WBPWD/AE-KRESD/NIQ-43/2025-26

Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / Gloster /KEI / Havells /Mescab as approved by E.I.C]

i) 2 core 10 sq.mm.

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI Pipe/Open masonary trench for single, 2, 3, 3½ & 4 core. [F-1 /3(a)]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. [F-2/1(a)]

Supplying and fixing compression type gland and finishing the ends of following XLPE / PVC armoured AL. cable (2/4 / 3.5)Core as per GS. [F-4 & F-5]

i) 2 Core 10 Sq. mm [[7(a)/F4 & 8(b-iii) /F5]]

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required.

32 mm dia [F-6/11(b)]

Supply and Delivery of 7 Mtr. Long GI swaged type tubular Pole of length section [4M(Bott.)+1.5M(Mid)+1.5M(Top)] andoutside Diameter and Thickness of section [114.3X3.65mm(Bott.),88.9 X 3.25mm(Mid), 76.1X3.25 (Top)] , Weight not less than 62 Kg.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Upto 9.0 mtr. Size 0.6x0.6x1.70 mts [H-1/1(a)]

Supply and Fixing of double arm header assembly fabricated from 40mm dia. GI Pipe (ISI-M) of 1.5 Mtr. long rigidly welded with 100mm dia. GI Pipe (ISI-M) of 0.3 Mtr. long at an angle of 110⁰ & suitable angle between the two arms including S/F 3Nos ½” MS jam nut each with 1No. ½” dia. through bolt and painting the entire assembly.

Supplying & Fixing PVC Syntex waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 3 A MCB, one 3 Ph DMC Connector,one NL on porcelain insulator, one compression type brass cable gland for up to 2- core 16 sq.mm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC Rigid conduit 'FR' (Precision make) incl. necy. fittings as required [E-14/1(a)]

a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ E-14,a(i)]

Supply & Delivery of 120 Watt LED Street Light fittings having luminous efficacy- 120lm/W with die cast aluminium housing, heat resistant toughened glass cover & IP66 Protection, Driver rating should be higher than the fittings rating and complete with all accessories (Make: Crompton /Phillips / Wipro or manufacturers with own NABL acreedited Lab having valid Test certificate as approved by E.I.C]

Supply & Delivery of Watt 250 Watt LED Flood Light fittings having luminous efficacy- 120lm/W with die cast aluminium housing, heat resistant toughened glass cover & IP66 Protection, Driver rating should be higher than the fittings rating and complete with all accessories (Make: Crompton /Phillips / Wipro or manufacturers with own NABL acreedited Lab having valid Test certificate as approved by E.I.C]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. [C-3/20(a)]

Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary

(a) Without Loop Box [I-1/13a]

Excavation of soil for installation of Earth Electrode and filling & ramming. (a) For Soft Soil [G-1/1(a)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe. [G-1/2(a)]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)].

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

No. 8 SWG. [G-2/5a(iii)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode. [G-2/3(b)]

Add. G.S.T.@ 18% on total value.

Add. LWC.@ 1% on total value

Please Enable Macros to View BoQ information