PROVN OF DIAT STUDENT CAFETERIA EXTENSION OF MESS FACILITY AT DIAT DU GIRINAGAR PUNE 25

Amount

B/R PORTION Excavation in trenches, n.exc.1.50m wide and 1.50 m in depth,for foundation of walls,cesspits,manholes,etc.n.exc.10 sqm on plan and getting out in hard/dense soil,etc complete all as specified and directed.

M&L for cement concrete in foundation type D 2, 1:4:8 (using 40 mm gde stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete solid block masonry work in PCC 1:3:6,type C-1,with using 20mm graded stone aggregate,exc.10 cm in width and setting in cm 1:6 ,etc complete all as specified and directed.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B' complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240. Complete all as specified and directed.

M&L for rolled MS work as in wind ties for roofs conforming to Fe-290 W Gde-E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for 15 mm thick plastering on brick/concrete masonry surface to be finished even and smooth(without using extra cement) in cm 1:6 on internal surface of walls,etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof couring /cladding to wall fixed with self tapping screws complete all as specified and directed..

M&L for 15 mm plastering on brick or concrete masonry surface to be finished even and smooth with using water proof compound in cm 1:4 on external surface of walls.(Note:WPC, measured &paid separetly) complete all as specified and directed.

M&L for 2mm thick fibre reinforced translucent corrugated sheeting with two corrugation side lap fixed with self tapping screw and washer in roof,etc complete all as specified and directed.

M&L for Hardcore(Broken boulder) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base surfice finished even and rough to receive floor topping complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4,type B-l with using 20 mm graded stone aggregate as in floor sub-base,etc complete all as specified and directed.

M&L for Non skid,coloured Ceramic tiles 7 to 8 mm thick square/rectangular)area of each tile exc.0.06 sqm but n.exc.0.11 sqm,in floors,etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles shade over with and including 15 mm thick screed bed in cm 1:6,etc. complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in verticle surface of walls 350x350x7/450x450x7 mmthick set and jointed in neat cement slurry & pointed in white or coloured cement to match the tiles shade over with and including 10 mm thick plastering in cm 1:4,etc,complete all as specified and directed.

M&L for 20mm thick granite work in steps,window cill,cooking plateform,etc.in cm 1:4 incl pointing in white cement 1:2 using marble dust and admixture of pigment to match shade of granite,etc, complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for RCC 1:2:4,Nominal mix,type B-1,with using 20 mm graded stone aggregate as in, slab supported on walls,beams and columns in floors,shelves and like,etc complete all as specified and directed.

M&L for formwork to sides and soffits of floor beams,lintels,shelves incl support,overhangs, etc.complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over,cut to length bent to shape required,incl cranking,bending spirally for hooping for columns,hooking ends binding with mild steel wire(annealed) not less than 0.9mm dia,etc, complete all as specified and directed.

Ditto-all as per item no.21 above but 5mm dia and over upto 10 mm dia as in stirrups,spacers,etc complete all as specified and directed.

M&L for 105x60 mm pressed steel door frames with one or more rebates incl necessary fixing luges,hinges,lock strike plate,etc. complete all as specified and directed.

S&F 30 mm thick flush shutters,solid core construction,with block board core and both sides face is covered with decorative veneer,etc complete all as specified and directed.

S&F solid PVC door frame of size 50x47 mm made out of 5mm plain colour PVC sheet reinforced MS square tube,etc complete all as specified and directed.

S&F PVC factory made solid panel door shutter 30mm th. Style consisting of frame made out of MS tubes for top &bottom rails,MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail &bottom rail on either side &as gap insert for top rail &bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &rails with suitable PVC sheet beading,and jointed together with solvent cement,etc complete all as specified and directed.

S&F 250 mm long ,anodised aluminium alloy ,sliding door bolt with hasp &staple(bolt type)and fixing clips of sheet,cast or extruded sections and fixing bolts,etc complete all as specified and directed.

S&F 150 mm size ,Aluminium anodised,barrel tower boltsof extruded type,etc complete all as specified and directed.

S&F 150 mm size ,Aluminium anodised,handles of cast type,etc complete all as specified and directed.

S&F 75 mm size ,medium weight ,butt hinges,cold rolled mild steel,etc complete all as specified and directed.

S&F steel windows with side hung shutters incl pojecting type hinges with steel handle, and steel peg stay,complete glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel ventilators with top hung shutters including hinges,steel peg stay,etc complete all as specified and directed.

S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n.exc.0.50 sqm in each pane,etc complete all as specified and directed.

S&F 15 mm bore GI tubing ,medium grade,with all fittings,fixed to walls or laid in floors,etc complete all as specified and directed.

Ditto-all as per item no34 above but 20 mm bore pipe complete all as specified and directed.

S&F 75 mm PVC floor trap ,plain with grating incl jointing with solvent cement,etc complete all as specified and directed.

S&F PVC (SWR)pipes single socketed,in any length with rubber joints,laid in trenches or in floors,etc complete all as specified and directed.

Ditto-all as per item no.37 above but 110 mm bore PVC(SWR) pipes complete all as specified and directed.

Ditto-all as per item no.37 above but 150 mm bore PVC(SWR) pipes complete all as specified and directed.

S&F WHB ,vitreous china,flat back type,of size 580x400mm with brackets,pillars tap,32 mm waste coupling,waste pipe,etc complete all as specified and directed.

S&F water closet squatting pan,Orissa pattern,size 580x440mm white,with integral foot rests,incl 10 ltrs capacity flushing cistern and flush pipe,etc complete all as specified and directed.

S&F Stainless steel sink,1.00 mm thick for kitchen ,with plugs,washers and wastes: incl cantilever cast iron brackets,connecting union etc,overall size 495x420 mm with bowl size 410x330x160 mm complete all as specified and directed.

S&F 15mm bore,Bib taps,chromium plated alloy with crutch or butterfly handle,screwed down,screwed down for iron pipes,fancy type,etc complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long,etc complete all as specified and directed.

S&F soap dish vitreous china white,approximate size 160x160x90 mm complete all as specified and directed.

S&F tubular towel rail,20 mm dia,D type,60 mm long of brass chromium plated complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F 75 mm PVC(SWR) branch piece,single(single Y) equal or unequal complete all as specified and directed.

S&F 110mm PVC(SWR)branch piece,single equal or un equal complete all as specified and directed.

S&F 110mm x150 mm bore reducer socket PVC(SWR),etc complete all as specified and directed.

S&F 110mm PVC(SWR) vent cowl complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over aco at of primer complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coats of cement base paint over aco at of primer complete all as specified and directed.

M&L for returning,filling in, incl spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed.

Removal of excavated material exc.250 mtr but n.exc.500 mtr and depositing where complete all as specified and directed.

S&F 140 mm size floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring,etccomplete all as specified and directed.

E/M PORTION (INTERNAL E/M SERVICES) M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates and modular flush boxes, Plate for mounting for housing the switches, socket outlets, fan regulators etc, complete all as specified and directed.. (a) One light point controlled by one way switch.

(b) One Fan/Exhuast Fan point controlled by one way switch.

(c) One 3 pin switch socket outlet point 6 Amps on independent board.

(d) One 3 pin switch socket outlet point 6 Amps on same board with other switch complete all as specified and directed.

All as per item No 58.00 above here in before but with copper conductor cable for one 3 pin socket outlet, 16 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

S & F modular switch, single pole,one way 6 Amps capacity complete all as specified and directed.

S & F modular switch, single pole, one way 16 Amps capacity complete all as specified and directed.

S & F modular socket, outlet 2 in 1, 6 Amp capacity complete all as specified and directed.

S & F modular, socket 6A/16A 2 in1, 16 Amp capacity complete all as specified and directed.

S & F ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S & F modular fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as specified and directed.

S & F LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable from ceiling rose to tube light fitting complete all as specifed and directed. Make :- Bajaj Cat Part No - BLRB-DB 118 or eqvt in Wipro/Havell/Crompton.

S & F LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

S & F Batten for LED tube light fitting 10 W complete accessories all as specified and directed. Make. Bajaj, Cat part No-BCLSB 10 WH or eqvt in Wipro/Havell/Crompton.

S & F sheet metal enclosure distribution board SPN 8 way 240 volts, 200 amp busbar rating with IP 43 protection and double door, suitable for mounting MCBs and complete all as specified and directed.

S & F MCB single pole, 240 volts, 6 to 40 Amps, complete all as specified and directed.

S & F MCB single pole & neutral, 240 volts, 6 to 40 Amps, complete all as specified and directed..

S & F fans ceiling complete with electronic type regulator and accessories 230 Volt, 1200 mm sweep. BEE 5 Star rated complete fixing arrangement complete all as specified and directed.

S & F for ceiling fan down rods 1.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and directed.

S & F metal body Exhaust fan heavy duty AC single phase 230 volt 1400 RPM, 50 Hz of size 380 mm sweep with blades, and frame louvers and fixing arrangement complete all as specified & directed. Make : Havells Cat no - Turbo force or eqvt Bajaj / Usha.

S & F Wall mounted fan 400 mm sweep white colour, 230 volts, 55 Watts including fixing arrengenment on wall complete all as specified and directed. Make- Havells or eqvt in Bajaj / Crompton.

S & F water heater storage type, electric capacity 25 liters BEE 5 Star rated and bracket, nut,bolt,clamp, fasner etc, complete all accessories and fixing arrengenment complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit (including concealed) with its accessories complete all as specified and directed for the following (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm, 2 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as specified and directed.

S & F LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and bracket, nut,bolt,clamp etc complete all accessories and fixing arrengenment complete all as specified and directed. Make - Bajaj Cat Part No - ENXT P 30L WH CR PC SD Havells Cat Part No -ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC / Crompton Cat Part No - LTRUMP0030XW.

S & F sheet metal enclosure distribution board SPN 2 ways 240 volts with IP 43 protection and single door, suitable for mounting MCBs complete all as specified and directed.

sagar construction

Sayili Enterprises