Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹27.2 L+₹53,239 (1.99%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹27.7 L+₹1.0 L (3.77%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹27.9 L+₹1.2 L (4.59%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹28.4 L+₹1.7 L (6.43%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS PIN 913867 C/O 99 APO
REPAIR AND MAINT OF EXTERNAL WATER SUPPLY LINES AND ACESSORIES, CLEANING OF UG SUMP AND SERVICES TANK AND MISC ALLIED WORKS AT RHENOCK AND RONGLI UNDER GE 867 EWS
2022_MES_562274_1
GE/867/TOKEN/38 OF 2022-2023
Open Tender
Civil Works
Item Wise
240 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹50,000
29 Jan 2023
10 Nov 2022
3 Dec 2022
10 Nov 2022
1 Dec 2022
24 Nov 2022
10 Nov 2022 - 20 Nov 2022
Amount
M&L for Cleaning of semi under ground water sumps of 50,000 Glns capacity by removing residual/balance water, taking out solid residual loose dirt, scales, mud, fungus, vegetation growth, scrubbing the complete inner surface of wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and fresh water, drying the entire surface and applying two coats of lime wash internally and writing the date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) once in six month complete all asspecified and directed by the Engineer-in-Charge.
All as per Item No 1 here-in-before but 10,000 Gln capacity all asspecified and directed by the Engineer-in-Charge
All as per Item No 1 here-in-before but 5,000 Gln capacity all asspecified and directed by the Engineer-in-Charge
M&L for disconnecting existing PVC water tanks of capacity 2000 ltrs, setting aside (or lowering if requried) cleaning and removing all scale & dirt etc., from tanks and mouths of circulating pipes etc., by using bleaching powder and writing/marking MES Number and date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) and hoisting if requried, re-connecting and re-fixing in position complete all as specified and directed by the Engineer-in-Charge.
All as per Item No 4 here-in-before but 1,000 Ltrs all asspecified and directed by the Engineer-in-Charge
All as per Item No 4 here-in-before but 500 Ltrs all asspecified and directed by the Engineer-in-Charge
All as per Item No 4 here-in-before but 250 Ltrs all asspecified and directed by the Engineer-in-Charge
M&L for construction of Valve chamber of internal dimension/size 600 x 600 x 600 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC (1:3:6) type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar (1:6), with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar (1:6), finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level).
All as per item No 8 above but Valve chamber of internal dimension/size 900 x 900 x 900 mm.
S&F gun metal, globe or gate valves of 50 mm bore dia, with iron wheel head, screwed both ends for iron pipes and fixed including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge. Make : Zoloto/TATA/Scud.
All as per Item No 10 here-in-before but 40 mm bore dia all asspecified and directed by the Engineer-in-Charge
All as per Item No 10 here-in-before but 25 mm bore dia all asspecified and directed by the Engineer-in-Charge
All as per Item No 10 here-in-before but 20 mm bore dia all asspecified and directed by the Engineer-in-Charge
All as per Item No 10 here-in-before but 15 mm bore dia all asspecified and directed by the Engineer-in-Charge
Supply only Aquafit brand Calcium Hypo Chlorite 65% to 70% Chlorine content in grangular and tablet form complete all as specified and as directed. Make : M/S Sree Rayalaseema Hi- Strength Hypo Lt or equivalent makes as approved by Command/ E-in-C.
Dismantling of old unserviceable tank of any make existing PVC water tanks of 2000 Ltrs all as specified and as directed.
All as per Item No 16 here-in-before but 1000 Ltrs all asspecified and directed by the Engineer-in-Charge
All as per Item No 16 here-in-before but 500 Ltrs all asspecified and directed by the Engineer-in-Charge
All as per Item No 16 here-in-before but 250 Ltrs all asspecified and directed by the Engineer-in-Charge
S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed tops) hoisted and fixed in position of 2000 Ltrs capacity, all as specified and as directed. Make : Sintex/Reno or as approved. Make : Sintex/Polycon/Rotex/Reno or ISI marked as approved.
All as per Item No 20 here-in-before but 1000 Ltrs capacity all asspecified and directed by the Engineer-in-Charge
All as per Item No 20 here-in-before but 500 Ltrs capacity all asspecified and directed by the Engineer-in-Charge
All as per Item No 20 here-in-before but 250 Ltrs capacity all asspecified and directed by the Engineer-in-Charge
Taking up or down existing galvanized iron water tubing and connections, carefully without any damage from the trenches, ground or walls of the 50 mm bore sizes, including cleaning for re-fixing.(Excavation and earth work measured and paid separately) all as specified and as directed.
All as per Item No 24 here-in-before but 40 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 24 here-in-before but 25 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 24 here-in-before but 20 mm bore size all asspecified and directed by the Engineer-in-Charge
S&F in replacement steel water tubing of the 80 mm bore bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground.(Excavation and earth work measured and paid separately) Make : TATA/JINDAL/NEZONE/SURYA/BANSAL.
All as per Item No 28 here-in-before but 50 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 28 here-in-before but 40 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 28 here-in-before but 25 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 28 here-in-before but 20 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 28 here-in-before but 15 mm bore size all asspecified and directed by the Engineer-in-Charge
Re-fixing the old steel tubing and connections in new or old position in trenches, ground, of 50 mm bore sizes all as specified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 40 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 25 mm bore size all asspecified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 20 mm bore size all asspecified and directed by the Engineer-in-Charge
S&F Cast Iron sluice valve by replacing the u/s of 80 mm dia bore, both ends flanged, with iron wheel, brass spindle complete with jointing materials, nuts, bolts, washers and rubber sheet etc including dismantling old unserviceable one all as specified and directed by the Engineer-in-Charge. Make : Karloskar/Leader/Upadhaya/L&T/HAZRA/RMCO
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/loose soil all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil all as specified and directed by Engr-in-Charge.
Removing excavated material n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point
M & L for painting on old surfaces with two coats of synthetic enamelled paint on a coat of red oxide primer complete including prepartion of surfaces, all as specified and directed by the Engineer-in-Charge.
S&F PVC cover for polythene water storage tanks of 2000 Ltrs capacity of different make like sintex/polycon or eqvli etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable one all as specified and directed by Engr-in-Charge..
All as per Item No 43 here-in-before but 1000 Ltrs capacity all asspecified and directed by the Engineer-in-Charge
All as per Item No 43 here-in-before but 500 Ltrs capacity all asspecified and directed by the Engineer-in-Charge
M&L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc Upto 40 to 50 mm dia GI tubing all as specified and directed by Engr-in-Charge.
All as per Item No 46 here-in-before but Upto 25mm dia all asspecified and directed by the Engineer-in-Charge
S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 25 mm dia pipe incl taking down old u/s one, all as specified and as directed. Make : PRAYAG or equivalent. Make : Zoloto/TATA/Scud
All as per Item No 48 here-in-before but 20 mm dia all asspecified and directed by the Engineer-in-Charge
All as per Item No 48 here-in-before but 15 mm dia all asspecified and directed by the Engineer-in-Charge
Excavation in post holes (or simillar holes) each not exceeding 0.5 cum , getting out, retaining, filling in and ramming earth or broken rubble mixed with earth around, in layesrs not excedding 25 cm, watering and removing surplus soil to a distance not exceeding 50 mtr and making good surfaces completed all as specified.
M & L for Providing precast cement concrete solid building block over 10cm in width and setting in mortar 1:6 using pre cast cement concrete Block (1:3:6) type C1 (using 20mm graded stone agg) all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concrete complete all as specified and directed.
M & L PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate ) as in coping including weathering, slightly rounded or chamfered angles and throating , as directed and necessary from work complete all as specified and directed.
M & L 15 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces , rendering finished even and smooth without using extra cement complete all as specified and as directed..
M & L preparation of new plastered surfaces of walls and applying two coats of white wash on walls complete all as specified and directed.
M&L for construction of angle iron stage made out of MS equal angle of suitable size of thick complete including fabricated work all as per specified and directed at site.
Cutting of PCC making holes inserting GI pipe and making good disturbed surface, all as specified and as directed.
S&F Butter Fly Valve lever operated conforming to IS 13095 of size upto 40/50 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc all as specified and directed. Make : Zoloto/TATA or any other approved make
M&L for Collect sample of raw water from any location at Rhenock and Rongli mil stn, Chemical laboratory testing of water from local PHE department and submit the report to concerned JE (E/M) complete all as specified and directed by Engr-in-charge
Repair to u/s sluive valve 80mm bore by dimantling all the parts after removing from site and replacement of all parts like spindle, GM lock, nuts, gasket, nuts both and washer etc to make fully serviceable and refixing the same in original position including connection complete. Note : (Brass spindle will be measured and paid separatley)
All as per item No 61 but for 50mm bore
Supply only brass spindle suitable for 80mm bore sluice valve
All as per item No 63 but for 50mm bore
M&L for Repair / replacement of old u/s sign board with LED glow signage board complete with acrylic raise along with LED pasted on ACP os size 4.5 x 2 feet marking at MES PUMP HOUSE RHENOCK in MES installation at Rhenock and Rongli det including suitable structure with metallic piller on both side and provision of electric supply arrangement for fixing of LED signage board complete.
All as per Item No 65 here-in-before but at MES PUMP HOUSE RONGLI all asspecified and directed by the Engineer-in-Charge
M&L Painting of GI pipes of any size with two coats of synthetic enamel paint after scratching the existing paint properly and cleaning the surface properly all as specified and directed by Engineer-in-charge.
Dismantling the PVC body multigrade filter unit existing frontal pipe line and valves, reactive of existing filter media, sevicing of multi port valve refilling the media, changing of filter, membrance all as per existing specifications all as per original complete including topping up and reinstallation of unit and testing complete all as specified and directed by Engr-in-Charge
Dismantliing of existing pressure pump set from RO Plant of capacity 1.5 HP single phase complete dismantling the parts for inspection overhauling replacement of all U/S Parts i.e.bushed bearing impellers capacitors, vernishing, rewindingof single phase motor winding and replacement of coupling shaft seal complete to build up the pressure for smooth functioning of RO plant complete all as specified and directed.
Replacement of reverse osmosis micron cartridge of existing type and make complete incliding taking down existing worn out ones complete and all as directed.
M&L for repair / replacement of Dosing Systems : Anti-scaling, Type :DosingTank & Electronic dosing pump. Capacity of pump :(0-5) LPH (each) Head of pump :10 MWC Capacity &rating of motor :0.25HP, 220V, 1phase, 50Hz. Make of pump : IMP Solution preparation tank :Provide (CLINTSCOP) complete all as specified and directed.
M&L for repalcement of inter cinnection pipes, valves and fittings , No.Offered : One Lot Type of Pipes :UPVC,& SS.Type of Valves : Ball valves complere all as specified and directed.
M&L for in repair / replacement of electrical cable :One Lot Type :PVC insulated PVC sheathed Copper conductor :Copper cable, 3core, 2.5sq.mm (min) Make :Lemonus/Equiv. complete all as specified and directed
M&L for in repair/replacement of Instrumentation for RO Pressure Gauges :03Nos.Flow Indicator :02 No as per existing size and specifications all as specified and directed.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
DEDUCTED AMOUNT OF SCHEDULE OF CREDIT
DEEP CHANDRA JOSHI
MANOJ JINDAL
PRASAD PRADHAN AND SON
SANJAY MITTAL
JAYSHREE CONCERN
HEM RAJ GURUNG
S K ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .