Renovation of ICU/HDU in Civil Hospital at Jind in Jind Distt.

Amount

Dismantling cement conglemerate/terrazzo- floors 25mm to 50mm thick including concrete base. (HSR 8.25)

Scraping white wash and colour wash. (HSR 8.32-a)

Scraping of cement plaster (HSR 8.32-c)

Providing and fixing of false ceiling with grooves with 12mm to 15mm thick, 600mm x 600mm best quality mineral fibre tiles of approved make fixed on M.S. Steel runners frame i/c cost of screws angles, cleats, rawel plugs, with taping and painting, etc. complete in all respects as approved by the Engineer-In-charge. HSR 13.93)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge. [HSR 14.92(b)]. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

12 mm Thick Cement Plaster 1:4 on the rough side of single or half brick wall. (HSR 15.5).

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shad including rubbing down old paint.(HSR 16.7)

Painting two coats with platic emulsion paint on walls on new work to give an even shade. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.30)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Providing and fixing precoated aluminium partition including 8mm glass and board. (N.S.) 13 gauge

Anil Kumar

Aman Kumar

ADEPT INFRA SOLUTIONS

M/S SHARNYA ENTERPRISES

Sushil Kumar

Pardeep Kumar

The Sant Nagar Co-op L&C Society Ltd. Distt. Jind