SPECIAL REPAIR TO OFFICERS MESS LIVING IN ROOM NO 17 AND 18, IMPROVEMENT TO ROOM NO 126

Amount

Dismantling of floor, hearth or wall tiling,Granite platform including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350*450*7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and as directed.

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and as directed.

M&L for Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:4) complete all as specified and as directed.

M&L for Brickwork with sub class 'B' Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:6) complete all as specified and as directed

M&L for Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and as directed.

Taking down of chowkats with shutters (without taking off shutters from the frame) n.exe 1.5 sqm each all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exe 1 sqm all as specified and as directed.

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

M&L for Rendering 15mm thick on other than fair finish of bricks/concrete/stone surface of wall in CM (1:6) and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thick in CM (1:4) in brick surfaces mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thck in CM 1:3 as in RCC works including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10 mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement. complete all as specified and as directed.

M&L for Rendering 10mm thick in CM (1:4) in brick surfaces mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for integral water proofing compound ISI Marked complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connections complete all as specified and as directed.

Material and labour for 18 mm to 20mm thick granite (of any type)over and including screed bed 15 MM,CM (1:4} work table and polished in steps jamps pillars window cills cooking platforms and like in cement motar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and as directed

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 20 mm including cutting of Ston, Concrete Block or Slab walls and making good complete as specified and as directed

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm with sink coupling wastepipe etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with ancor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, as shown on drawing on page No 150 of SSR Part-II 2004 including taking down the old PVC door frame complete all as specified and as directed.

S&F 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges complete all as specified and as directed.

S&F butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified complete all as specified and as directed.

S&F Extruded Aluminium bow handles of size100 mm complete all as specified complete all as specified and as directed.

S&F Extruded Aluminium bow handles of size150 mm complete all as specified complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and as directed

S&F Aluminium alloy, anodised,sliding door bolt 250 mm with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F mild steel pressed handles, 150 mm oval type, stove enameled black all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in manhole cover slab complete all as specified and as directed.

S&F IInd class HW plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints & fixing to wall with ancor bolt or screw with nemani wall plug (size 15 cm long ) complete all as specified and as directed.

S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 2nd class hardwood glazed and skeleton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into Squre edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and as directed.

S&F Vitreous china urinals, bowl type of size 465x355x265mm fixed with Urinal spreader, including brackets complete all as specified and as directed.

S&F Harrison curtain rails, 19/20mm dia, anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one complete all as specified and as directed.

S&F steel windows or ventilators, fixed type or side/cetre hung type with glazing bars including taking down old one complete all as specified and as directed.

Hacking out old broken glass (any thikness ,size, quality or descripation) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed

S/F figured glass, pin head type and 3.0 mmthick glazing with oil putty in squares n exc 0.5 sq. in each pane complete all as specified and as directed.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one complete all as specified and as directed.

S&F Aluminium Framed doors with shutters glazed including necessary joining cleats,03 nos Aluminium Hinges(100mm) in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and directed.

S&F Aluminium Louvered type ventilator weighing 0.55 kg/mtr with 4 mm thick frosted glass with all fittings closing and opening type aluminium sections of approved make confirming to IS.(Glazing shall be measured and paid seperately) complete all as specified and as directed.

S&F Aluminium Framed windows with sliding shutters glazed including necessary joining cleats,in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and as directed.

S&F Aluminium Framed Windows with Aluminium Grill(As per Manufactures instruction and Thickness as per IS) and shutters glazed with 5 mm thick tinted glass with one side visibility using powder coated aluminium sections of approved make confirming to IS complete all as specified and as directed. (aluminium member shall not be less than 1.5mm thickness). Glazing shall be measured and paid separately)

Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing complete all as specified and as directed.

M&L for Prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with Aluminium frame work as in door/fixed frame work complete all as specified and as directed.

S&F 18/19 mm Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination for Cupboard door,side/middle/top/bottom/shelf of cuboard complete all as specified and as directed.

S&F for second class hard-wood plain fillets of sectional area exc 13 & n exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured in brick wall/Rcc with suitable nails/screws/nut & bolt complete all as specified and as directed.

M&L For teak wood beading 18 to 20mm wide and 4mm thick including polishing for beading of prelaminated particle board complete all as specified and as directed.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and as directed.

S&F 125 mm size Aluminium handles, cast type, polished bright complete all as specified and as directed.

S&F Catch Spring magnet type for Cup Board complete all as specified and as directed.

S&F Aluminium Knobs 35-40mm diacomplete all as specified and directed by Engr-in-charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed by Engr-in-Charge.

S&F in repair 2 levers Brass Mortice lock for Aluminium Door, size 150 mm all as specified and directed.

M & L for Preparation of old plastered ceiling surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

M & L Preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 3mm thick wall care putty where required, complete all as specified and directed.

M & L Preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

M & L Preparation of Newly plastered wall surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty over a coat of cement primer complete all as specified and directed.

M & L Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer and complete all as specified and directed.

M & L Preparation of Newly plastered ceiling surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty over a coat of cement primer complete all as specified and directed.

M & L Preparation of New wooden Surfaces of any description n exc 10cm width or girth when unconnectedwith other painting or when painted in different tint complete all as specified and directed.

M&L for Preperation of old painted surfaces, one coat of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F vitreous chain squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVc ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

S&F Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

S&F Health Faucet with hook and 1.5 mtr tube full brass 15 mm.Make -JAINKO.Cat.No-HFJ-2

S&F 2 in One Bib Cock, Chromium plated, 15mm, Make-Jaguar or equvilent.

S&F Bib Cock, Chromium plated, 15mm, Make-Jaguar or equvilent.

S&F 2 in One Angle Valve, Chromium plated, 15mm, Make-Jaguar or equvilent.

S&F Angle Valve, Chromium plated, 15mm, Make-Jaguar or equvilent.

S&F Soap dish holder (CP Brass) MAKE- Make-Jaguar or equvilent.

S&F Towel Rod.Make- Make-Jaguar or equvilent.

S&F Toilet Roll Holder with Flap.Make- Make-Jaguar or equvilent.

S&F SDG frameless looking mirror for bathrooms, silver colour ,size 18 x 36 inch,5 mm thickness,bevelled edge at 0.75 inch,make:Saint Gobain/Modi Guard ultra Mirror.

S&F in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed Make :Prayag/ Parryware/Haindware

S&F PVC, 32 mm dia,polythelene of low density of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

S&F in repair Pillar tap brass CP fency type 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed. Make : Prayag / Jaquar

S/F in repairs PVC mirror cabinet of size 350 x 450 mm, Make PRAYAG or equivalent in other makes all as specified and as directed.

S&F in repairs CP bottle trap, 32 mm dia fancy type as approved by engr-in-charge, Complete of Make - Jaguar or equivalent in M/s Parry ware/M/s Johnson including taking down the unserviceable one all as specified and directed.

S&F Glazed Corner shelf with brass CP railling of Make Paryware or equivalent in Jaquar/Jhonson/Parryware/Prayag all as specified and as directed.

S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed

S&F 2 levers Brass Mortice lock for Aluminium Door, size 100 mm all as specified and as directed.

S&F Stainless steel wire cloth, PVC 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in Aluminium windows,doors with proper accessories all as specified and as directed.

Demolition of cement concrete (reinforced) any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M/L for type B o 1:2:4 (12.5mm graded aggregate) R C C for chajjas complete all as specified and as directed.

M/L for formwork to chullah hoods, chajjas,troughs and similar items in cluding edges complete all as specified and as directed.

Formwork to edges of concrete slabs n.exc 20 cm wide with rough finished flat surface of concrete complete all as specified and as directed.

S/F PVC(SWR) pipes 110mm bore single socketed in any length withrubber ring joints fixed to walls all as specified and directed by Engr-in-Charge.

S/F PVC(SWR) bend 110mm bore any radius all as specified and directed by Engr-in-Charge.

M&L mild steel TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed by engineer-in-charge.

All as per item above here-in-before but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

Cutting chases for roof sheet fixing to walls and making good with fill the pcc in groove cuts after fixing the sheet, cutting not exc 10 cm girth all as specified and as directed. (Note- pcc shall be measured and paid separately)

S&F sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

M&L PCC, (1:2:4) Type B-1(20mm graded stone aggregate) 25 mm thick as in floor all as specified and directed.

Stainless steel grating,150 mm dia, with waste hole, of PTMT (minimum weight 40 gms), fixed in repairs, all as specified and directed.

M&L for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Dismantling water tanks 500ltrS to 1000 ltrs complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore all as specified and directed.

M&L for PVC (SWR) nahani trap with grating,125/110 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal all as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

S&F Pillar cock Chromium plated, 15mm, Make-Jaguar or equivalent complete all as specified.

M & L preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid Dr. Fixit Pidicrete URP in two coats as per manufacture instruction mix with cement complete all as specified and as directed.

M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and as directed.

S & F in repair 15 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair 20mm bore ball brass valve high pressure ,with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking down carefully existing bitumen tar felt including plaster and roughening the surface ,wire brushing, cleaning and washing with water etc, and removing the rubbish to a distance exceeding 500m but n.exc 1Km and depositing where directed complete all as specified and as directed.

Ditto all as per item no. 2.00 above but on vertical surfaces like parapet except brick coba/tilling etc complete all as specified and as directed.

M&L for water proofing treatment of sunken portion of toilet,cement mix with mastercrete-M-81 of CHOKSEY CHEMICALS (or equvalent product of other company) in the ratio of 2:1,two part of cement and one part of mastercrete-M-81 and applied in two coats @ 0.75 kg /sqm per coat all as specified and directed by Engr-in Charge.

M&L for 50mm thick plain Cement concrete (1:2:4) type -B1 using 20mm graded aggregate, as in sunken floor, fair finish with using extra cement complete all as specified and directed.

S&F Stainless steel PVC wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

Dismantling of wall and celling board (fiber, pulp, Gypsum insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.

M&L for Providing 12.5 mm tapered edge Gypboard (confirming to IS-2095-1982)Manufactured by Indian Gypsum false ceiling using GI Perimeter channel of size 20mm (one flenge) x27 mm web x 30mm (other flange x27mm (web)x30mm(other flange) x0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channel (of size of 15mmx45mmx15mm x 0.9mm thick)er @1220 mm center to center with ceiling angle (of size 25mmx10mmx0.55mm thick)fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55 mm thick having knurled web of 51.1 mm and two flanges of 26mm each with lips of 10.5mm)using connecting clip in direction perpendicular to intermediate channel @300mm center to center and gypboard fixed to celing section using 25 mm drywell screws @ 230mm centre complete all as per manufactures instructions and as directed including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false celing complete all as specified and directed.

S&F Toughened glass 12 mm thick, for door of approved colour design and logo(if required any type)slide opening or sliding type with complete fittings of make DORMA or equivalent as equivalent as approved including pivot hinge /floor spring handle, complete locking arrangements with duplicate key etc & connecting job like tile cutting demolition pcc platering,painting etc.confirming to IS all as specified and directed.

M&L for providing aluminium composite panels including all necessary frame work and consist of following,3 mm thick thermoplastic core of any toxic LDPE sanwitched between 2 sinks of 0.5 mm alumininium sheet making a total panel thickness of 4 mm width outer surface finished with PVDF based coating 30 micron inner surface finished with a thin coat of polister paint .(2) Aluminium framing of section 38mmx50mmx1.50mm thick.(3)Aluminium grid shall not be exceed 1.0sqm each the aluminium grid shall be fixed with clamp 4 x6mm not more than 1mc/c.colour shall be approved by GE complete all as specified and directed.

S&F Stainless Steel Letters in Hindi or English as directed at site of 250 mm size all asa specified and directed.

M&L for 30 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate for flooring complete all as specified and as directed.

Reinforced Concrete Cement M-25 Nominal mix (20mm graded stone aggregate) as in beam,lintel band over 1.50m span complete all as specified and directed.

Formwork to sides and soffits of floor or beam , lintels , cantilevers , shelves including supports , overhangs etc. also splays between floors and beams etc complete all as specified and directed.

E/M Portion

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.

M & L for sub main wiring (concealed) complete with two single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Polycab, Finolex,Havells Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

M & L for sub main wiring (concealed) complete with two single core 4 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Polycab, Finolex,Havells Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

All as per serial item No 3 here-in-after but 20 mm dia rigid non-metallic PVC conduit heavy grade with two runs of 2.5 Sqmm and earth continiuty conductor of size 2.5 Sqmm all as specefied and directed.Make of cable : Polycab, Finolex,Havells Note : 3 run of 2.5 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

M & L for point wiring (concealed) on walls and surface on ceiling complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan/Ex Fan point controlled by one switch

(c) One switch socket outlet modular type 3 pin 6 amp on same board.

(d) One bell/ buzzer point controlled by one push switch.

All as per item No 6 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 6 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board. Note for Item No. 1 to 9 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

S & F calling bell musical type , AC, single pole one way 230 volts. Make : Legrand, Anchor Roma, Crabtree.

S & F bell push switch, modular type, 6 Amps, 1 module, 250 volts all as specified and as directed . Make : legrand Cat No. 675504

S & F of 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from 3600 total lumen.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection 2KV ,ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz ,The system efficacy must be between80-100 lumen /watt ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make : Crompton Greeves/Bajaj/Phillips/ Wipro.

S & F LED security light fitting 25 Wmade out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Taking out the existing any type fittings from ceilings and S & F 18 Watt LED round recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat part No. LSCRM-18W-CDL/NW, wipro, Bajaj.

S & F master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 18W (including driver). Make : CG Cat part No. LT8-20-865-2, Phillips/WIPRO/Bajaj

S & F after replacement U/S master led tube 4ft 20 W LED Tube polycarbonate type. nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 18W (including driver). Make : Phillips/CG/WIPRO

S & F decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : CG Cat part No. DMLN1LT8-16,Phillips/WIPRO/Bajaj

S & F after replacement U/S decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : Phillips/CG/WIPRO

S & F Surface mounting LED Luminaries and 1 x 9 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG Cat part No. LCTL-9-CDL, Phillips, Wipro/Bajaj

S & F after replacement U/S Surface mounting LED Luminaries and 1 x 9 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG, Phillips, Wipro

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531

S & F Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501

S & F socket modular type 6 Amps 3 pin 2 module 250 volts all as specified and as directed. Make : Legrand Cat No. 675551

S & F socket modular type single pole one way 6/10/13 Amps multistandard 250 volts all as specified and as directed. Make : Legrand Cat No. 675554

S & F ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.Make : Leader, Anchor

S & F socket modular type 6/16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555

S & F switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531

S & F power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611, ABB,Seimens

S & F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 ,ABB,Seimens

S & F MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand or equivalent in ABB,Seimens

S/F Wall mounted fan of size 16" plastic body including all acessories and connected material complete all as specefied and directed. Make : HAVELLS, CG, Usha, Bajaj

Supply and fix new 1 phase AC ststic kilowatt hour meter (Kwh) 1 phase 2 wire, 240 volts lb : 5 A lmax :30 A, class 1.0, Frequency 50 Hz of L & T Model EM 101 Class 1 anti tamper feature with bicarbonate box suitable for fixing of meter complete all as specified and directed Make :- L & T Cat Part No. WM101BC5DL0BOX

dhanshree enterprises

Asha Enterprises

M/s Earth Technology and Construction

M/s Prakash Agencies

Meet Road Lines

M/s ABHIMAN HEGDE

Rajveer Infrastucture

Vishwakarma Engineering Works