GE 874/EWS-52/2020-21

Amount

B/R and E/M Portion

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed

RCC 1:2:4, Type B1 using 20mm graded crushed stone aggregate as in beams and lintels complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, bressumers, lintels, antilevers, shelves including supports, overhangs etc with rough finished surface complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Walling of random rubble stone masonry, well bonded, uncoarsed, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

All as per item No 9 but except stone all as specified and direced.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed.

Demolition of brick work /stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in cement mortar 1:4, complete all as specified and directed.

Brickworks with Sub Class 'B' bricks straight or curved on Plan half brick wall built in Cement mortar 1:4 complete all as specified and directed.

Mild steel works as in clamps, hold fasts and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified & directed.

Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, binding with and including MS annealed wire of dia not less than 0.90 mm complete all as specified and as directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strrups and binders with and including MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor etc. complete all as specified and directed.

50mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement.

Plain cement concrete 1:2:4, Type-B0 (using 12.5 mm graded stone aggregate ) 40mm thick as in floor, finished even and smooth without using extra cement.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4, finished fair to received the tile, complete all as specified and directed.

Non skid coloured ceramic tiles 8mm thick square or rectangular, area of each tile exc. 0.06Sqm but n. exc. 0.11Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed in Cement mortar 1:6 and 25mm PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) complete all as specified and directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, including15mm thick screed bed in cement mortar 1:4, set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

2nd hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Plain framed paneled shutters of 2nd class soft wood (kail) 35mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed.

Glazed and Skelton shutters 30mm thick, open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc supplied and fixed to chowkhat, for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (a) complete all as specified and directed.

Glazed and Skelton shutters 30mm thick, open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc supplied and fixed to chowkhat, for window and ventilator as specified in SSR Part-I, Section-8, clause 8.24 (b) complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face and 2mm prelam PVC Sheet on back face complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

250mm long Mild steel sliding door Plate type stove enamelled black, with bright bolt not less than 12mm dia of 250mm long complete all as specified.

Mild steel pressed handle 100mm, oval type stove enamelled, black.

Mild steel pressed handle 125mm, oval type stove enamelled, black.

Mild steel tower bolt stove enmelled black 150mm long black with bright bolt and fixed

Mild steel tower bolt stove enmelled black 100mm long black with bright bolt and fixed

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 75mm size, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

4mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

4mm thick Figured glass Pin head type and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling plane or currugated steel sheeting any gauge/thickness including Nainital or similar pattern roof covering, all as specified.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

All as per item No. 48 above but except sheeting complete all as specified and direced.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.

6mm thick Plywood, 5 Nos of Ply grade CWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and as directed.

6mm thick Plywood, 5 Nos of Ply grade CWR, type BB, fixed with nails to timber frame work as in walls and lining complete all as specified and as directed.

Fixing only 6mm thick Plywood, 5 Nos of Ply grade CWR, type BB, fixed with nails to timber frame work as in walls and lining complete all as specified and as directed.

20mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

Fixing only 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

25mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in floors etc complete all as specified and directed.

Fixing only 25mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in floors etc complete all as specified and directed.

2nd class soft wood weather boarding clean sawn, plain, 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified.

Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified.

2nd class soft wood as in scantling, clean sawn fixed in position with nails in unframed work, complete all as specified and directed.

2nd class soft wood as in scantling, clean sawn fixed in position with nails in timber framed and fixed (except timber), complete all as specified.

Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads 3sqcm & not exceeding 6sqcm, second class soft wood (Kail) complete, all as specified.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity fixed in repair complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed.

Ball brass valves high pressure with Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe Fixed in repair complete all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe, fixed in repair complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Fixing only old steel water tubing of 15mm bore with new fittings and connections in new or old position (walls, ceiling floor etc.) complete all specified and directed.

Bib tap with wall flange cast copper alloy with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repair complete all as specified and directed.

Bib tap with wall flange cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Bib Tap, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, Fixed in repair complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet complete all as specified and directed.

Vitreous china bowl urinal Fixed in repair of size 465X355X265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement with bracket, flush pipe waste pipe grating and union for discharge pipe complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) size 655mm x 365mm x 745mm, snow white colour, including ‘P’ trap and soft close seat cover, complete all as specified and directed.

Vitreous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rests complete (excluding flushing cistern ) including bed, pipe for flush connection to trap and to flush pipe and mking good to floor with provn of concrete bedding, Fixed in repair, complete all as specified and directed.

Vitreous china wash hand basin 550 x 450mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, Fixed in repair, complete all as specified and as directed.

PVC connection 15mm dia and 450mm long with PTMT nuts and washer, fixed in repair complete all as specified.

110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor complete all as specified.

75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor complete all as specified.

PVC (SWR) bends, 75mm bore, complete all as specified and as directed.

PVC (SWR) bends, 110mm bore, complete all as specified and as directed.

PVC (SWR) junction (single T) equal or unequal, 110mm bore, complete all as specified and as directed.

PVC (SWR) reducer 110mm x 75mm, complete all as specified and as directed.

PVC (SWR) Vent Cowl 75mm, complete all as specified and as directed.

PVC (SWR) Gully Trap 125mm/110mm, setting and jointing with solvent cement complete all as specified and as directed.

PVC (SWR) P Trap 110mm, setting and jointing with solvent cement Fixed in repair complete all as specified and as directed.

PVC (SWR) Floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified & directed.

Plain cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.

Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

Septic tank for 10 users, Brick construction with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CESZ-TD-01/2015 Sheet No.1/3 & 2/3 dt 22 Feb 2015 (revised dt 21.03.2015 ).

Construction of soakage well, excavation, in any type of soil, foundation in PCC 1:3:6 type C1, as in footing, wall of honey combed/ solid mansonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 m dia x 3m effective depth, all as specified and shown in Drg No. CESZ/TD- 01/2015 sh 3/3 dated 22/2/15 & revised on 06/06/15.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old painted surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Applying three coats of white washing including preparation of newly plastered surface of wall complete all as specified.

Applying two coats of colour wash over a coat of white washing including preparation of newly plastered surface of wall complete all as specified.

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 105 here-in-before but for one 5 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 105 here-in-before but for one 5 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 105 here-in-before but for one 5 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

LED Batten 1x20 W for regal batten for LED Universal batten for G13 T with 18W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Eng-in-chrg. Make : Havells batten Cat part No LHFYBYG21N1W020 and LED Tube Road Cat part No LHLDCLXNUL818 or equivalent.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch Socket combination 2 in 1, 5 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

Switch Socket combination 2 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

Socket outlet 2 in 1, 5 pin, 5A, flush type universal, all as specified and as directed.Make:Havells/Anchor

1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire, one twin core cable flat or circular of size 10Sqmm, complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.

MCB 'C' series, single pole 240 volts 6 to 32 Amps all as specified and as directed by Engr -in-Charge. Make: Havells/Legrand/MDS.

Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP- 43 IK -09 protection Single door complete with approprite six bus bar of 200 Amp and neutral link, make legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and makeing good distributed wall surfaces to match with existing specification.

Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 08 way with IP- 43 IK -09 protection double door complete with approprite six bus bar of 200 Amp and neutral link, conforming to Cat Pt No 607711 of legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing spec.

Submain wiring with two single core 2.5 Sqmm PVC FR insulated and unsheathed 1100 volts grade stranded copper conductor ISI Marked drawn into & including medium grade PVC conduit /casing capping, with wooden/white color casing capping (as specified and directed) 25 mm dia with all fittings and accessories and continuous run of one single core PVC FR insulated unsheathed flexible copper conductor cable green colour of size 1.5 Sqmm as earth lead in & including PVC casing and capping/ conduit (not less than 25 mm outer dia) with all fittings and accessories fixed concealed/surface including taking down old unserviceable sub main wiring and making good surfaces to match with existing specification all as required at site complete all as specified and directed by Engr-in- charge. Make of cable - Havells/Plaza/Policab and Make of Casing capping - Polyplast/Pressfit/Presto plast

MCB 'C' series, single pole and neutral 240 volts 40 Amps all as specified and as directed by Engr -in-Charge. Make: Havells /Legrand/MDS.

MCB 'C' series, single pole and neutral 240 volts 6 to 32 Amps all as specified and as directed by Engr -in-Charge. Make: Havells /Legrand/MDS.

M/S SHAMAS PARWAIZ BHAT

MOHAMMAD HAMZA SOFI AND SONS

M/S BEE AAY CONSTRUCTIONS

M/s Sajad Hussain Wani

GH MOHD SHAH AND CO

patriotic builders

Bidder Name

patriotic builders

MOHAMMAD HAMZA SOFI AND SONS

GH MOHD SHAH AND CO

M/S MANZOORAHMAD LONE

M/s Sajad Hussain Wani

M/S SHAMAS PARWAIZ BHAT

M/S BEE AAY CONSTRUCTIONS