Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹11.4 LAdmitted-Finance WZ 66 SRI NAGAR RANI BAGH NORTH WEST DELHI DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | -46.09% | ₹11.4 L | L1 | Admitted-Finance |
| 2 | L2₹13.5 LAdmitted-Finance | -36.00% | ₹13.5 L | L2 | Admitted-Finance |
| 3 | L3₹14.0 LAdmitted-Finance 2ND FLOOR 208 D BLOCK AJNARA COMPLEX VIVEK VIHAR DELHI 110095 | SHAHDARA | DELHI | 110095 | -33.70% | ₹14.0 L | L3 | Admitted-Finance |
| 4 | L4₹14.2 LAdmitted-Finance | -32.88% | ₹14.2 L | L4 | Admitted-Finance |
Tender Value
₹21.2 L
EMD Value
₹42,306
Closing Date
10 Feb 2026, 3:00 pmClosed
EE(E)/ELD-13/DDA
Executive Engineer (E), ELD-13/DDA, Near Hasanpur Bus Depot. Delhi.110092
SITC of Ornamental lights and poles, Uplighter, Bollard etc. in Archeological Park Mehrauli (Jamali Kamali) under HD-4/DDA
2026_DDA_896610_1
51/EE/ELD-13/DDA/2025-26
Open Tender
Electrical Works
60 days
As per NIT documents.
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹42,306
12 Feb 2026
2 Feb 2026
11 Feb 2026
2 Feb 2026
10 Feb 2026
2 Feb 2026
Fabrication, supplying and installation of Min. 4 mtr high decorative pole made out of GI tube 'B' class confirming to IS:1239 duly welded with MS base plate of 250mmx250mmx10mm as per indicative drawing of pole attached having different profile with cast aluminium Embellishment with inbuilt connection box .Bottom profile 1000mmx114mmx4.0 mm and top profile 3000mmx76mmx3.2mm. Service window/connection box with four way connector and 1 no. 6/32 amp 10 KA 'C' Series SPMCB i/c mounting arrangement for loop-in & loop out . Pole is primer coated , PU painted and suitable for LED Post top fixture etc all complete as per the direction of Engineer-in-charge.
Supplying and fixing of Cone LED bollard Aluminium die cast Housing 1 mtr height with diffuser at the upper section having IP≥ 65 protection ,CCT-3000 K alongwith minimum 8 watt LED and driver for operation on 220-240v 50 HZ single phase AC supply making plate for bolting on suitable size CC foundation, connection, testing etc complete as reqd.
Supplying , installation , testing and commissioning of LED ground burial uplighter 9 watt made out of die cast Aluminum housing with toughened glass IK≥07, IP≥65 & CCT-3000 K i/c connection etc . As reqd.
Casting of suitable foundation for pole of overall size 400mm x 400mm x 1200mm deep (both above & below ground level) having concrete mix 1 : 2 : 4,(1 cement; 2 course sand; 4 graded stone aggregate) including supply and fixing of one set comprizing of 4 nos of 16mm dia 600mm long J type foundation bolts(threaded portion shall be galvanized) along with 3 nos GI nuts and 2 nos GI washer per bolt, 2 nos DWC pipe of 32/40mm dia of suitable length shall be embeded in above foundation for drawing of incoming & out going cable. The Tor steel used in pedstal shall be 12mm dia - 8nos. vertical 1350mm long with 10mm dia ring @150CC - 9 Nos 1600mm long as binder complete with digging shuttering and back filling etc as reqd. Tor steel shall be ISI marked.
Supplying and Installation with testing and commissioning of 60 watt Circular LED post top offering excellent uniform illumination made up of pressure die cast Aluminium body and opal PC cover , IP:66 & IK≥ 07, 3000K as per approved by Engineer-In-Charge.
Supply, installation, testing and commissioning of 9-10 watt LED Bush/spike light with die cast aluminium housing with toughened glass IP:66, IK>=07 in ground/surface/MS conduit etc. as per the directions of Engineer-in-charge.
Supplying, replacement/fixing and testing of waterproof maximum 7 Watt/mtr LED based flexible strip light (warm white of 3000K)IP>=65 with LED driver , male/female connector on existing wall surface for outdoor decoration i/c connection etc. as reqd.
Supplying of following size of XLPE insulated and PVC sheathed Armoured Aluminum condutor LT cable of 1.1 KV grade i/c testing etc as required
2c x 16sq mm.
4cx25 sq.mm
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 1) 63 mm Dia (OD-63mm & ID 51 mm nominal)
Laying of 1 No PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/Hume/Stoneware/Metal Pipe as reqd. (a) Upto 35 sq.mm
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing trench for loop as reqd. a) upto35sq.mm
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with the existing surface/ recessed conduit/ submain wiring/cable etc as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm dia.
Supplying and drawing of following size FR PVC insulated PVC sheathed copper conductor multi core cable in the existing pole etc as required.
3c x 1.5 sqmm
3c x 2.5 sqmm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the exisiting surface/ recessed steel/ PVC conduit as required. 1) 1x1.5 sq.mm
Fabrication, Supplying and Installation of wire mesh protection cover guard made out of 8 SWG (nominal) MS wiremesh of size (25 mm x 80 mm nominal) following size with MS angle iron base frame made out of 40mm x 40mm x 6mm and 1.0 Mtr long leg of same angle iron with front doors made out of angle iron of size 40mmx40mmx6mm and MS strip for support of size 40mm x 6mm as per drawing including providing , supplying and fixing of godowan lock including locking arrangement, duly welded the parts , painting and grouted in ground with 1: 2: 4 (1 cement; 2 coarse sand; 4 graded stone aggregate) Cement concrete foundation etc as per direction & approved by Engineer in-charge.
1.5 mtrx1.0 mtrx1.5 mtr (height)
Supplying and laying 25mmx5mm GI strip at 0.50 mtr below ground as strip earth electrode, including connection/ terminating with GI nut, bolt, spring washer etc as required (Jointing shall be done by overlapping and with 2 sets of GI nuts bolt and spring washer spaced at 50mm).
Providing and fixing 25mmx5mm GI strip on surface or in recess for connections etc as required.
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.
1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.19 MB
Tendernotice_2.pdf
PDF • 3.25 MB
BOQ_942446.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid