for desert cooler all as specified in Above item.

Casement Window size - 1200*1200 mm : uPVC window with having one glass panel openable outside with inside pull-down mesh(450 * 1200mm).Rest part in coupling window which is having one sided top portion fixed and bottom openable glass panel window size 650*650mm with pull down mesh for desert cooler all as specified in Above item.

Casement Window size - 450*850 mm : uPVC window with having bottom part fix top part openable glass sash with pull down mesh(450*425mm) inside all as specified in Above item.

Casement Window size - 1000*1700 mm : uPVC window with having two glass panel openable outside with inside pleated mesh(1000 * 1700mm) which is having top portion fixed and bottom openable glass panel window size 500*1300mm for desert cooler all as specified in Above item.

Slider Window size -1200*900 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -2400*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -2400*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel and coupling window with having openable casement sash with top fix size 650*1200 mm with pull down mesh at openable sash size 650*650mm all as specified in Above item.

Slider Window size -2300*1700 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1500*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1800*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -900*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1000*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size -900*900 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size 1200*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size 2300*1200 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size 1000*1700 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

Slider Window size 1200*850 mm : uPVC window with having two glass sash panel with inside one slider wire mesh panel all as specified in Above item.

S&F MS grill powder coated fixed to frame of window/Jambs of window complete all as specified & directed.

S&F in repair 25 mm dia SS drapery rod grade 304 medium weight complete all as specified & directed. Make -Jindal or equivalent

S&F SS -304 grade brackets/ end brackets for holding drapery rod complete all as specified & directed.

S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved complete all as specified & directed.

M&L preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L preparation old untreated steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint over complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over one coat of wall care putty to make smooth the undulated surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over one coat of wall care putty to make smooth the undulated surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint by mechanical means over a coat of primer complete all as specified and directed.

M/L Complete removal of existing treatment of old plastered surfaces of walls and Washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over a coat of primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls & applying two coats of white wash by mechanical means complete all as specified & directed.

M & L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings complete all as specified & directed.

M & L Complete removal of existing treatment of old plastered surfaces of ceiling and Washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by mechanical means complete all as specified & directed.

M&L Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate,as in lintels up to 1.5m clear span, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating, complete all as specified & directed.

Taking down existing water proofing roof treatment of any description complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to on roof surfaces mixed with WPC as per manufacturers instructions complete all as specified & directed. Note : liquid water proofing compund shall be measured and paid seperately.

Supply only liquid water proofing compund complete all as specified & directed.

S&F fiber reinforced UV resistant elastomeric liquid applied waterproofing & heat reflective coating with acrylic polymers and polyester/glass fibers after scraping and properly cleaning the surface to remove loose particles with wire brushes complete or as directed water proofing treatment shall be in three coats over a coat of primer and as per manufacturers instructions complete all as specified and directed.

M & L for PCC tiles of size 300 x 300 x 22 mm with grey cement & no pigment set jointed and pouinted in neat cement slurry in as in roof cut & polished complete all as specified & directed.

Cleaning of concrete surfaces on both side of crumple/expansion joint to remove any dust, oil, greae incl removal of latance and cleaning the inside of expansion joint with compressed air and repairing the edges of joint (in case of weak concrete at the joint edge) and also configuring the joint width in case of expansion joint (with irregular width more than the width of the chosen Sikadur combiflex strip width) with appoxy repair mortar sikadur 31 and sikadur 41 complete all as specified & directed.

M&L epoxy based membrane adhessive sikadur 31 C a@ 1.0 Kg/mtr as base coat having mixed density 1.75Kg/Ltr, bond strength > 1.5 N/mm2 on both side of the joints complete all as specified & directed.

M&L 2 mm thick and 150 mm width flexible FPO based membrane Sikadur- Combiflex SG system chemical based modified flexible Polyolefin (FPO) with advanced adhesion. Fire rating euro class E (ENISO11925-2, Classification to EN 13501-1) Service temperature -30 degree centigrade min to +40 degree centigrade maxin wet condition -30 degree centigrade to +60 degree centigrade max in dry conditiion.and the product should have tensile strength > 40N /mm2 (ISO 34-B), elongation at break > 600% (EN 12311-2) seam strength> 300 N/5 cm (2 mm) (EN 12316-2) >400 N/5 cm (2mm) ( EN12317-2). Behaviour under hydrostatic pressure 6bar/72H no leakage (EN1928-b) and should pass thermal aging:7500 H passed (SIA V280, 1996) complete all as specified & directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L for 10-12 mm thick granite pre polished as in door cills laid over approved chemical adhessive complete all as specified & directed.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified & directed.

M & L 25 mm th Sand filling under floors as cushion to PCC inter locing pavers complete all as specified & directed.

M &L Machine pressed precast concrete interlocking paver block of any shape & size With grey cement and no pigments confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified & directed.

M & L for PCC (1:3:6) type -1 using 20 mm graded stone aggregate as in kerb stone complete all as specified & directed.

M&L 2 coats of synthetic enamel paint over a coat of primer on new conc or plastered surfaces incl preparation of surfaces as on kerb stones complete all as specified & directed.

S & F Plate rack of size 750mmx600mmx250mm fabricated out of 0.6mm th stainless steel sheet fixed in repair complete all as specified and directed.

Dismantling/ chipping of unsound weak loose & cracked concrete/ cover of reinforcement over RCC columns,roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, mild steel wire fabric of weight exc. 4 Kg/ Sqm as reinforcement, tied or tuck welding to existing reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh, applying rust remover, removing rusted steel bars, applying two caots of alkaline rust converting primer SIKA rust off - 100 or equivalent apply bonding agent to old concrete surface and providing PPM to the reqd thickness and finishing the surface with micro concrete SikaREp Microcrete-4 or equivalent having compressive strength more than 60 N/mm2 ( 28 days) to true line incl necessary formwork, shuttering, scaffholding etc reqd at site of work. Note : Steel wire mesh shall be measured & paid seperately

ditto- as item no 165 but using steel reinforcement ditto. Note : Steel reinforcement shall be measured & paid seperately

Dismantling loose/cracked concrete completely as in chajjas, balconies, roof projections upto double storey buildgs including cleaning existing reinforcement, applying rust remover, removing rusted steel bars, apply bonding agent to hold concrete surface and casting chajjas using RCC 1: 1 1/2: 3 type B1 (using 20 mm graded stone aggregate) to outward slope incl necessary formwork, scaffholding etc complete all as specified & directed.

Dismantling/ chipping of unsound weak/ loose & cracked concrete/ cement plaster as in soffits of chajjas, ceillings , roof projections upto double storey buildgs including cleaning existing reinforcement, applying approved rust remover, removing rusted steel bars if necessary , apply Epoxy resin concrete bonding (Sikadur-32LP @ 0.4 Kg/Sqm) coat on prepared RCC surfaces as per manufacturers instructionbonding agent to old concrete/ plaster surface and finishing to required thickness with PMR (polymer modified ready to use cementitious mortar) complete all as specified & directed.

S&F MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as specified & directed.

ditto-as item No 169 but 10 mm dia & over complete all as specified & directed.

Dismantling loose/cracked concrete cover as in RCC facia upward or downward of thickness not exc 100 mm , cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry incl dusting of steel reinforcement, providing mild steel wire fabric of weight exc. 4 Kg/ Sqm as reinforcement tied to existing reinforcement or tuck welding to existing reinforcemrnt and applying PMR (polymer modified ready to use cementitious mortar) to the reqd thickness and finishing the surface to true line incl necessary formwork shuttering, scaffholding etc reqd at site of work complete all as specified & directed.

ditto- as above item no 171 but using steel reinforcement in lieu of wiremesh ditto complete all as specified & directed.

S& F hard drawn steel wire fabric exc. 4 kg/Sqm weight cut tom length bent to shape required and tying with & incl mild steel wire (annealed) not less than 0.9 mm dia as in reinfor cement complete all as specified & directed.

M & L Steel work in tabular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified & directed.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers complete all as specified & directed.

M&L for retrieving vegetation growth/plants from walls roofs, chajja upto double storey height incl taking out deep roots and poring Hcl acid and making good the disturbed surfaces with CM 1:4 incl all means reqd at site complete all as specified & directed.

M&L formwork to soffits of suspended slab such as roof slabs, floor slabs n.exc.200 mm thick complete all as specified & directed.

M&L for RCC 1:1.5:3 Nominal mix (20 mm graded stone aggregate ) as in slabs supported on walls beams & coloumns in floors , roofs, balconies etc complete all as specified & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase-Red,Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches as required for one light point controlled by one switch complete all as specified & directed.

One light/fan/exhaust fan/securiy light controlled by one nos, one way switch complete all as specified & directed..

One three pin 6 Amp socket outlet point on same board complete all as specified & directed..

One three pin 6 Amp socket outlet point on indep board complete all as specified & directed.

One light point controlled by two way switch complete all as specified & directed..

One bell point controlled by one bell push complete all as specified & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase-Red,Neutral-Black) and earth continuity conductor 4 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, socket as required for on 16 Amps socket outlet point controlled by one switch on independent board complete all as specified & directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified & directed.

Supply & fix Switch in replacement of piano,penta one flush type single pole, one way 6 Amp complete all as specified & directed.

Supply & fix in replacement of Switch piano, Penta one flush type single pole, one way 16 Amp complete all as specified & directed.

S & F in replacement of Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified & directed.

S & F in replacement of Socket outlet 2 in 1, 3 pin, 6 amp flush type complete all as specified & directed.

S & F in replacement of Bell push, flush type, 6 amp 240 Volts complete all as specified & directed.

S & F in replacement of flush type, pantaone single pole, Two way 6 Amp switch complete all as specified & directed.

S & F in replacement of angle holder insulated polycarbonate body complete all as specified & directed.

'S & F in replacement of ceiling rose 3 plates polycarbonate body complete all as specified & directed.

'S & F in replacement of hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified & directed.

'S & F in replacement of Bell ding dong type, AC, 240 volts, single pole complete all as specified & directed.

'S&F factory made SP& N 8 Ways sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amps rating copper bus bar, and of the under mentioned type complete all as specified & directed.

M&L Sub main wiring with under mentioned runs of single core PVC insulated but unsheathed FRLS cable of specified size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, drawn-through and including suitable size PVC rigid conduit and fittings / accessories, concealed in wall and also including the specified runs of specified size earth continuity conductor of similar type cable complete all as specified. (The under mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length) complete all as specified & directed.

Two runs of 06 Sq mm size main cable and one run of 6 Sq mm size earth continuity conductor complete all as specified & directed.

Two runs of 04 Sq mm size main cable and one runs of 4 Sq mm size earth continuity conductor complete all as specified & directed.

S & F in replacement of LED (0.6 M)/ 2 ft smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of 5 KA capacity. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 Complete. Cat Part No. HPLT51510CW of HPL Make, Cat Part No. LDL10CDL of Make CG, Cat Part No. LDLSR10-CDL of Make Crompton

S & F in replacement of LED (1.2 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 COMPLETE. Cat Part No.LUMILINERBSWLED830SPCWH of Make Havells, Cat Part No. CCS-100-20-65-HCZ-DP-NWH of Make CG, Cat Part No.HLPT51520CW of Make HPL

S & F in replacement of LED bulb head fitting 9 watt IP 65 & IK 08 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable. Cat Part No.SSK-PAG-N-9WSYSKA of Make Syska, Cat Part No. WDFBZ29 of Make Crompton, Cat Part No.HLPT51520CW of Make HPL

S & F LED 15 watt street light smartbrite PDC housing with IK 07 protection PC glossy diffuser duly prewired connection having a nominal system lumen output of efficiency 100 lumens/watt and total power consumption not more than 15 watt including driver. it has a rated IP 66 with 4 KV inbuilt surge protection, and having 1 meter long 40 mm dia GI pipe bracket with necssary fasteners, nut & bolt for mounting of LED fittings. Cat Part No.ENDURAPFARISL15WLED757SATSTOPC of Make Havells, Cat Part No.BCLST15WLED of Make Bajaj, Cat Part No.HPLEDSL15605 of Make HPL

M & L in replacement of Earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6.3mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth lead GI strip 25 X 4 mm by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 5 of SSR Part-I connected to continuous earth wire on pole all as specified and testing on completion, including provision of earth wire protected by 40mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as specified & directed.

Supply and Hanging/ fixing ceiling fans 1200 mm sweep 50 Hz AC 230 volts, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod canopy set, rubber reel including 0.5 sqmm three core PVC insulated flexible copper conductor mutistranded wire from fan motor to ceiling and writing MES NO on Fan body complete all as specified & directed.

S&F exhaust fans mettalic body 300 mm sweep, 1400 rpm, min airflow 1900 cum / hr suitable for SP 230 / 250V 50 Hz AC supply complete with louvers shutters including 3 nos 1.5 sq mm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan & making necessary hole in wall and make good to finish surface complete all as specified & directed.

Supply and fixing storage water heater of 25 liter capacity BEE star rating 5 in approved colour, heating element 2.0 KW adjustable temperature setting knob for temperature setting between 25 degree to 75 degree centigrade titanium steel tank with titanium enamel coating and titanium heating enamelled element including 15 mm bore 450 mm long flexible PVC pipe connection for cold water supply and 15 mm bore 450 mm long chromium plated metallic flexible pipe connection for hot water supply complete.

S & F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket oulet with and including one number single pole 'B' series MCB 16 amp as required complete all as specified & directed.

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good distrubed surface complete all as specified & directed.

Supply and fixing LED building security light fitting 25 watts, pressure die cast aluminium housing with IP-66 deg of protection. complete with 32 mm dia GI Bracket of GI tubing light grade alongwith clamps, bolts, Nuts etc as per HPL cat part No HPLLEDSL2560S or equivalent.

Taking down old unserviceable indoor type panel of any capacity complete all as specified & directed.

S & F MCBs of 'C' series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified & directed.

S & F MCBs of 'C' series double pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified & directed.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2.0 mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R,Y&B, 200 Amps 415 Volts indoor type wall moulded of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insulalated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R,Y & B and comprising of the following:- Incoming :- One number MCCB 63 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz. Outgoing : (a) Single phase tamper proof meter with with optical port 10 to 60 Amps - 04 Nos. (b) MCB DP 32 Amps "C' series 10 Ka AC 240 volts-04 Nos

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, PCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified & directed.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been erected and tested complete all as specified & directed.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed.

Supply & lay bricks, sub class B, laid dry abutting each other with gap between adjacent slabs not exceeding 10 mm, over UG cable for protection complete all as specified & directed.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified.

M&L cutting holes in stone walls built in cement mortar and making good dismantled portion in CM 1:3 or equivalent cement concrete 1:2:4 type B1 as required superficial area exc 150 Sqcm and not exc 400 Sqcm complete all as specified and directed.

Supply, laying, jointing, testing and commissioning LT underground cable 25 sqmm 4 core, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed.

Taking down & refixing celing nose, fan, exhaust fan, geyser, socket, switch, light fitting any type & size complete all as specified and directed.

Taking down existing industrial box 16 amp of any type & size complete all as specified and directed.

Siya constructions

JASRAJ AND COMPANY

SHREE MEGHALAYA CONSTRUCTION AND SUPPLY COMPANY

Pioneer Enterprises

M/S Janak Raj Gumber