Renovation of IEI and EEI to Non Residential buildings of Port Management Board including Campbell Bay Jetty under CD, APWD , Campbell Bay. Under PMB Department.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of prewired LED tube lamp fitting 4', 1 X 20 W Essential Bright Batten Similar to make Philips Cat :BN170C LED20S-6500 SU L120 etc as required or Similar in make :Havels,Syska ,Bajaj,cromton.

Supplying of LED Bulkhead fitting Make:- Philips Cat.No.WT202W LED6S NW PSU S2 PC or equivalent complete with all accessories etc as required.

Supplying of LED ADORE 9 Watt B22 WW 2 STAR LAMP Similar to make HavelLs,cat No LHLDEUEEMC8R009. or similar in make in Philips,Syska ,Bajaj.Crompton

Supplying of AC ceiling fan 1200mm sweep Make:-Crompton 1200mm EMPOWER 1 STAR & ISI MARK ,Mode:ENERGIA ,ISI and 1 star (White) or similar in Make:- Usha/Anchor/Bajaj/orient/ Haveels etc complete with all accessories etc. as required.

Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required.Make:- Havells or equivalent in Polycab/Finolex/RR cables.

3 core x 6 sqmm

3 core x 10 sqmm

3 1/2 core x 25 sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required

a) 80 mm dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

Supplying of 50W LED street light fitting SUPERB STREET LIGHT with best in class design & Robust heat sink along with class leading IP,IK & Surge protections for long lasting performance. Make:- Havells Cat No.LHEXAYP7PN6K050,50 W,LED,6500K or equivalent in Bajaj/Crompton Greaves/Philips complete with all accessories etc as required.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

a) 32 mm dia

Fabrication of metallic street light pole of standard length exceeding 4.5 metre but not exceeding 6.5 meters made out of 65mm dia G.I pipe and 32mm dia G.I pipe for fixing street light fitting including fixing sintex box of inside dimension of size 140mm x 140mm x 95mm Code No. GSJB 1414 containing 1 No. MCB 6A etc as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

a) Above 4.5 metre and upto 6.5 metre

Installation, testing & commissioning of LED street light fitting fitting including connection etc as required.

Supplying and fixing of SMC Sintex box of inside dimension 650 mm x 350mm x 240mm Code No. GSJB-6535, etc as required.

Supplying, installation, testing and commissioning of 20 W LED solar street light fittings of hybrid sunstay powered by solar energy and at the same time connected to electric grid . in case abundant sunlight . Make- Philips cat No. BRP710 LED 20 CW MR HY SOLAR IN or similar in crompton,Havells,Bajaj etc. including making bracket to hold fittings with all accessories as per direction of Engineer- in- charge.

M/s Sai Electrical Works

RAVI RAJ ELECTRICALS

DILIP RAJ