PDG. HIGH MAST STREET LIGHT IN GOVT. COLLEGE (WOMEN) AT SEC. 18 IN DISTT. REWARI

Amount

Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire.Size 2.50 sqmm ( 80 / 0.20mm).

Moulded case Circuit breakers.Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.15 amp.to 60 amp. 415 V ,10 KA 3-phase.

Miniature Circuit Breaker and Isolator.Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection.Miniature circuit breakers of 9 KA breaking capacity.SP MCB of 6 amp. to 32 amp.

TP MCB of 6 amp. to 32 amp.

Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 40 mm dia on surface.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 65 mm dia.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections,digging and refiling of trenches. 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level .

Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top Section = 3 mm (Minimum). Bottom Section = 4 mm (Minimum Top Dia = 150 mm Bottom Dia = 410mm Thickness of Galvanization Top = 65 micron (Min.)Bottom = 85 micron (Min.)

Supply and erection of load line i.e. double door TPN vertical distribution board suitable for MCCB as incommer on existing angle iron board / on wall / in pedestal including making nacessary connection with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.4 way Double door TPN distribution board suitable for 63 amp. 4 pole MCCB but without cost of MCCB. (Make : Havell's /Standard/ C&S / Indo asian

Supply and erection of 150 watt. Flood light fitting with all accessories as supplied with the fitting by manufacturer including erection of same on 16 mtr. high mast with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge. Make and model : Crompton- LFLN-150-CDL/60, Bajaj- BGHBM 150W LED XE, Jaquar- LFLD02S150XC

Provision for RCC foundation suitable for 16mtr. High Mast (L.S.)

Shree Krishna Safety Vision