Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹41.7 L+₹65,113 (1.59%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹41.8 L+₹76,714 (1.87%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹42.1 L+₹1.1 L (2.57%)Rejected-Finance NO 422 CHURCH STREET NEW THIPPASANDRA BANGALORE 560075 | BANGALORE | BANGALORE | KARNATAKA | 560075 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹46.4 L+₹5.3 L (12.9%)Rejected-Finance NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
18 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL BANGALORE
ASC AND COLLEGE AGARM POST BANGALORE 560007
ADDITION ATLETARION TO OFFICES MD ACCN AT NGV KORAMANGALA UNDER GE CENTRAL BANGALORE
2023_MES_575515_1
8260E
Open Tender
Civil Works - Others
Item Rate
180 days
GE CENTRAL BANGALORE
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE CENTRAL BANGALORE
₹86,000
Yes
17 Apr 2023
17 Jan 2023
20 Feb 2023
17 Jan 2023
18 Feb 2023
6 Feb 2023
17 Jan 2023 - 28 Jan 2023
Amount
B&R Works : Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.
Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside NGV Premises complete all as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.
All as per item 4 here-in-above but exceeding 1.5 Sqm but not exceeding 7.5 Sqm each -do-
M&L for PCC 1:5:10 type E2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed
Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification with out any extra cost complete all as directed.
Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved.
M & L for plain fillets of 2 nd class hard wood not exc 13 Sqcm in section square, rectangular or triangular in section, cleanswan secured with nails complete all as directed.
S&F solid PVC door frame of size 50X47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & Drg shown in SSR 2020 Pt II complete all as directed.
S&F factory made solid PVC profiled panel door shutter 28 to 30 mm thick with integral skin as frame ( stiles),with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face & of approved colour as infill, with 'C' type GI or 40x20x19 of MS pipe as stiffner in frame as per specification & drawing.
S&F 18-20 mm thick ply wood , MDF Board medium density with both side melamine in shutters / partitions / drawers / cabinets / racks etc including necessary 4 mm thick teak wood lipping allround complete all as directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames, sliding guide channels for shutter for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed.
S&F powder coated anodised aluminium window and ventilator shutter, side hung type without sash or sliding type, aluminium sections weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long(2 no) suitable handle (1 no) complete all as specified.
S&F stainless steel wire cloth 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, fixed in repairs, complete all as specified
S&F aluminiunm wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple, complete all as specified
S & F 200 mm long aluminium, anodised ,handles (ISI marked) of extruded section and fixed.
S & F 200 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.
S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified & as directed
S&F 100 mm size stainless steel handles (ISI Marked) fabricated type anodised and fixed.
S&F 2 lever lock , drawer grade I size 50 mm with duplicate keys complete all directed.
S&F aluminium channel 'E' type best quality for sliding glass of thickness 6 mm as in show case / cabniets complete all directed.
S&F stainless steeel rollers of size 65 mm for sliding of glass of thickness 6 mm complete all as directed.
M& L for Ball catches with 8 mm dia steel ball , and brass body and striking plate including letting in and fixed complete all as directed.
M&L for rendering 10 mm thick in CM 1:6 on brick work/stone work or concrete surface finished the surface even and smooth without using extra cement complete all as specified.
All as per item No 26 here-in-above but 10 mm thick in CM 1:3 on ceiling,chajja,roof projection etc.
M&L for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick work/ stone work or concrete surfaces mixed with WPC as per manufacturer instruction, and finished the surface fair and even complete all as specified and directed. (Note : WPC shall be measured and paid separately).
M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. & brushing with neat cement slurry @ 3Kg /Sqm complete all as directed.
M & L for applying aevenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm for sunken floors of any description complete all as directed.
M&L for 25 mm avg thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in levelling course to floors etc complete all as directed.
M & L non-skid coloured joint ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.10 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all directed and specified.
M&L glazed ceramic designer tiles any shade or pattern as approved of size 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 32 & 33 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).
M&L 25m thick granite slab (Jet Black) work (table rubbed and polished) in cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L for cutting and grinding of the existing marble / granite / kota stone work / mosaic flooring, skirting, dado, etc by mechanical process using Carborundum stone of appropriate grit, cleaning, making good joints with white cement slurry mixed with pigment to match the shade of the slab and finally mirror polishing by applying wax polish complete all as specified in SSR and as directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.
S&F 4mm thick figured glass, pin headed type, ordinary quality and glazing with oil putty in square / louvers not exceeding 0.5 Sqm in each pane/ louvers complete all as directed.
S&F 5.5mm thick sheet glass, ordinary quality cut to size & fixed in showcases / cabinets / wardrobes etc complete all as directed.
M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1 to 2 mm thick white cement based wall care putty complete all as specified.
M&L preparing new plastered ceiling surface and applying two coats of oil bound distemper over a coat of 1 to 2mm thick white cement base wall care putty complete all as specified.
M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 to 2 mm thick white cement based wall care putty complete all as specified.
M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of 1 to 2 mm thick white cement based wall care putty complete all as specified.
One coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.
All as per item No 43 hereinbefore but on old painted steel surface
Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed.
S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No 8312 or equvelent of Make Hindware/Parryware/CERA
S&F in repair chromium plated bib tap sink cock regular spout with flange complete all as specified and directed.( Make Prayag ( Laguna) Cat No 9316 or equivalent)
S&F in repairs two way bib taps with health faucet (ABS Body) mild steel chromium plated suitable for 15 mm bore of pipe with 1.25 m brass flexible tube of length as ordered and wall hook mounted type chromium plated for EWC Make :Cera / Prayag or equivalent as approved.
S&F in repairs 15 mm bore stop valve/ anngle cost fancy type, cast copper alloy, chromium plated, with long shank and cup (concealed type) screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified. .
S&F in repairs brass CP wall mixer for mixing hot & cold water screwed down for 15 mm bore iron pipe & fixed all as directed. Make : Prayag Cat No 685 or equivalent as approved.
S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.
S&F in repairs brass chromium plated shower rose with arms 100 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed. Make :- CERA Cat No F5007103 or equivalent of Make Hindware/Parryware/Prayag
S & F in repair PVC Waste pipe of size 32/40mm dia for WHB/Sink
S & f in repairs toilet paper holder with flat recessed type stainless steel complete all as specified.
S & F in repairs stainless steel Soap dish fixed in positon as ordered complete all as directed.
S&F in repairs sheet glass shelf assemble consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and ralling 60 cm long complete all as directed.
S&F corner glass shelf assembly 300 mm (with ABS brackets) fixed complete all as directed. Make : Prayag Cat No BEA - 46 or equivalent as approved.
S&F in repair stainless steel plate rack of size 600x910x254 mm with standard section etc fixed complete in position as complete all as directed .
S&F in repair PVC Bathroom Mirror cabinet of size 430mm x 330mm with 5mm thick high quality mirror, seamless finish, light weight, high strength, fixed on wall with cadmium plated brass screws, complete all as specified & as directed. Make :- Prayag (Cat Part No. 551) or equivalent in makes as approved by GE.
S&F 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed to wall, ceilings or in floors etc. complete as directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in floors in repairs complete all as directed.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in floors in repairs complete all as directed.
S&F in repair 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.
S&F in repair 75 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.
S&F in repair Vitreous China Wash hand basin with pedastal , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, center hole basin mixer CP fancy type , 32 mm waste coupling brass chromium plated suitable for wash basins , PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge.
S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag
Taking down any type & size of damaged sink & S&F new sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mor-tar to dwarf wall or including fix-ing cantilever brackets and con-necting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed.
E&M Works : Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as directed..
Taking down old un servceable DB's / Main switches any capacity complete all as directed.
Taking down old un servceable MCB's, SP/SPN / TPN complete all as directed.
M&L for point wiring for one light/ ceilig fan/Exhaust fan /bell point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non-metallic rigid PVC concealed conduit (medium duty, ISI marked, not less than 20mm dia) with all fittings such as tee, bends, etc all as per IS, terminated in & including new sunk type pressed steel terminal boxes concealed in wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete all as specified and as directed. Note : Cost of cutting/leaving forming chases for conduits, sinking for boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item.
All as per item No. 73 above but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches -do-
All as per item No. 73 above but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch socket on independent board -do-
All as per item No.73 above but for one light point controlled by two, two way switches single pole -do- .
All as per serial item No. 73 here-in-above but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour
S&F Modular switch 1 way 6 Amps,1 module 240 Volts AC complete all as directed.
S&F Modular switch 2 way 6 Amps,1 module 240 Volts AC complete all as directed.
S&F Modular type socket combination , 16 Amps 240 volts AC , 2 module , suitable for inserting 3 pin 6 Amps / 3 pin 16 Amps plug top all as specified and direced .
S&F Modular type socket combination , 6 Amps 240 volts AC , 2 module , suitable for inserting 2 pin 6 Amps / 3 pin 6 Amps plug top all as specified and direced .
S&F Modular type 1-way Bell push switch , 1 module 6Amps 240 Volts AC complete all as directed.
S&F electric calling Bell Ding Dong AC 230 Volts, single pole / Multi Music type
S&F Stepped type electronic modular fan regulator 2-module , modular type 120W ,2 Module 230 Volts AC .
S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals 240 Volts AC , ISI marked, including supply and fix PVC square mounting block complete all as specified and directe
S & F exhaust fan, single phase, heavy duty, 300 mm (12") sweep, 1 plastic ventilation type body 1400 RPM including fixing of mounting frame in the round hole cutting in the wall, by means of rugged bolts, nuts and washers etc,including connecting with three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan, complete all as specified and directed including taking down unservicable exhaust fan & depositing the same to MES E/M Store yard . Make :Crompton Greaves / Havells /Usha/Orient .
Supply and fix LED tube light fitting, 1x10 watts,6000k 230 volt, with extruded aluminium housing provided efficiant heat disspation with poly corbonate diffuser, all pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. Make : Havell's / Philips / CG/ Wipro/Bajaj.
Supply and fix LED tube light fitting, 1x20 watts,6000k 230 volt, with extruded aluminium housing provided efficient heat disspation with poly corbonate diffuser, all pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. Make : Havell's / Philips / CG/ Wipro/Bajaj.
Taking down any type and size of Geysers fixed in any description after necessary water connection & Supply & Fix new Electric water heater 5 Star rating glass line Inner tank plastic outer body PUF insulation of 25 litre storage capacity operating on single phase 230V , AC Supply along with hot & cooled high pressure pipes heavy duty branded PVC connection pipe of size 600 mm long & pair of 15 mm dia heavy duty PVC connections minimum 450 mm long suitable for both inlet & outlet hot water fixed with brass adopter / union washer both sides fixed as per manufacturers instructions , making necessary connections & testing on completion complete all as directed. (Note :(i) The old geysers & its accessories shall be deposited to E/M Store yard with out any extra cost to Govt. (ii) Quoted rate is deemed to be inclusive of, 600 mm long PVC connection pipe & Pair of PVC connections).
S&F sheet metal enclosures for DB's horizontal type double door in wall / nitch for housing MCB's to be used Single pole and neutral, 12way double door ,415 Volt with 200 Amps rated Bus bar complete all as specified and directed.
S&F MCB SPN 'B' series 32 AMP 240/415 V , 50 HZ, 10KA repturing capacity complete all as directed.
S&F MCB SP 'B' series 240 V , 50 HZ, 10K repturing capacity , suitable for lightning and other domestic load Rating 6-32 A complete all as directed.
Taking down old any type of submain wiring along with condiuit & couint accessories & provide new submain wiring with 2 runs of 4 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit of size as ordered in walls / ceilings etc complete all as specified and directed. (Note :- 2 runs 4 Sqmm cable , one run 4 Sqmm cable and one run of PVC Conduit shall be measured as one unit length) .
All as per item No 93 here-in-above but 2 runs with 6 Sqmm single core cable and 6 Sqmm single core as earth contunity wire . (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmm cable and one run of PVC Conduit shall be measured as one unit length) .
M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding & reassembling complete all as directed
Taking down ceiling/exhaust fan dismantling,preparing the surface & painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire including wring existing MES Fan No on painted surface in Black paint , replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refixing in same making necessary connection& testing on completion complete all as directed. Note : The repair work of subject work is to be carried out in Offr's Md Accn in NGV Kormangala area , the tenderers to note that the working hours is limited i.e no work shall be permitted to execute between 1300 hrs to 1500 hrs , no working after 1700 hrs , no working on Sundays & National holidays further the work is to be executed upto a height of seventh floor as such all safety precatuions such as safety belt , scaffoldings as per relevant IS and as as directed by Engineer-in-charge shall be made available to working people by the contractor , the quoted rate is deemed to be inclusive of above no extra shall be entertained at later date. Please note that with out proper safety equipments labourers will not be permitted to work.
SP ENTERPRISES
Chandana Enterprises
Siddivinayaka Constructions
PRAGATHI BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .