Bridge work

Amount

BRIDGE ESTIMATE

Earth work excavation in all classes of soil except hard rock including Soft Dinintegrated rocks / Weathered rock no requiring blasting and depositing on bank,with all leads and lifts including cost of all labour, equipments and all other incidental charges such as bailing out water, providing and maintaining necessary cofferdams sheeting, shoring, bracing,and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specifation for FOUNDATION OF ABUTMENTS & PIERS as per section 300 of MORT&H Specifications (Fifth Revision) (Including 600mm from the face of foundation for extra working space as per IS: 1200 (Part 1) - 1992 Cl:4.2.5.1)

Compacted plain Cement Concrete M10 (Ordinary concrete), using 40 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including soft water, labour charges for mixing, transporting, laying, compacting, curing concrete tools and plants and incidental charges such as bailing out water, forming and maintaining of protective bunds, cofferdams, shoring, strutting, etc., complete as per relevant standard specification for LEVELLING COURSE OF 100mm THICKNESS BELOW FOOTING UNDER ABUTMENTS AND PIERS as per section 2100 of MORT&H specifications (Fifth Revision).

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at depths, hire charges for tools and plants, including all other incidental charges such as bailing out water, forming and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specification for FOOTING OF PIERS, ABUTMENTS, RETURN WALLS as per section 2100, 1500 & 1700 of MORT&H specifications (Fifth Revision).

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including labour charges for mixing, transporting, laying, curing concrete,working at depths, hire charges for tools and plants including all other incidental charges, etc., complete as per section 1500, 1700 & 2200 of MORT&H specifications (Fifth Revision) for SUB STRUCTURE - ABUTMENTS AND RETURN WALLS (below ground level).

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including labour charges for mixing, transporting, laying, curing concrete,working at height, hire charges for tools and plants including all other incidental charges, etc., complete as per section 1500, 1700 & 2200 of MORT&H specifications (Fifth Revision) for SUB STRUCTURE - ABUTMENTS AND RETURN WALLS (above ground level).

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at depths, hire charges for tools and plants, including all other incidental charges, etc., complete as per sections 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision) for SUB STRUCTURE - PIERS (below ground level).

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at height, hire charges for tools and plants, including all other incidental charges, etc., complete as per sections 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision) for SUB STRUCTURE - PIERS (above ground level).

Providing and fixing Weep holes with CLASS I PVC SEEPAGE PIPES of 100 mm dia. of required lengths for abutments and wing walls including costs and conveyance of all materials to work site and labour charges for fixing , etc., complete to drain the backfill as per section 2706 of MORT&H specifications (Fifth Revision)

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of formwork, labour charges for mixing , transporting, laying, curing concrete, working at heights, soft water, hire charges for Tools and Plants, including all other incidental charges, etc., complete, as per section 1500, 1700 & 2200 of MORT&H specifications (Fifth Revision) for BED BLOCK CUM DIRTWALL AND PEDESTAL OVER ABUTMENTS .

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at depths, hire charges for tools and plants, including all other incidental charges, etc., complete as per sections 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision) for CAPPING BEAM OVER PIERS .

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at depths, hire charges for tools and plants, including all other incidental charges, etc., complete as per sections 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision) for PEDESTALS OVER ABUTMENTS AND PIERS .

Supplying and fixing of ELASTOMERIC BEARING as shown in the drawing including cost and conveyance to work site, labour for fixing the bearing in position and all other incidental charges, etc., complete as per section 2000 of MORT&H specifications (Fifth Revision)

Vibrated reinforced Cement Concreteof Grade M35 (Design mix) using 20 mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel but including cost of form work, labour charges for mixing transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants, including all other incidental charges, etc., complete as per relevant standard spectification for T-BEAMS and CROSS BEAMS as per section 1500, 1700 & 2300 of MORT&H specifications (Fifth Revision)

Vibrated reinforced Cement Concrete of grade M35 (Design mix) using 20mm ISS HBG Graded metal as the max. size of coarse aggregate , including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of formwork, labour charges for mixing , transporting, laying, curing concrete, working at heights, soft water, hire charges for Tools and Plants, including all other incidental charges, etc., complete, as per relevant specification for DECK SLAB, KERB AND SAFETY KERB as per section 1500, 1700 & 2300 of MORT&H specifications (Fifth Revision)

Providing and fixing of G.I. DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanised Iron pipes and flats and fixing them in position, etc.,. complete as per section 2705 of MORT&H specifications (Fifth Revision)

Supplying and installation of STRIP SEAL EXPANSION joint system conforming to spectifications for Road and Bridge Works published by Ministry of Road Transport and Highways in the 40mm wide expansion gap provided in between decks over piers and in between deck and dirt wall over abutment with fatigue tested structural steel section at the nosing and anchorage assembly , including cost and conveyance of all materials , cost of testing as per the MOST specifications, including lablour ,equipment and incidental charges for fixing the joints complete in all respects as per section 2600 of MORT&H specifications (Fifth Revision)

Providing FILTER MEDIA behind Abutment and return walls for 600mm thickness using filter material as per Appendix 6 of IRC: 78-2014 well packed with smaller size towards the soil and bigger size towards the wall including cost and conveyance to worksite including all other incidental charges, etc complete as per Cl. 710.1.4 & Appendix-6 of IRC 78-2014.

FILLING behind Abutments and Return walls filling with clean gritty free draining gravel Phi value more than 35° free from cohesion, as per appendix 6 of IRC 78-2014 including cost and conveyance of material to worksite , laying, handling charges and filling in layers tamping under optimum moisture content to get the maximum density, including watering, with all leads and lifts for water and all other incidental charges, etc., complete as per Cl.710.1.4 & Appendix-6 of IRC: 78-2014 and Cl. 305 of MORT&H specifications (Fifth Revision).

Compacted plain Cement Concrete M15 (Nominal mix) using 40mm ISS metal , including cost and conveyance of all materials to site and cost of cement at site,including all lablour charges for mixing Concrete, laying, hire charges for Tools and plants , compacting, curing with all leads for soft water, including all other incidental charges, form work etc., complete,For BASE COURSE BELOW APPROACH SLAB AND RAMP as per section 1500, 1700 & 2704 of MORT&H specifications (Fifth Revision)

Vibrated reinforced Cement Concrete of grade M35 (Design mix) using 20 mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel but including labour charges for mixing , laying, curing concrete, working at heights, soft water, hire charges for Tools and Plants, including all other incidental charges, etc., complete For APPROACH SLABS as per section 1500, 1700 & 2704 of MORT&H specifications (Fifth Revision)

Vibrated Reinforced Cement Concrete M35 (Design mix) using 20mm ISS HBG graded metal , including cost and conveyance of all materials to site and cost of cement at site but excluding cost of steel and fabrication,including all lablour charges for mixing Concrete, laying, hire charges for Tools and plants , compacting, curing with all leads for soft water, including all other incidental charges, form work etc., complete,For SAFETY KERB RAMP as per section 1500, 1700 & 2704 of MORT&H specifications (Fifth Revision)

Vibrated Cement Concrete M30 (Design mix) using 20mm, 12mm & 6mm ISS HBG graded metal including cost and conveyance of all materials 75mm uniform thick with surface reinforcement conforming to Section 2702.2 of MORT&H Fifth Revision using ISS HBG Graded metal including cost and conveyance of all materials to work site including cost of cement at site, including all labour charges for mixing concrete, laying, hire charges for Tools and plants, compacting, curing with all leads for softwater, including all other incidental charges formwork etc., complete, for WEARING COAT OVER DECK SLABS AND APPROACH SLABS as per Cl. 2702.2 of MORT&H specifications (Fifth Revision)

Vibrated Reinforced Cement Concrete M40 (Design mix), using 20mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel, but including cost of form work, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hirecharge for tools and Plants, including all other incidental charges, etc., complete, for CRASH BARRIER as per section 811, 1700 & 2703.3 of MORT&H specifications (Fifth Revision)

Supply and fabrication of High corrosion Resistant marine steel Fe-500D (HYSD) grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening,cutting,bending,tying grills, including over laping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges , etc., complete as per section 1009.3 & 1600 of MORT&H specifications (Fifth Revision)

Supply and fabrication of Fe-240 (mild steel grade I) steel required in the schedule including cost of steel at site cost of providing and cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills including over lapping to the required length wherever necessary and providing to the reinforcement, placing the reinforcement in position as specified in the drawings including cost of binding wire ,provision of spacer bars, cover blocks and all other incidental charges etc complete as per section 1600 of MORT&H specifications (Fifth Revision)

Earth work excavation in all classes of soil and depositing on bank,with all leads and lifts including cost of all labour, equipments and all other incidental charges etc., complete as per relevant standard specifation for DRESSING THE BED UPTO SILL LEVEL as per section 300 of MORT&H Specifications (Fifth Revision)

Supply and fixing of PVC pipes of 160mm dia.. Including cost and conveyance of pipes to the site and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges etc complete., for proving utility services in safety kerb.

FORMING APPROACH ROAD

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Approach Road for 95% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Approach Road for 97% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Box cutting as per MORTH Rev. V Clause No. 111, 112, 305.

Picking the existing BT surface upto 50mm depth as directed by the departmental officers and collecting the picked up salvaged metal and stacking the same for reuse and deposting the debris excluding cost of materials including all labour charges for picking and all other tools and plants employed of the work and including all other incidental charges etc., complete as per standard specifications as per MORTH Rev. V Clause No. 111, 112, 202,305.4.3 & 501.

Granular Sub-base with Graded Material (Table:- 400-1) - By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 as per MORTH Specification ) - for grading- V Material as per MORTH Rev. V Clause No. 111, 112, 401 & 900.

Providing and Laying Wet Mix Macadam Base Course of 250mm thickness in two layers of 125mm each or else as specified on the prepared sub-base with graded stone aggregate and granular materials of quality size and grading placed in layers as specified including mixing in Base Mix Palnt, spreading in uniform layer in motor grader and compacting with Vibrating Roller of 80 to 100KN static weight and fine dressing for required grade and cross slopes as shown on the drawing, equipement safety measures, testing and incidentals necessary to complete the work as per Technical Specification as per Clause 406 and of MORTH V Revision as directed by Engineer as per MORTH Rev. V Clause No. 111, 112, 406 & 900.

Providing and spraying of PRIME COAT using Bitumen Emulsion SS-1 at the rate of 7Kg per 10Sqm over the WMM surface including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer as per MORTH Rev. V Clause No. 111, 112,502 &900 .

Providing and spraying of TACK COAT using bituminous emulsion RS 1 at the rate of 2.50Kg per 10Sqm over the Prime coat of WMM surface including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer as per MORTH Rev. V Clause No. 111, 112, 503 & 900.

Providing and spraying of TACK COAT using bituminous emulsion RS 1 at the rate of 2.00Kg per 10Sqm over the existing BT surface including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer as per MORTH Rev. V Clause No. 111, 112, 503 & 900.

Bituminous Macadam (Providing and laying of 50mm thick bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder (Viscosity Grade 40), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction, complete as per clause 504) - as per MORTH Rev. V Clause No. 111, 112, 501, 504 & 900.

Bituminous Concrete (Table 500-17) (Providing and laying of 30mm thick bituminous concrete with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (Viscosity Grade-40) at percentage specified by Job Mix Formula of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) - Grading II as per MORTH Rev. V Clause No. 111, 112, 507 & 900.

CONSTRUCTION OF PCC RETAINING WALL- ALL SIDES

Earthwork excavation in all classes of soils except hard rock requring blasting depositing on bank with all leads and lifts as per SS 20B including cost of all labour,materials, tools, equipments and all incidential charges such as bailing out water providing and maintaining necessary conferdams, sheeting, shoring, bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and cleaning the site and disposal of all surplus materials etc complete as per relevant standard specifiation for FOUNDATION OF RETAINING WALL as per MORTH 111, 112, 202, 301 to 305 & 900

Vibrated Cement Concrete M10 grade (Nominal Mix) using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights,hire charges for all tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for LEVELLING COURSE FOR PCC RETAINING WALL as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights,hire charges for all tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for FOOTINGS OF PCC RETAINING WALL as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size HBG metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights, tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for STEM OF PCC RETAINING WALL (below sill level) as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size HBG metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights, tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for STEM OF PCC RETAINING WALL (above sill level) as per MORTH 1000, 1500, 1700 & 2100

Providing and fixing SEEPAGE PIPES of 100mm dia PVC pipes of required length for Retaining Walls including cost and conveyance of all materials to worksite, cost and labour for 900mm dia. Semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing etc., to drain of the Backfill in the Retaining Wall as per MORTH 2700, 2075 & 2706

CONSTRUCTION OF PCC RETAINING WALL - KALANKARAI SIDE

Earthwork excavation in all classes of soils except hard rock requring blasting depositing on bank with all leads and lifts as per SS 20B including cost of all labour,materials, tools, equipments and all incidential charges such as bailing out water providing and maintaining necessary conferdams, sheeting, shoring, bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and cleaning the site and disposal of all surplus materials etc complete as per relevant standard specifiation for FOUNDATION OF RETAINING WALL as per MORTH 111, 112, 202, 301 to 305 & 900

Vibrated Cement Concrete M10 grade (Nominal Mix) using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights,hire charges for all tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for LEVELLING COURSE FOR PCC RETAINING WALL as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights,hire charges for all tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for FOOTINGS OF PCC RETAINING WALL as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size HBG metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights, tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for STEM OF PCC RETAINING WALL (below sill level) as per MORTH 1000, 1500, 1700 & 2100

Vibrated Cement Concrete M20 grade (Nominal Mix) using 40mm ISS size HBG metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights, tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for STEM OF PCC RETAINING WALL (above sill level) as per MORTH 1000, 1500, 1700 & 2100

Providing and fixing SEEPAGE PIPES of 100mm dia PVC pipes of required length for Retaining Walls including cost and conveyance of all materials to worksite, cost and labour for 900mm dia. Semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing etc., to drain of the Backfill in the Retaining Wall as per MORTH 2700, 2075 & 2706

FORMING DIVERSION ROAD

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Diversion Road for 95% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Diversion Road for 97% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Granular Sub-base with Graded Material (Table:- 400-1) - By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 as per MORTH Specification ) - for grading- V Material as per MORTH Rev. V Clause No. 111, 112, 401 & 900.

Providing and Laying Wet Mix Macadam Base Course of 250mm thickness in two layers of 125mm each or else as specified on the prepared sub-base with graded stone aggregate and granular materials of quality size and grading placed in layers as specified including mixing in Base Mix Palnt, spreading in uniform layer in motor grader and compacting with Vibrating Roller of 80 to 100KN static weight and fine dressing for required grade and cross slopes as shown on the drawing, equipement safety measures, testing and incidentals necessary to complete the work as per Technical Specification as per Clause 406 and of MORTH V Revision as directed by Engineer as per MORTH Rev. V Clause No. 111, 112, 406 & 900.

Providing and spraying of PRIME COAT using Bitumen Emulsion SS-1 at the rate of 7Kg per 10Sqm over the WMM surface including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer as per MORTH Rev. V Clause No. 111, 112,502 &900 .

Providing and spraying of TACK COAT using bituminous emulsion RS 1 at the rate of 2.50Kg per 10Sqm over the Prime coat of WMM surface including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer as per MORTH Rev. V Clause No. 111, 112, 503 & 900.

Providing laying and rolling of Close Graded Premix Carpet of compacted 20mm thickness using using 0.0162 cum of 13.20-11.20mm, 0.1404 cum of 11.2-5.6mm, 0.0729 cum of 5.60-2.80mm, 0.0405 cum of 2.80mm and below (Type B) graded HBG metal using 19kg of VG30 bitumen for 10sqm including premixing at CMP, conveyance by tipper lorry, laying by paver finisher and rolling by Vibratory Roller including cost and conveyance of all materials, hire charges of all T&P all labour charges, fuel and and all other incidental charges etc., Complete as per specification using CMP as per clause 508 of MORTH Rev-5

Supply and hoisting of RCC NP3 class pipes of 1000mm dia standard length supplied by the Contractor at his own cost specified below confirming to IS 458 / 2003 cost of pipe as a finished work including all other incidental charges, testing charges, including loading and unloading, transport and delivery in good condition at work site as directed by the departmental officers etc., complete as per MORTH specication Rev. V for forming for Diversion Road

BOX CULVERT AT KM 5/0 OF SIZE 3.00X2.00

Earthwork excavation in all classes of soils depositing on bank, with all leads and lifts as per SS 20B, including cost of all labour, equipments and all other incidental charges such as shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specifation for Foundation for Box culvert and Return Wall as per section 300 of MORTH Specification (Fifth Revision-2013)

Vibrated Cement Concrete of grade M15 Nominal Mix, using 40mm ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications, for BASE COURSE OF BOX CULVERT AND RETURN WALL as per section 1500,1700 & 2704 of MORT&H Specification (Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BOTTOM SLAB OF BOX CULVERT as per section 1500,1700 & 2100 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BODY WALL OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20 mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for TOP SLAB OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and fixing weep holes with class I PVC of 100mm dia. PVC pipes of required lengths for abutments and wngs including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing, etc.,to drain of the backfill IN THE BOX CULVERT as per MORTH 2700, 2075 & 2706

Supply and Fabrication of steel Grade Fe-500 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

Providing FILTER MEDIA behind the Abutments and Wings with clean graded III material to 600mm thick using filter materials as per Appendix - 6 of IRC: 78-2014 and well compacted in layers with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges including hire charges for tools and plants employed etc. for filter media as per MORTH Revision vth Cl.309-3-2-2 and 305-4-4 etc., complete.∙

Vibrated Cement Concrete of grade M20 (Nominal Mix ) using 40 mm ISS size HBG graded Metal including cost and conveyance of all materials to site and including cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, working on height, hire charge for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for PARAPET FOR BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and Fixing of G.I. Drainage Spouts of 100mm dia as per GOI drawing No. SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spouts projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing including cost and conveyance of GI pipe and flats and fixing them in position etc. complete as per standard specification.

Vibrated Cement Concrete of M20 (Nominal Mix ) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for footing of return wall as per section 1500,1700 & 2100 of MORT&H Specification(Rev-V)

Vibrated Cement Concrete of M20 (Nominal Mix) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for Stem of return wall as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Diversion Road for 95% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 5 km for formation of Diversion Road for 97% compacion as per MORTH Rev. V Clause No. 111, 112, 305.

Providing and laying Gravel soling for specified thick with clean good gritty gravel over the well prepared sub grade from the approved quarry including cost and conveyance of material, laying in accordance with the requirements and specification. The materials shall be laid in one or more layers as sub-base according to the line and grade and cross action shown in the drawing or as directed by the Engineers for DIVERSION ROAD

Dismantling the existing PCC structure and salvaging and removal and disposal of resulting trenches etc as per unique code 0034 of PWD SOR 2023 - 24

Vibrated Cement Concrete M30 (design mix) using 20mm 12mm 6mm ISS HBG graded metal as the max. size of coarse aggreagates including cost & conveyance of all materials to site and cost of cement at site, but excluding cost & fabrication of steel, but including cost of form work, soft water, labour charges for mixing, transporting, laying, curing concrete working at heights, hire charges for T&P including all other incidental charges etc., complete as per relevant std specification for WEARING COAT OVER DECK SLAB AND APPROACH SLAB as per section 2702.2 of MORT&H Specifications(Rev-V)

Supply and Fabrication of steel Grade Fe-240 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

BOX CULVERT AT KM 5/4 OF SIZE 3.00X2.00 (TO FIELD)

Earthwork excavation in all classes of soils depositing on bank, with all leads and lifts as per SS 20B, including cost of all labour, equipments and all other incidental charges such as shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specifation for Foundation for Box culvert and Return Wall as per section 300 of MORTH Specification (Fifth Revision-2013)

Vibrated Cement Concrete of grade M15 Nominal Mix, using 40mm ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications, for BASE COURSE OF BOX CULVERT AND RETURN WALL as per section 1500,1700 & 2704 of MORT&H Specification (Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BOTTOM SLAB OF BOX CULVERT as per section 1500,1700 & 2100 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BODY WALL OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20 mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for TOP SLAB OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and fixing weep holes with class I PVC of 100mm dia. PVC pipes of required lengths for abutments and wngs including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing, etc.,to drain of the backfill IN THE BOX CULVERT as per MORTH 2700, 2075 & 2706

Supply and Fabrication of steel Grade Fe-500 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

Providing FILTER MEDIA behind the Abutments and Wings with clean graded III material to 600mm thick using filter materials as per Appendix - 6 of IRC: 78-2014 and well compacted in layers with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges including hire charges for tools and plants employed etc. for filter media as per MORTH Revision vth Cl.309-3-2-2 and 305-4-4 etc., complete.∙

Vibrated Cement Concrete of grade M20 (Nominal Mix ) using 40 mm ISS size HBG graded Metal including cost and conveyance of all materials to site and including cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, working on height, hire charge for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for PARAPET FOR BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and Fixing of G.I. Drainage Spouts of 100mm dia as per GOI drawing No. SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spouts projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing including cost and conveyance of GI pipe and flats and fixing them in position etc. complete as per standard specification.

Vibrated Cement Concrete of M20 (Nominal Mix ) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for footing of return wall as per section 1500,1700 & 2100 of MORT&H Specification(Rev-V)

Vibrated Cement Concrete of M20 (Nominal Mix) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for Stem of return wall as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Vibrated Cement Concrete M30 (design mix) using 20mm 12mm 6mm ISS HBG graded metal as the max. size of coarse aggreagates including cost & conveyance of all materials to site and cost of cement at site, but excluding cost & fabrication of steel, but including cost of form work, soft water, labour charges for mixing, transporting, laying, curing concrete working at heights, hire charges for T&P including all other incidental charges etc., complete as per relevant std specification for WEARING COAT OVER DECK SLAB AND APPROACH SLAB as per section 2702.2 of MORT&H Specifications(Rev-V)

Supply and Fabrication of steel Grade Fe-240 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

BOX CULVERT AT KM 5/4 OF SIZE 3.00X2.00

Earthwork excavation in all classes of soils depositing on bank, with all leads and lifts as per SS 20B, including cost of all labour, equipments and all other incidental charges such as shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specifation for Foundation for Box culvert as per section 300 of MORTH Specification (Fifth Revision-2013)

Vibrated Cement Concrete of grade M15 Nominal Mix, using 40mm ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications, for BASE COURSE OF BOX CULVERT as per section 1500,1700 & 2704 of MORT&H Specification (Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BOTTOM SLAB OF BOX CULVERT as per section 1500,1700 & 2100 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for BODY WALL OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Vibrated Reinforced Cement Concrete of M25 (Design Mix) using 20 mm HBG graded Metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrications of steel at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, hire charges for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for TOP SLAB OF BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and fixing weep holes with class I PVC of 100mm dia. PVC pipes of required lengths for abutments and wngs including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing, etc.,to drain of the backfill IN THE BOX CULVERT as per MORTH 2700, 2075 & 2706

Supply and Fabrication of steel Grade Fe-500 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

Providing FILTER MEDIA behind the Abutments and Wings with clean graded III material to 600mm thick using filter materials as per Appendix - 6 of IRC: 78-2014 and well compacted in layers with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges including hire charges for tools and plants employed etc. for filter media as per MORTH Revision vth Cl.309-3-2-2 and 305-4-4 etc., complete.∙

Vibrated Cement Concrete of grade M20 (Nominal Mix ) using 40 mm ISS size HBG graded Metal including cost and conveyance of all materials to site and including cost of cement at site including cost of formwork, softwater, labour charges for mixing, transporting, laying and curing concrete, working on height, hire charge for all tools and plants and all other incidental charges etc., complete as per relevant standard specifications for PARAPET FOR BOX CULVERT as per section 1500,1700 & 2200 of MORT&H Specification(Rev-V)

Providing and Fixing of G.I. Drainage Spouts of 100mm dia as per GOI drawing No. SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spouts projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing including cost and conveyance of GI pipe and flats and fixing them in position etc. complete as per standard specification.

Dismantling the existing RCC Box culvert and salvaging and removal and disposal of resulting trenches etc as per unique code 0035 of PWD SOR 2023 - 24

Vibrated Cement Concrete M30 (design mix) using 20mm 12mm 6mm ISS HBG graded metal as the max. size of coarse aggreagates including cost & conveyance of all materials to site and cost of cement at site, but excluding cost & fabrication of steel, but including cost of form work, soft water, labour charges for mixing, transporting, laying, curing concrete working at heights, hire charges for T&P including all other incidental charges etc., complete as per relevant std specification for WEARING COAT OVER DECK SLAB AND APPROACH SLAB as per section 2702.2 of MORT&H Specifications(Rev-V)

Supply and Fabrication of steel Grade Fe-240 High corrosive resistent steel at site required for all RCC items of works involved in the schedule including cost of steel at site, cost of fabrication, labour charges for cleaning the bars, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary, hoisting and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. for BOX CULVERT as per section 1009.3 & 1600 of MORT&H Specifications(Rev-V)

DISMANTLING THE EXISTING PIPED CUM VENTED CAUSEWAY

Dismantling the existing RCC Box culvert and salvaging and removal and disposal of resulting trenches etc as per unique code 0035 of PWD SOR 2023 - 24

Dismantling the existing PCC structure and salvaging and removal and disposal of resulting trenches etc as per unique code 0034 of PWD SOR 2023 - 24

PROVISION FOR PAINTING

Supplying and Painting the walls with two coats of emulsion over one coat of Emulsion primer (Black and White colour (Zebra crossing)) as instructed by the Departmental officers including preparation of surface curing etc., complete in all floors complying with standard specifications (The colour and shade of the Emulsion paint shall be got approved by the Divisional Engineer (H) before use of work)

Calculation of SubTotal, GST and Total carried out by system automatically

Sub Total Amount for above all items

GST 18% for the above SubTotal Amount

N. Ravichandran