Renovation/up-gradation by providing pre-painted sheet roofing and providing class room facility on open Terrace in the institute of tribal studies at top floor level of student center building in HP University, Shimla-5.

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in suspersture plinth level up to floor V level in all shapes and sizes in : a) cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth a) Cement mortar 1:4 (1 cement :4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). a) Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Note:- Butt hinges and necessary screws shall be paid separately) a)Second class teak wood i)35 mm thick shutters

Providing and fixing paneled glazed shutters for doors windows and clerestory windows using 4 mm thick glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. a) 35mm thick. i) 2nd class teak wood.

Providing and fixing wire gauge shutters using galvanised M.S. ware gauge of average width operator 1.4mm both directions with wire of dia. 0.63 mm for doors windows and closer window with hinges and necessary screws. a) 35 mm thick shutters i) With ISI marked stainless steel butt hinges of required size. Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : a) 2nd class teak mwood i) 50x12 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC10 asperIS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: a) 300 X 16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: a) 200 X 10 mm