Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.6 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹32.4 L+₹77,112.62 (2.44%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹42.3 L+₹10.7 L (33.7%)Rejected-Finance BASTI GOVINDPURA SIMBAL MORH MAKHANPUR GOJRAN JAMMU J K 181101 | JAMMU | JAMMU AND KASHMIR | 181101 | L-3 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
COMPREHENSIVE REPAIR TO BATHROOM, KITCHEN AND TOILET AND CERTAIN MISC WORK ETC IN ZONE A AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_598949_1
GEJC-19/2023-24
Open Tender
Civil Works
Item Rate
210 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
31 Jul 2023
27 May 2023
24 Jun 2023
27 May 2023
22 Jun 2023
10 Jun 2023
Amount
Material and labour for providing and fixing in position suspended false ceiling system using 'E' grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non priemered classic / designer variant E-Board ISI marked IS No 14862-2000. Designer Fibre cement 'E' Board to be placed in the grid of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips including dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling) complete all as specified and as directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres/Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors / terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres / Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.
Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.
Supply and applying two coats of undiluted thick coat of acrylic reinforcement liquid applied elastometric water proofing membrane with ultra violet resistant properties and solar reflective properties over one coat of primer (3:1 water dilution) before applying second coat insert smart care roof tape corner / joints and allow it to dry then apply further coat complete all as specified and directed. Note: - Every coat time gap should be minimum 6 hours.
Supply only liquid water proofing compound complete all as specified and as directed.
Material and labour for cement concrete (1:2:4) type B-I (using 12.5mm graded crushed stone aggregate) as in roof kerbs and coping, rounded or chamfered on edges complete all as specified and as directed.
Dismantling unframed work timber scantling 40 Sqcm and over in section in any position, as in unframed work complete all as specified and as directed.
Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and as directed.
Demolition of brickwork / stone masonary built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles complete all as specified and as directed.
Material and labour for brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete and fixed all as specified and as directed.
Suppy and fixing structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or mild steel tube pipe) including distance pieces, cleats etc Fe-410W (Grade 'E'-250) quality 'A' including shop coat of primer complete all as specified and as directed.
Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.
Supply and fixing in repair prepainted galvalume aluminium zinc coated galvanised iron based corrugated steel sheeting 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws including ridges including dismantling of existing sheets (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and as directed.
Supply and fixing in repair prepainted galvalume aluminum zinc coating galvanised iron based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing sheets (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and as directed.
Material and labour for Asbestos cement sheeting 6mm thick, corrugated or semicorrugated sheets in roofs, wall etc. fixed with L-type or J-type or cranked hook bolts including dismantling of existing sheets (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and as directed.
Material and labour for Asbestos cement two piece adjustable plain ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts including dismantling of existing sheets (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces over newly plastered surfaces finished fair and even without using extra cement from brick or stone walls etc complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces over newly plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished fair and even without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement and including taking down cement plaster from brick or stone walls etc, including racking out joints, hacking for key complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for preparing newly plastered surfaces and applying two coats of cement based paint over and including one coat of primer complete all as specified and as directed.
Material and labour for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty over one coat of primer complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of steel over 10cm width or girth including rubbing down by sand paper and applying two coats of synthetic enamel paint over and including one shop coat of red oxide, zinc chorme of steel surface over 10cm width or girth complete all as specified and as directed.
Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per Square metre, top layer 15mm cement plaster (1:1 / 2:2) (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down old stone grit plaster complete all as specified and as directed.
Material and labour for cleaning of water storage tank 500 litres completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified.
Material and labour for cleaning of water storage tank 1000 litres completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified.
Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.
Description all as per Ser item No. 32.00 here-in-before but figured glass, pin head type complete all as specified and as directed.
Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.
Demolition of lean / cinder concrete filled in sunken slab, wire brushing the surface, cleaning all loose dirt by dusting/watering sunken portion of water closet, toilet etc and applying cement slurry @1.5 Kg per Sqm complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.
Material and labour for any coloured non skid jointless ceramic tiles 6 to 7 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge complete all as specified and as directed.
Description all as per Ser item No 38.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in cement mortar (1:4) complete all as specified and as directed.
Material and labour for non skid tiles coloured exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor, set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge complete all as specified and as directed.
Material and labour for coloured glazed ceramic tiles glossy finish of size 450 x 300 x 5-6mm thick in dado’s / skirting etc (1st quality) set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge including 10 mm thick cement mortar (1:4) complete all as specified and as directed.
Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) and taking down old complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC complete all as specified and directed.
Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.
Material and labour for providing water proofing treatment to sunken floors all as given below: - (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in cement mortar (1:4) mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) PCC (1:5:10) type E-2 in sunken area.
Supply and fixing GI tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing GI tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing in repairs bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed including cutting walls and making good surfaces. Note: - Including making good of surface as existing including tiling, color wash, distempering, plastering etc.
Supply and fixing in repairs chromium plated pillar taps, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450 x 600mm complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 40mm bore complete all as specified and as directed.
Supply and fixing in repairs PVC valveless syphon action type low level flushing cistern 8 - 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed.
Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.
Supply and fixing in repairs chromium plated shower rose with arm and not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.
Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and as directed.
Supply and fixing in repair 125 mm dia steel grating with or without hole complete all as specified and as directed.
Supply and fixing in repairs bip tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 32mm ISI marked complete all as specified and as directed.
Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 40mm ISI marked complete all as specified and as directed.
Supply and fixing in repairs PVC seat cover for EWC, white colour including chromium plated hinges complete all as specified and as directed at site.
Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and as directed.
Supply and fixing in repairs PVC overhead tank cover / Lid of size suitable for capacity of above 500 litres and upto 1000 litres capacity complete all as specified and directed.
Supply and fixing in repair of aluminum (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 1 mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, countersunk oval type of size 550 x 400 mm excluding tap but including fixing to RCC slab and chromium plated waste coupling complete all as specified and as directed.
Supply and laying Vitreous china urinals, flat back size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, brackets and chromium plated waste coupling complete all as specified and directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and directed.
Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and directed.
Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and directed.
Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S A TO Z ENGINEERS
J P TECHNO
Bidder Name
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/S A TO Z ENGINEERS
J P TECHNO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .