SPL REPAIR TO BLDG NO T-3 OF CERTAIN UNIT AND WATER PIPE LINES OF NEW AMN DUMP AT AGE B/R II AND AGE E/M UNDER GE BABINA CANTT

Amount

Dismantling timber scantling , framed /un framed work of 40 sq. cm and over in section in any position complete all as specified and as directed.

S&F rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.complete all as specified and as directed.

S and F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc complete all as specified and as directed.

S&F mild steel ( Plain) plate , square cut or notched (ordinary and counter sunk) forming holes of suitable dia etc complete all as specified and as directed.

M&L providing reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in beam, cantilevers, lintels etc complete all as specified and as directed.

M&L TMT bars 8 mm dia cut to length, bent to shape required incl cranking, bending spirally for hopping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending spirally for hopping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.

M&L brick work with sub class 'B' straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.

M&L renderig 15mm thick in cement mortar 1:6 over faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing of new surface and applying two coat of weather proof paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.

M & L for preparing of new surface and applying two coat of oil emulsion distemper over a coat of alkali resistant priming paint on internal surface complete all as specified and as directed.

M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of weather proof paint on external walls complete all as specified and as directed.

M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.

M&L for a coat of JK/Birla wall care putty 1mm thick including preparation of surface complete all as specified and as directed.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M and L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.

M & L for Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 thick Rendering cement mortar 1:6 complete all as specified and as directed.

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

S&F of anodised snap grid frame work for false ceiling all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complete all as specified and as directed.

M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

S&F 75mm bore CI floor trap etc complete all as specified and as directed.

M&L for Virified Ceramic tiles in any colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and as directed.

M&L for Virified Ceramic tiles in any colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in vertical surfaces such as skirtings/dados or risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed.

-do- but exc 1.5 Sqm and n exc 4 sqm each.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

Cutting holes in brick walls in cement mortar for walls inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and as directed.

M&L for PCC (1:2:4) Type B1 (using 20mm graded aggregate) in wall, boundary pillars and post or similar work for hold fast in door and windows etc all as directed and specified. .

Supply and fix for 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F factory made fabricated 35 mm thick IInd class skeleton shutters two panel open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F powder coated aluminium sliding windows (three track frame of weight not less than 1.17 Kg/Rm) with one fly proof shutters and two glazed shutter having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. Note: (i) All rate i.e track frame, shutter, glazing cleat, rubber gasketetc is deemed included in quoted rates. (ii) Wiremess & glass pane will be measured & paid seperately with respective items.

S & F Powder coating aluminium window and ventilator shutters with frame of weight not less than 1.17 Kg/Rm with sash bar half portion openable for ventilator purpose including fixing of wiremesh outside with fastening arrangement, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading screws etc. complete all as specified and as directed.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed.

S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed.

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.

S & F 25mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.

S&F in repair 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.

S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed.

S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.

S & F pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F towel rail 450mm long of PTMT fixed with an dincluding cromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms) complete all as specified and as directed.

S&F Soap dish any type , fixed to plugs with chromium plated brass screwes complete all as specified and as directed.

Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in wall and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed.

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth and getting out for laying of pipe lines in any type of soil complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm each in soil complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for for sand cushioning of LT UG cable including spreading, levelling, well ramming in layers not exceeding 1.5 mtr in depth complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in foundations/foot path etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above gound level including removal of debris complete all as specified and directed.

M&L for taking up or down steel water tubing and connections of 15 mm dia including cleaning for refixing complete all as specified and directed

Discription all as item No 85 here in before but of size 20 mm bore.

Discription all as item No 85 here in before but of size 25 mm bore.

Discription all as item No 85 here in before but of size 40 mm bore.

Discription all as item No 85 here in before but of size 50 mm bore.

Discription all as item No 85 here in before but of size 80 mm bore.

Discription all as item No 85 here in before but of size 100 mm bore.

Re-laying / re-fixing galvanised mild steel water tubing of 15 mm bore with and including all fittings laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed.

Discription all as per item No 92 here in before but of size 20 mm bore

Discription all as per item No 92 here in before but of size 25 mm bore

Discription all as per item No 92 here in before but of size 40 mm bore

Discription all as per Item No 92 here in before but of size 50 mm bore

Discription all as per item No 92 here In before but of size 80 mm bore

Discription all as per item No 92 here In before but of size 100 mm bore

S & F galvanised steel water tubing medium grade 15 mm bore with all fittings such as bends, elbow, socket etc lad under floors/trenches or on walls with all fixing arrangments including leakage testing as per is 97684 complete all as specified and directed.

Discription all as per item No 99 here In before but of size 20 mm bore

Discription all as per item No 99 here In before but of size 25 mm bore

Discription all as per item No 99 here In before but of size 40 mm bore

Discription all as per item No 99 here In before but of size 50 mm bore

Discription all as per item No 99 here In before but of size 80 mm bore

Discription all as per item No 99 here In before but of size 100 mm bore

S & F in replacement of brass ball valves of size 15 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe incl dismantling old U/s gate valve all as specified and directed

Discription as per item No 106 here in before but 20 mm bore

Discription as per item No 106 here in before but 25 mm bore

Discription as per item No 106 here in before but 40 mm bore

Discription as per item No 106 here in before but 50 mm bore

S&F in replacement of 20 mm Ball valves (float valve) PTMT ,high pressure , with polythene float and fly-nut complete screwed for iron pipe suction pipe, including nut bolt & washers for joints and jointing material complete all as specified and as directed by Engineer in Charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 of size 250mm x 150mm x 40mm omplete all as specified and as directed.

Supply, fixing and testing ALL-IN-ONE Solar street light with high efficiency mono crystalline solar PV module, Lithium Ferro phosphate battery with inbuilt BMS technology, high efficacy LED of 12 watts, MPPT solar charge controller & aluminium extruded body, with progressive intelligent dimming, backup for 02 days including mounting pole 5.0 m long, 50 mm dia med grade Gl pipe with MS clamp and nut bolts and PCC complete all as specified and directed by Engineer-in-Charge

Supply, laying, testing & commissioning of XLPE insulated, armoured heavy duty electnc cable with aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 4 core laid in trenches/pipes/along wall/roof/across drain/culvert complete all as specified and directed

M&L for earthing complete Including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) With top edge of the earth plate not less than 1.5 mtr below normal ground level connected to eavarused earth stnp 32x6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown on electncal plate No.5 of MES SSR Part-I connected to main switch board or main control board all as specrfied and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia light grade ppe and watering pipe shall be 20 mm bore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. Note : (i)The conctrete pit shall be PCC 1:3:6 type Cl, 40 mm thick pre-cast cover slab of RCC (1:2:4) type B-l using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @10 cm C/C on both Sides with suitable cast iron handle shall be provided in liew of cast iron cover shown in electrical plate No 5 of MES SSR Par-I. (ii) Item includes the cost of 7.5 m Gl pipe for protectio of earth strip. (iii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends , elbows etc. shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length earth strip.

Supply and fix LED Single aviation Light with red polycarbonate diffuser for better illumination with integral driver & be cast aluminium housing, (P-40/65 on the Top of RCC Over Head water Tank including 25 RM copper stranded 2.5 Sqmm PVC 3 Core flexible cable with all fixing arrangement.

S&F MCB SP 6 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning complete all as specified and as directed

S&F LED post top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and RUBY (CLEAR)-lP-65 protection of 40 watt, 6000K, 240 volt, 50Hz complete all as specified as directed.

Supply and fixing mount sturdy LED Bollard 1.0 mtr height with excellent light out put through its PMMA widow ensuring maximum illumination aspect in surrounding garden light 10 Watt, inbuilt driver, IP 65, 230 Volt, cornplete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of cast iron sluice valve of 150 mm bore class PN-I .6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost.

S & F in replacement of cast iron sluice valve of 100 mm bore class PN-I .6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost.

S&F in replacement of 100 mm bore air release valve double chamber as per IS 14845 including mounting Gl pipe and clamps as per requirement at site suitable for cast iron pipe/ ductile iron pipe incl all fittings washer nuts 6 bolt etc complete all as specified and directed.

Construction of Valve Pit of Size 1050mm x1050mmx900mm (internal dimensions), Stone masonry constructton,tncludlng all necessary excavation and earth work in hard/ dense soil,returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4..8) Type DQ (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type BO using 12.5m crushed graded aggregate, brick masonry in cement mortar (1:4) rendering, 12 mm thick in cement mortar (1.4) Internalty,ftntshed even and fair and pointing flush externally as the work proceeds in the same mortar, Mild steel angle Iron 50x50x6mm frame,MS sheet cover 3.15mm thick with handle and locking arrangment ,painting ,all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE/AGE over a coats of red oxide pnmer and painting all the MS embedded in PCC with two coats of black bituminous paint etc, Complete all as specified and shown on drawing.

Matenal & Labour for cleaning of RCC underground sump of any type and prevent Algae Growth by dewatering extsbng water complete by manually with bucket or by using pump set etc. including cleaning the internal walls floor with wire brushes & other approved material without damaging the existing surface of wall including cleaning the mouth of washout pipe & taking out the complete sludge & depositing at a distance not exceeding 50 mtr from the site of work & cleaning the complete UG sump surface of walls with fresh water after taking out the complete sludge with entire satisfaction of EIC. in different zone and painted outside on the Tank with Word "Date of cleaning and Tank Capacity" of the following cap.

Cleaning the surrounding area of Pump House by cutting removing of grass, shrubs, bushes around and removing from the campus complete all as specified and directed. Note :- The particular job to be operated through out the contract period to maintain the cleanliness of the surrounding are of the installation by removing the shrubs/bushes and grass to the entire satisfaction of the Engr-in-Charge and the periodicity of this item shall be decided by Engr-in-Charge.

Supply and fix water pipe line route indicator made of size 400 x 300 x 25mm of precast RCC (1:2:4) type B-O using 12.5 mm graded stone aggregate complete all as specified and directed. Note :- Route indicator should be writen as main water supply line complete as directed by Engr-in-Charge.

Supply and install Electronic Digital Water level indicator with wall mounted Dust proof ABS Plastic/metal enclosure (Microprocessor based latest circuitry) with electronic high requency nonconducting processor based sensor rust free with three wire system at RCC Over Head Tank/RCC underground Sump at Military Station Babina Sensor will be fixed inside of the over head water tank/UG Sump and digital indicator will be fixed on RCC Pillar 1.50 Mtr above ground level at Over head tank/inside the respective pump house of UG Sump and both sensor and level indicator connected with 23/76 three core Super enamal copper stranded wire 0.5 Sqmm Of 25 Mtr length with all necessary fixing arrangements on wall including taking down old unserviceable indicator all as specified and directed by Engr-in-Charge.

S& F of ductile iron Pipe fittings for spigot and socketed or flanged pipes i.e, bends, reducer, tail pieces, tapers, tees, caps etc of 80 mm to 300 mm bore pipe complete all as specified and as directed.

S S F cast Iron fittings for spigot and socketed or flanged ends pipe i.e. bends, reducer, tail pieces, tapers, tees, caps and plugs with MS plate, nuts, bolts washers etc for size 80 to 300 mm bore complete all as specified and as directed.

Supply and fix in replacement of automatic RYB phase sequence corrector in sheet metal enclosure having current rating 150 Ams complete all as specified and directed.

M & L for cutting of stone block pavement/road a depth up to 1.5 mtr below the normal ground level and in width equal to external dia plus 300 mm for lay pipe line upto 300 mm dia across the road in horizontal position and making good the cut portion filled with PCC 1:3:6 type C-2 using 40 mm graded stone aggregates 450 mm thick from TOP over 300 mm thick hard core over filled earth to levelled with existing surfaces for smooth plying of vehicles etc complete all as specified and directed. The repaired portion will be match to the existing surface. Note • Cost of PCC ,hard core,stones and Earth shall deemed to be included in unit rate quoted by the tendered.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .

Description same as per item No 135 above but one fan point controlled by one switch & regulator.

Description same as per item No 135 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description same as per item No 135 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 135 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.

Supply and fixing in repair 9 W LED 6000k 4 feet Decorative ultra slim linear LED fitting fixture with extruded polycarbonate , 2feet MIRROR TUBELIGHT,environmental friendly ,energy efficentinterated driver and wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.

Supply and fixing in repair 20 W LED 6000k 4 feet Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.

S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 63 Amps 'C' series complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated at a level n.exc 50m m above the starting point complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code concealed on wall complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.

S&F MCCB DB/TPN vertical type suitable for 125 amps MCCB as incommer made of sheet steel, powder coated with neutral bus bar 200A, neutral link, IP-43 protection grade 415 Volts 4 way double door complete all as specified and directed.

S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28 watt and minimum air delivery of 220 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and directed. NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard.

Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed, 25 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCB complete all as specified and directed.

S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA ‘C’ series complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S RAJ KUMAR SINGH (BID ID -3291899)

m/s bobby enterprises (BID ID -3287833)

M/S Kharya Associates (BID ID -3285749)

VEER SINGH CONSTRUCTION (BID ID -3288688)