PROVN OF WALKING TRACK WITH INTERLOCKING TILING IN SHATRUJEET OFFICERS MESS SOM OF 50 I PARACHUTE BRIGADE AND 5 NOS SECURITY LIGHT FOR ROAD LEADING FROM MAIN ROAD OF AMAR SINGH CAMP TO SINGLE OFFRS ACCN UNDER GE EAST AGRA

Amount

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:4:8 type D2(using 40mm graded stone aggregate complete all as specified and directed

Material & labour for Moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 mix (using 40mm graded stone aggregate) for subbase of flooring complete all as specified and directed.

M&L reinforced concrete pipes, class NP2 and jointed in Cement sand mortar 1:1 complete with collars 300 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make: Kisan/suprem/prince

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in cills, seismic and other similar bands, plinth courses,copings, bed plates, bond stones,kerb stones etc including weathering,slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Material and labour for machine pressed coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over compacted dry sand and jointed with coloured cement slurry and pigment and sides of paver blocks grouted with and including PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate to make straight line complete all as specified and directed. (Note: Sand cushioning shall be measured and paid separately.)

Material and labour for sand cushioning under floors including spreading, watering and consolidation complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layers of sand ( 8 cm deep before laying cable and 15 cm after laying cable ) complete all as specified and directed.

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat complete all as specified and directed.

Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes for and including insertion/ laying of 40 mm bore HDPE of any description below/under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed by Engineer-in-Charge. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt.

S & F GI tubing 25 mm dia " light grade" for cable protection including suitable size MS clamp complete all as required and directed. Make of pipe TATA/Zindal

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed Make of cable: Havells/Grandley/ Gloster

Supply and errection of steel tubular swaged pole 09 mtr long type 410-SP-31 complete with CI base plate . Finial taper plug, bolts, nuts and screws etc including necessary excavation and earth work, in loose/soft soil of size 600 x 600 x 1900mm, PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-1 in plinth block/coping disposal of surplus soil up to 50 M, Painting inside with black bitumen paint and out side with two coats of aluminum paint over one coat of red oxide Primer and numbering of poles and black & white striping up to 1.5 Mtr height, 300mm wide complete all as specified and directed. (Note: All type of PCC work, Cross arms, bolts, nuts, washers shall be measured and paid separately in respective item)

Supply and Fix sheet moulding compound(SMC) junction box for and including three phase and neutral bus bar and MCB SPN 06 Amps, 250 Volts 50 Hz, 15 KA for control of sreet lights mounted on ploe with the provisions of cable entry and exit Make Hensel cat part No KF8350/L&T product code NO GSJB-2817 of size 280mmX170mmX130mm all as directed by the Engineer-in-Charge

S & F LED security light with aluminium pressure die cast housing , high purity PC Fresnel diffuser with silicon gaskets for IP-65 protection, power consumption < 60 W & luminaire lumen > 6600lm and system efficiency > 110lm/W, in built electronic driver prewired upto terminal block with driver efficiency > 85% power factor > 0.95, suitable for external pole upto 35mm, CRI>70, ambient temperature range 0-450C, THD<10%, colour temperature 5700K, surge protection in CM-3.5KV, 50000 burning hours as per L70 criteria, multistage constant current-constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard including GI pipe medium grade ISI mark of size 32mm dia length not less than 1.5 mtrs bending to shape for fixing light and nuts, bolts, clamps as required to fix to wall all as specified and directed. Make:- Crompton Cat Part No. LST-60-CDL or equivalent of Phillips / Wipro/Bajaj

M & L for twin core aluminium conductor 4 sqmm PVC insulated , shetaed wire drawn in pole from juction box to street light and including provn of holes in existing pole whereas required complete all as specified and directed. Make of cable: Havells/Grandley/ Gloster

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burned directly in ground ( earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel wire 4mm dia as earth lead Earth plate to pole test point including 15mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 using 20mm graded stone aggregate, with RCC 550mm thick cover in 1:2:4 TYPE B-1 reinforced with 8mm dia CTD bars @8mm e/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 Note: Earth lead and GI protection pipe up to 7.50 mt length shall be deemed to be included in quoted rate

S & F of street light switch using timer for automatic switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal housed in enclosure made out of anti rust/ shock proof/ termite proof/ confirming to IP54 suitable for 5 KW load three phase( Contactor shell be used Make of ABB/BCH/Legrand) including fixing arrangement with pole complete. Make Timer Nature switch/ Havells /Legrand

Supply and fix cable jointing kit suitable for 1100 Volts grade LTUG cable 16 sqmm for Indoor/outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable complete all as specified and directed. Make : 3M / M-seal/ Denson/Reychem

Material & labour for PCC (1:2:4) type B-1 with using 20mm graded stone aggregate as in 100 mm path, surfaces finished even and fair with chaquerred impresson etc. complete all as specified & directed .

Supply and fixing busbar chamber, Capacity 200 amps, 4 way, 415 volts 4 pole, 50 Hz, 415 volts, on wall /pole/panel with proper lugs having 4 Nos of copper bus bars complete all as specified and directed. (Make SHI, HPL, Havells/Shallab)

m/s Agra Builder

SahaDevSingh Constructions

M/S RISHI RAJ AGRAWAL

Messars Maa Devi Construction Co.

JWALA ELECTRIC CONTRACTORS

m/s het singh sharma const co.

milan enterprises