8183 REPAIR REPLACEMENT OF PLUMBING CLEANING OF WATER TANKS INTERNAL WATER SUPPLY FITTINGS PVC TANKS AND OTHER MISC WORK IN AFMC UNDER GE CENTRALPUNE

Amount

Taking up or down carefully following steel tubing and connections including cleaning for refixing or removal from site complete all as directed.

(a) 15mm bore

(b) 20mm bore

(c) 25 or 32mm bore

(d) 40 or 50mm bore

Refixing old steel tubing and connections in new or old postion (wall/floor/ceilings etc) of following size.

(a) 15mm bore

(b) 20mm bore

S & F GI tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as spicified directed.

(a) 15mm bore.

(b) 20mm bore.

(c) 25mm bore.

(d) 32mm bore.

(e) 40mm bore.

(f) 50mm bore.

Cutting chases, pinning in making good to facings where required and pointing in CM 1:4 for concealed water tubing etc complete all as specified and directed.

S & F in repairs bib tap of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specifed and directed.

S & F in rapirs 15mm bore 2 way bib tap chromium plated with wall flange confirming to Cat No F2002161 of Make "Cera" or equivalent model from the specifed makes given in the PS.

S & F in repair 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lettered " HOT" or " COLD" with long screwed shanks and fly nuts, complete all as specified and directed.

S & F in repairs pillars taps CP 15mm bore , cast copper alloy with capstan heads, fancy type screwed down high pressure with long screwed shanks and flynuts complete all as specified and directed.

S & F in repair 15mm bore angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete, all as per Cat No CON-053KN of make Jaquar or equivalent model from the specified makes as given in the make list.

S & F in repairs 15mm bore stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specifed and directed.

S & F in repairs of 15 mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) secrewed both ends for iron pipe or for unions complete all as specifed and directed.

S & F in repairs 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specifed and directed.

All as per item no 12 here-in-before but 25 mm bore.

S & F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 600 mm long complete all as specifed and directed.

S & F in repairs, brass CP soap dish conforming to CAT No. ACN-1131N of make "Jaquar" or equivalent model from the specified make given in the make list.

S & F in repairs Health faucet conforming to CAT No. ALD-573 of make "Jaquar" or equivalent model from the specified make given in the make list.

S & F in repairs CP toilet paper holder conforming to CAT No. ACN-1151 N of "Jaquar" or equivalent model from the specified make given in the make list.

S & F in repairs shower rose fancy type bass chromium plated 125 mm dia heavy duty pattern with swivel joints type screwed for 15mm bore including fixing to pipe or unions complete all as specifed and directed.

S & F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan, 'Pedestal', white , including fixing bolts etc and PVC seat cover white with flat bottom including CP or aluminium anodised hinging devices etc complete all as specified and directed.

S & F in repairs of plastic water closet seat cover black closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specifed and directed.

S & F in repair vitreous china wash hand basin, white, 550x 400mm flat back including fixing with fasteners/CI brackets, PVC waste pipe 32mm dia, and CP brass waste coupling 32mm dia complete all as specified and directed.

S & F in repair vitreous china Urinal half stall type white excluding flushing cistern but with grating and union for discharge pipe etc complete all as specifed and directed.

Taking down old hanging/loose WHB and refixing the same in the same position with fasteners inclduing new waste pipe, CP brass coupling etc all as spd and directed.

S & F in repairs oval shaped vitreous china WHB table top Coyal snow white, fancy type of 460mm dia as per Cat No S2020105 of "Cera" or equivalent model from the specified make given in the make list incuding 32mm CP waste coupling, PVC waste pipe etc complete all as specified and directed.

S & F 15mm bore chromium plated Garnet wall mixer (2 in 1) with arrangement for overhead shower confirming to Cat No F2002401 of "Cera" or equivalent model from the specified make given in the make list.

Dismantling water tanks of capacity exc. 250 Ltrs and not exc. 500 ltrs and removing from site complete all as directed.

All as per item 27 here-in-before but capacity exceeding 500 ltrs and not exceeding 1000 ltrs.

All as per item 27 here-in-before but capacity exceeding 1000 ltrs and not exceeding 2000 ltrs.

S & F rotational moulded polythylene water storage tank of tripple layers 500 litres capacity (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed.

All as per item No 30 here-in-before but 1000 liters capacity.

All as per item No 30 here-in-before but 2000 liters capacity

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes of capacity exc 250 litres but not exc 500 litres complete all as specified & directed.

All as per itme No 33 here-in-before but exc 500 litres and not exc 1000 litres.

All as per item No 33 here-in-before but exc 1000 litres and not exc 2000 litres.

S & F in repairs ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe for the following sizes all as specified and directed by the Engineer-in-Charge.

15 mm bore.

20 mm bore.

25 mm bore.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white/ ivory, with inlet, ball valve, float and handle of 10 ltrs capacity including PVC flush pipe complete all as specified & directed.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specified and directed.

All as per item No 38 here-in-before but overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm without drainage board.

S & F in repairs vitreous china ceramic white Single peice WC (S trap) with UF soft close seat cover, hinges, accessories set, size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent model from the makes given in the make list complete all as specified and directed.

S & F in repairs vitreous china white wall hung urinal of size 340 x 320 x 650 mm , including all accessories , Product Code: URS-WHT-13263 of Jaquar with sensotronic sensor flushing valve for urinal of Product code : SNR-CHR-51097 of jaquar or equivalent model from the makes given in the make list complete all as specified and directed.

S & F in repairs sensor pillars tap CP 15mm bore with control box set , cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks of and flynuts complete, screwed for iron pipe complete all as specified and directed. (Make : CAT No. F6010101 of cera or Equivalent model from the makes given in the make list complete all as specified and directed.

S & F in repair oval shaped vitreous china, under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm, including waste coupling and waste pipe cat No S2030104 of cera or equivalent model from the make given in the make list including 32mm dia CP waste coupling and PVC waste pipe complete all as specified and directed by engineer-in-charge.

S & F box type cabinet of size 330 X 430mm (approx) of PTMT with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed with wooden plug complete all as per Cat No 551 of prayag or equivalent model from the specified make given in the make list including taking down existing one.

S & F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors etc complete all as specified and directed.

S & F in repairs PVC waste pipe for WHB, urinals & sink flexible type of suitable dia complete all as specified an directed.

S & F in repairs PVC connection 60 cm long 15mm dia, with 2 Nos CP brass check nuts complete all as specified and directed.

S & F in repairs steel grating of 100mm dia for nahni trap/floor trap including jointing complete all as specified and directed.

S & F in repairs PVC gully traps, square 125/110mm size with grating including jointing with solvent cement complete all as specified and directed.

Taking down SWR pipes of any type of 75mm to 110 mm bore including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal from site complete all as directed.

S & F 110 mm bore PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

All as per itme No 53 here-in-before but laid in trenches or in floors complete.

S & F 75 mm bore PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

All as per item No 55 here-in-before but laid in trenches or in floors complete.

Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm dia complete all as specified and directed.

All as per item No 57 here-in-before but 75mm dia.

S & F PVC (SWR) bends with oval access door of 110 mm bore complete all as specified and directed.

All as per item No 59 here-in-bofore but 75mm bore.

S & F PVC SWR Branch piece single (Single Y) equal or unequal 110mm bore with access door complete all as specified and directed.

All as per item no 61 here-in-before but 75mm bore.

S & F PVC 75mm bore SWR junction (single 'T') equal or unequal with access door complete all as specified and directed.

All as per item No 63 here-in-before but 110mm bore.

S & F 110 mm bore PVC SWR vent cowl complete all as specified and directed

All as per item no 65 here-in-before but 75mm bore.

M & L for mild steel clamps, bands straps, supports or stays for soil waste pipe & rain water pipes including fixing clamps with screws etc complete all as spd and directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for granite 16 to18 mm thick (of any type,any colour) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L machine cut cuddappa stone slab 20 to 25 mm thick over and including 20mm thick cement sereed bed in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slab one edge ,such as in steps cooking platform and similar situations all as directed.

S & F in repairs long body 'U' shaped sink taps cast copper alloy with chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed bore of pipe 15mm in kitchen sink or counter sink or basin complete all as specified and directed.

S & F in repairs 32mm bore waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and directed.

Demolition of plain cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) and removing rubbish off the premises complete all as directed.

M & L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded aggregate) as in sub base/flooring/ paving complete complete all as specified and directed.

M & L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for Machine pressed coloured precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade over and including 30 mm sand cushioning complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as specified and directed.

M & L Non skid ceramic coloured tiles in flooring 7 to 8 mm thick area of each tile exceeding 0.06 sqm and not exc 0.11 sqm (300x300mm) with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and directed

All as per item No 79 here-in-before but area of each tile exc 0.11 sqm but not exc 0.18 sqm.

All as per item 79 here-in-before but in skirting etc and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:3) including triangular filleting in CM 1:4 on top of tiles complete all as specified and directed.

M & L for coloured glazed Ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar (1:3) on stone / brick/ concrete masonry as a backing coat all as specified and directed.

All as per item No 82 here-in-before but tiles of size 450 x 300 x 7 to 8mm thick.

All as per item No 82 here-in-before but tiles of size 300 x 600 x 7 to 8mm thick.

M & L (dark shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M & L (light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified

All as per item 86 here-in-before but in skirting and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 15mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and directed.

M & L (light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:6 all as specified and as directed.

M & L (light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 all as specified and as directed.

M & L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate)as in surface channels and drains complete all as specified and directed.

Extra forming fair finished drain or channel inner girth n.exc 30 CM in cement, concrete using extra cement including forms, moulds, mitred/stopped ends etc complete.

Demolition of brick work or stone/boulder masonry, built in cement mortar including removing u/s materials from site complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

M & L PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundations, filling in mass concrete complete all as specified and directed.

M & L for PCC 1:2:4 type B1, using 20mm graded aggregates as in benching, kerbs, bed blocks etc all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing rubbish off the premises complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 on brick/ concrete surfaces finished even and fair with spong finish complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper(white or tinted) on walls complete all as specified and directed.

S & F in repairs PVC water tank lid with locking arrangement for 1000/500 litre capacity tank complete all as specified and directed.

S & F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish all as spd and directed.

Refixing of door shutter in the same opening including resecuring or easing and adjusting not exc 1.00 sqm each complete all as directed.

All as per item No 105 here-in-before but exc 1.00 and not exc 2.00 sqm each.

S & F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and directed.

S & F anodized aluminium alloy, 20mm dia hanger rod in cupboards with fixing brackets, stops, rollers etc complete all as specified and directed.

S & F double action door spring hydraulically regulated made up of minimum 1.25mm thick alumimium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removing from site complete all as directed.

S & F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

M & L preparing surfaces of wood or wood based material of any description or girth and treated with tar or coal tar black paint complete all as specified and directed

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete.

S & F mild steel flat iron as in hold fasts fitted to chowkats & welded to angle iron frames complete all as specified and directed

M & L for treating small articles such as stops gratings hold fasts with tar or coal tar black paint complete all as specified and directed.

S & F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F 30 mm thick second class hard wood glazed and skeleton shutters, divided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part- I, Section 8, Clause 8.24 (a) complete.

M & L preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wooden surfaces complete all as specified and directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading and joints together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed.

S & F 75 mm long stainless steel butt hinges for PVC door shutters complete all as specified and directed.

S & F 150mm long aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and directed.

S & F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate 140mm complete.

All as per item No 129 here-in-before but supply and fixed in repairs.

S & F mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil puttyor fixed with beads, each pane n. exc 0.5 Sqm in area complete.

All as per item No 132 here-in-before but frosted glass.

S & F plain fillets made of 2nd class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc.3 & n.exc. 6 Sqcm sectional complete all as specified and directed.

S & F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S & F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F Aluminum powder coated single leaf door on pivots alongwith hydrulic door closer (Aluminium Extruded section), door lock, handles, 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips as given in 'JINDAL' Catalogue complete all as directed by Engineer-in-Charge.

S & F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

M & L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Taking down shutters of any description n.exc. 1 Sqm each & removing from site complete all as directed.

All as per item No 142 here-in-before but exc 1 sqm and not exc 2 sqm each.

S & F 18 mm thk PVC sheet shutter one side prelam of any shade as in cupboard or kitchen cabinet etc complete all as specified.

S & F 18 mm thk solid PVC board as in cupboard shelves , in kitchen cabinet etc complete all as specified.

S & F 75 mm long stainless steel handles complete all as specified and directed.

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S & F Megnetic catcher for cabinets all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M & L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of as grills, gratings ,bracket for truss with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like complete all as specified and directed.

S & F rolled section as in main and cross beam, hip and jack rafters, purlins where connect to common rafters and running rails, fixed with angle cleats or other connection plates FE 410-W (Gde E 250) quality A complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge thickness, including Nainital or smiliar pattern roof coverings complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed in half round with self tapping screws all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

M & L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F PVC 150mm dia half circular eaves gutter including iron brackets and necessary outlet provision etc complete all as specified and directed.

S & F in repairs plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed.

Repairs to steel rolling shutters of any size including necessary welding, streghtning of iron frame, replacemnt of rolling spring/ iron strips, providing necessary lubircant etc and making workable complete all as specified and directed.

Dismantling posts or struts (steel or RCC) of any section, embeded in concrete, brickwork, masonry etc including taking out embedded protion any making good disturbed ground complete all as directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation for post holes in soft/ loose soil not exc 0.5 Cum each and getting out including returnig, filling by ramming earth and removing surplus soil at a distance not exc 50m deposited where as directed at a level not exc 1.50m above the strating point all as specified and directed.

M & L for cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in foundation, mass concrete complete all as specified and directed.

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

S & F mild steel screw bolts 5 to 10mm dia (machine made) with hesagonal or square heads at one end and screwed the other or screwed both ends, each screwed ent to be fitted with washers and one hesagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed (Note: weight of fencing shall be ascertained through BOO)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fising to any type of standard rails straining bots, including securing or tying at crossings with and provision of galvanised mild stee wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

S & F 6mm thick Aluminium composite panels (ACP) flat panel coloured consist of two thin aluminium sheets bonded to a non aluminium core used for external cladding and false ceiling etc. including taking down old existing ACP (any size, any thickness), complete all as specified and fixed as per manufacturers instruction (Note: Colour and make as apporved by GE)

Sujitha Infrastructure