Andaman Nicobar

Active

Works

Civil Works - Buildings

Replacement of roofing sheet and other allied works of Panel Room at Dolphin Resort, Swaraj Dweep

Andaman and Nicobar Islands Integrated Development Corporation Limited (ANIIDCO)

Dolphin Reosrt, Swaraj Dweep | South Andamans, Andaman And Nicobar Islands

Amount: ₹3.9 LCloses: 12 Oct 20265d left

Timeline

Published28 Sept 2026
Submission Opens5 Oct 2026
Closes12 Oct 2026
Bid Opening13 Oct 2026

Tender Value

₹3.9 L

EMD Value

₹7,851

Closing Date

12 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

General Manager (CW)

Address

General Manager (CW) Vikas Bhawan, ANIIDCO

Work Description

Replacement of roofing sheet and other allied works of Panel Room at Dolphin Resort, Swaraj Dweep

Tender Information

Tender ID

2026_ANCVL_24919_1

Reference Number

ANIIDCO/CW/26-27/TD-20

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

30 days

Location

Dolphin Reosrt, Swaraj Dweep

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender documents

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScan copy of DD or FDR or Bk chq or BG any Com.Bk as EMD of Rs. 7,851/- in favour of GM, ANIIDCO (.pdf)

RequiredScan copy of Work Experience Certificate or New Enlistment or start up certificate (.pdf)

RequiredScan copy of Affidavit as per clause 1.2 to be executed in non judicial bond paper (.pdf)

RequiredScan copy of PAN Card (.pdf)

RequiredScan copy of Certificate of Registration of GST (.pdf)

RequiredCertified copy of the site inspection as page 37/C (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹7,851

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

13 Oct 2026

Download Starts

29 Sept 2026

Download Ends

12 Oct 2026

Submission Starts

5 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1.1	Electric resistance or induction butt welded tubes	192.5	kg	194.4	₹37,422
2Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
2.1	Ridges plain (500- 600mm)	30	metre	532.35	₹15,970.5
3Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like difusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
3.1	GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 grns/sqrn (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coeficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.	23.5	sqm	2,068.75	₹48,615.63
4Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
4.1	Old work (one or more coats)	73	sqm	62.7	₹4,577.1
5Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
5.1	One or more coats on old work	32	sqm	102.8	₹3,289.6

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.43 MB

Work Item Documents

TenderdocPanel.pdf

Tender Documents • 0.67 MB

BOQ_26368.xls

BOQ • 0.36 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1.1	Electric resistance or induction butt welded tubes	192.5	kg	194.4	₹37,422
2Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
2.1	Ridges plain (500- 600mm)	30	metre	532.35	₹15,970.5
3Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like difusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
3.1	GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 grns/sqrn (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coeficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.	23.5	sqm	2,068.75	₹48,615.63
4Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
4.1	Old work (one or more coats)	73	sqm	62.7	₹4,577.1
5Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
5.1	One or more coats on old work	32	sqm	102.8	₹3,289.6

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

1.1

Electric resistance or induction butt welded tubes

192.5

194.4

₹37,422

2Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

2.1

Ridges plain (500- 600mm)

metre

532.35

₹15,970.5

3Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like difusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

3.1

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 grns/sqrn (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coeficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

23.5

sqm

2,068.75

₹48,615.63

4Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

4.1

Old work (one or more coats)

sqm

62.7

₹4,577.1

5Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

5.1

One or more coats on old work

sqm

102.8

₹3,289.6