C/O Ayurvedic Health Centre at Reog Tehsil Kumarsain District Shimla HP

Cutting in earth work by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990 (One Thousand Nine Hundred Ninety) Volume-I (One) and sorting out useful and unuseful matreial and transportation of the unuseful matreial for disposing at dumping site (To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load, animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone, shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge. The recovery for stones, weather useful or not, for the minimum quatom of 27.06 cubic meter (Twenty seven point zero six) @ Rupees 300/- Only (Rupees three hundred) per cubic meter Shall be effected on pro rata basis in all circumstances. Any loss to the public and private properity during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all taxes (GST etc.) and incidental charges.

Excavation in hilly area in all heights and depths in all kinds of soil in retaining walls, breast walls including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., according to the HP.PWD. specification pf 1990 (One thousand Nine hundred Ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer-inCharge through all modes of transportation including head load, animal load or mechanucal means along with its leveling fine dressing and with all kinds of labour (if required). All useful material such as stones, i.e. shingles and slates shall be properly stacked at site recovery to the maximum possible extent in all lesds and lifts through all modes of transportation and used/removed as per the direction of the Engineer-in-Charge. Any loss to the public and private properity during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all taxes (GST etc.) and incidental charges.

Excavation in foundation trenches in earth work in all heights and depths in all kinds soils including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including dewatering where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990 (One Thousand Nine Hundred Ninety) Volume-I (One) and sorting out useful and unuseful matreial and transportation of the unuseful matreial for disposing at dumping site (To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load, animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone, shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge. Any loss to the public and private properity during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all taxes (GST etc.) and incidental charges.

Earth work in excavation for all type of road structures such as retaining walls, breast walls, culverts, drains and parapets etc. in all type of classification of soil comprising of ordinary soil, soft/ hard rocks, chiselling / wedging out of rocks (where blasting is prohibited) as per drawing and MORD technical specifications Clause 305.1, 1104 and 1606.1 and as per directed by the Engineer-in-Charge including setting out construction of shoring and bracing removal of stumps and other deleterious material and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the orginal surface in layers not exceeding 150mm (One Hundred Fifty Milimeters) compected thickness including shorting and strudding and pumping and bailing out water (surface and sub soil water) upto all depth and any quantum of water including cleaning of slush which may arise out during dewatering as as per direction of Engineer-in-Charge and including carriage of material within all leads and lifts and with all taxes (GST etc.).

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Centering and shuttering including strutting, propping etc and removal of the form work including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Flat surfaces such as soffits of suspended floors, roofs, landings and the like.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Stairs, (excluding landings) except spiral staircases.

Edges of slabs and break in floors and walls :-Under 20cm wide.

Vertical surfaces such as walls (any thicknes) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Providing and laying in position specified grade of reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying Plain Cement concrete Grade M-10 (Nominal mix 1:3:6 ) for plain/reinforced concrete in open foundationsand similar works including form work and curing complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 gradedstone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinths required complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying cement concrete work 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete in walls (any thickness but not less than 0.10 metre thickness) including attached pillasters, buttresses, plinth and string courses, etc. from top of foundation upto all heights including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete upto floor all level including carriage of materials in all leads and lifts:-Moulding as in cornices, window sills etc. exceeding 15cm in girth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.)

String courses, copings, bed plates, anchor blocks, plain windows sills and the like

Moulding as in cornices window sills etc. not exceeding 15cm in girth

Steel reinforcement for R.C.C. work with Thermo-Mechanically Treated bars of grade Fe-500 D or more including straightening, cutting, bending, placing in position and binding all complete upto all floor level including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Applying cement slurry on R.C.C slab or cement concrete work using 2.75 Kg of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposite direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Second class half brick work using common burnt clay building bricks in plinth levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Supplying and filing brick bats in soakpit of following sizes including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Boulder filling tightly hand packed under floor including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Back filling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Supplying and filing crushed stone aggregate in soakpit of following sizes including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

25 mm nominal size.

12 mm nominal size

Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in walls in cement mortar 1 : 4 ( 1 cement : 4 sand) and including rakingout joints including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 100mm Dia PVC weep pipes in brick / stone masonry / plain concrete / RCC / abutment / wing wall / return wall extending through to the full length of the structure with slope of 1 : 20 towards drawing face comoplete as per drawing and technical specification clause 614/708, 1204.3.7 including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing wood work Second class Deodar wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 40 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

12mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked

6.0 mm thick glass panes (weight not less than 15.00 kg per sqm)

Providing and fixing 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 35 mm thick second class deodar wood glazed shutters for doors, windows and clerestory windows using 5 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 35 mm thick Second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : :- including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing M.S. grills fixed to steel windows by welding of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 6 mm thick ply wood lining with butt jointing and nails. Framework and cover fillet to be measured and paid for separately including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing square edges 1st class deodar wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc.complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 20 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Anodised aluminium sliding door bolts with bolts and nuts etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Anodised aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing anodised aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & fixing Anodised aluminium hanging floor door stopper (Twin Rubber stopper) ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing brass die cast universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 65x35mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 50 mm CP brass cup board or ward robe knob with nuts complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing magnetic catcher double strip (horizontal type) of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & fixing 115 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & fixing 150 mm Stainless steel single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 200 mm Anodised Aluminium hooks and eyes including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & laying 30X30/40X40 cm Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :-Medium shade pigment using 70% white cement and 30% ordinary cement including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & laying 30X30/40X40 cm Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Medium shade pigment using 70% white cement and 30% ordinary cement including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing & laying anti-skid ceramic floor tiles of size 60X60cm /30X30 cm of 1st quality conforming to IS : 15622 of approved make in requred colours , laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Digital Glazed tile 30X45 cm conforming to IS: 15622 of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Kota stone slab in flooring/ Treads of steps over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Baroda green marble 20 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing edge moulding to 20 mm thick Baroda Green Marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Extra for fixing marble /granite stone, over and above corresponding asic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Extra for making pre finished double nosing in treads of steps of Granite/Marble/Kota stone including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying 60 mm thick interlocking paver block heavy duty precast cement concrete vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over subbase of concrete with 25 mm thick average thickness of cement mortar 1:4( 1 cement : 4 sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complet Subbase concrete floor to be paid for separately including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Garsa slate stone / unistone 12mm. cladding on walls / R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing valley 90 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of a TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing on wall face PVC 150 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive completeincluding carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia PVC door bend

150 mm dia PVC plain bend

150 mm dia Plain Shoe

Providing and fixing M.S. holder bat clamps 150mm dia of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Structural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete: In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing MS hollow rectangular hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Applying priming coat on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Painting with Satin enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth Cement mortar 1:4(1 cement : 4 sand)ncluding carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth in cement mortar 1:6 (1 cement: 6 coarse sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

15 mm cement plaster in pattern as shown i elevation in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth in cement morter 1:6 (1 cement: 6 fine sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

15 mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth in cement morter1:6 (1 cement: 6 fine sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Finishing walls with Acrylic Smooth exterior paint of required shade ,brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ncluding carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Distempering two or more coats on undecorated ceiling/sloping surfaces with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Distempering two or more coats on undecorated wall surfaces with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing G.I. pipes 20 mm nominal bore complete with G.I. fittings including trenching and refilling etc.including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.)..

15 mm dia nominal bore

20mm nominal bore

Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Fixing 20mm nominal bore water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of various capicityand making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Constructing masonry Chamber 30x30x50 cm inside, in brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete. Internal work-exposed on wall including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

1216 mm (16 mm O.D. pipe)

1620 mm ( 20 mm OD pipe).

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete. Concealed work, including cutting chases and making good the wall etc. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

1216 mm (16 mm O.D. pipe)

1620 mm ( 20 mm OD pipe).

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete. External work including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

1216 mm (16 mm O.D. pipe)

1620 mm ( 20 mm OD pipe).

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia

110 mm dia

Providing and fixing 110 mm x 90 mm PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing PVC cowl including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm dia.

110 mm dia.

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

150 mm x 110 mm dia

110 mm x 90 mm dia

Providing and fixing 110mm PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Cutting Chase in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand). 100 mm dia including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing white vitreous china water closet squatting pan (Indian type) (Earthwork, bed concrete and traps to be measured and paid for seperately. Orissa Pan W.C.No. 2071 of Cera/Hindware including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing viterous China wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil/ PBVC pipe with CM 1:1 or with approved adhesive (Seat cover to be measure and paid for saparately). European type WC seat No. 2090 OF PRIMA including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing viterous China wash basin Flat Back 550X400 mm Clair of Cera No 10186 with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing stainless steel Kitchen sink ( size45X60 CM) of Hindware/cera with drain boardof approved standard with C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing white vitreous china laboratory sink Size 550x400x180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing white vitreous china pedestal Cat No 11003 in White shade of Cera /Hindware/Perriware for wash basin completely accessed at the back for the reception of pipes and fittings including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 32 mm dia Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 100 mm CP grating for Nahani / gully / Floor trap including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 600mmx450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws (600x20mm) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing soap dish recessed type stainless steel No. 1531 of Hotelier series fixed to wooden cleats with s.s screws including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing toilet paper holder with flap recessed type No.1553 :of hotelier series of jaquar fixed with stainless steel screws etc complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 100 mm dia C.P Brass shower rose with 15-20 mm inlet including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 15mm dia C.P. brass bib cock of approved quality conforming to IS:8931 with flenge: including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 15mm dia C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing mixture for kitchen sink of Jaquar including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 45cms length 15mm nominal bore uplasticised PVC connection pipe (heavy duty ISI marked IS:8931& 8934) with brass unions including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing C.P Bottle trap (heavy duty ISI marked I.S No 8931 & 8934) for wash basin and sink including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing C.P. brass stop cock (concealed) of standard esign and of approved make conforming to IS:8931 including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 86 mm long, weighing not less than 88 gms including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing PTMT, push cock of approved quality and colour15 mm nominal bore, 80 mm long, weighing not less than 46 gms including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing brass full way valve with wheel including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

15mm nominal bore

20mm nominal bore

Providing and fixing 15mm nominal bore Brass ball way valve( horizontal plunger type) high pressure with polythene plastic floats: including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying 150 mm dia in trenches (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design : including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and fixing in position LD- 2.5 Rectangular shape 610x455 mm internal dimensions pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Supplying and Fixing 300x300 mm Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame for gully trape (Standard Pattern) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete. including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).

Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge and with all taxes (GST etc.).