REPAIR AND PAINTING OF STEEL FURNITURE OF OTM AND MD ACCN UNDER GE NORTH UDHAMPUR

Amount

SOFA SET 5 SEATER Taking down old unserviceable cushions of seat and back of sofa set 5 seater and supply and fixing approved quality 100 mm thick 32 density foam cushions for seat and 50 mm thick 32 density foam cushioned for back duly covered with velvet/tapestry cloth not less than Rs.200/- per metre for seat and back of sofa set five seat consisting of three pieces viz one three seater and two single seat for seat and back. The size and shape of seat and back shall be as per existing sofa /drg. Make of foam shall be Sleepwell/Kurlon/Featherfoam with respect to sample approved by Accepting Officer, complete all as specifed and directed. Drg No FD-258.

Applying one coat of french polish on the Sofa Set five seater after preparing the old surface and making smooth surfaces by rubbing with suitable emeryry paper complete all as speified and as directed by Engineer-in-Charge. Drg No FD 258

Taking down old unserviceable cushions with cover of seat and back of sofa set and Supplying and fixing new foam cushions 32 density of size 22 "X 21" x4" inch, Make:- Sleepwell/Kurlon/Featherfoam duly covered with velvet/tapestry cloth not less than Rs.200/- per metre complete all as specified and shown on drg and directed.Drg No FD-281/258/ (FD/MAP-II/ 02)

SOFA SET 2/3/5 SEATER Taking down old unserviceable cover of seat and back of sofa set and Supplying and fixing new covers with velvet cloth not less than Rs.200/- per metre complete all as specified and shown on drg and directed.Drg No FD-281/258/(FD/MAP-II/02)

Applying one coat of french polish on the Sofa Set five seater after preparing the old surface and making smooth surfaces by rubbing with suitable ambry paper complete all as speified and as directed by Engineer-in-Charge. FD-281/1113(FD/MAP-II/02)

Applying one coat of french polish on the Sofa Set four seater after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. Drg No FD-281/1113(FD/MAP-II/02)

CHAIR WRITING Removing of unservicebale front legs from chair writing. S & F of new approved qualifty seasoned teak wood new gets to match other legs as per existing pattern complete all as per drgs/specifiction and as directed by Engr-in-Charge. Drg No FD 250

All as per item No 7 above but rear legs.Drg No FD 250

All as per item No 7 above but front/back/side rails of seat Drg No FD 250

All as per item No 7 above but stiffner Drg No FD 250

All as per item No 7 above but arms Drg No FD 250

Applying one coat of french polish on the chair writing after preparing the old surface and making smooth surfaces by rubbing with suitable ambry paper complete all as speified and as directed by Engineer-in-Charge. Drg No FD 250

CHAIR DINING Removing of unserviceable front leg from chairs dinning and S & F of new approved quality seasoned teak wood leg including polishing of new legs to match other legs as per existing design, pattern complete all as per drgs/ specification and as directed by Engr-in-Charge. Drg No FD-279

All as per item No 13 above but rear legs.Drg No FD 279

All as per item No 13 above but front/back/side rails of seat Drg No FD 279

All as per item No.13 here in before but back rest batten. Drg No FD 279

All as per item No.13 here in before but stiffner. FD 279

Applying one coat of french polish on the chair Dinning after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. Drg No FD 279

CHAIR EASY Removing of unserviceable front leg from chair easy and S & F of new approved quality seasoned teak wood leg including polishing of new leg to match other legs as per existing design, pattern complete all as per drgs/ specification and as directed by Engr-in-Charge. Drg No FD 229

All as per item No.19 here in before but rear leg Drg No FD 229

All as per item No. 19 here in before but front/ back/side rail of seat and back. Drg No FD 229

All as per item No.19 here in before but arm Drg No FD 229

Apply one coat French polish on the chair Easy after preparing the old surface and making smooth surfaces by rubbing with suitbale emery paper complete all as specified and as directed by Engr-in-Charge.

CANNING OF CHAIR WOODEN OF ALL TYPES Removing of old unserviceable cane from all type of woodoen chairs, bin soiled linen, stool dressing CB etc., and supply and fixing new approved quality (as approved by the GE) white plastic cane 2mm wide semi round and weaving the same in Godrej pattern. Canning holes shall be covered with 4mm wide semi round white plastic cane complete all as shown on drgs and directed by Engineer-in-Charge. FD 250 280 16 228 279 285 229

CHAIR DINING CUSHIONED (MAP) Removing of UNSV front leg from chair dining and S/F new approved quality seasoned 1st class teak wook leg to match other leg as existing pattern/design Drg No (FD/MAP-II/04)

All as per item ser No 25 above but rear leg

All as per item ser No 25 above but back batton

All as per item ser No 25 above but front/rear/side rail

Taking down UNSV cushion with plywood 12mm (make-Kitply/Century/Greenply) of seat of chair dining cushioned (MAP) SF new approved quality 75mm thick 40 density foam covered with velvet cloth incl 12mm plywood as size and shape of seat of existing chair cushion make : Sleepwell/Kurlon with respect to sample approved by Accepting Officer rest all as specified in drg and directred by Engr-in-Charge.

Applying two coat of french polish to Chair dinning cushioned (MAP)after smoothing surface by Emery paper. Rest all as specifed on Drg.

CHAIR PVC ORNATE Removing/replacement of old UNSV cushion with cover seat of Ornate PVC and S/F new seat with cover with nut and bolt (Make - Supreme Ornate) as existing chair rest all as drg and directed by Engr in Charge. TP

Removing/replacement of old UNSV cushion with cover back of chair Ornate PVC and S/F new back with cover with nut and bolt (Make - Supreme Ornate) as existing chair rest all as drg and directed by Engr in Charge. TP

TABLE WOODEN VARIOUS SIZES Removing of old unserviceable leg from table 3'x2' with and without drawers and supply and fixing of new table leg as per existing size / shape / pattern, made out of first class well seasoned teak wood including polishing to match the other parts, Complete all as specified and as directed.Drg No FD283 284 223

All as per item No.33 here in before but for table 3' x 3', complete all as specified.Drg No FD291

All as per item No.33 here in before but for table writing, complete all as specified. Drg No FD275

All as per item No.33 above but table dinning six persons, complete all as specified. Drg No FD273

All as per item No.33 above but table dinning eight persons, complete all as specified. Drg No FD 273

All as per item No.33 here in before but for table centre, complete all as specified on Drg

All as per item No.33 here in before but for Tea-poy wooden, complete all as specified. Drg No FD278

All as per item No.33 here in before but for peg table, complete all as specified.Drg No FD277

Removing of old unserviceable rear/front rail from table 3'x2' with and without drawers and supply and fixing of new table rail approved quality as per existing size/shape/pattern, made out of first class well seasoned teak wood Drg No FD 283 284 223

All as per item ser No 41 above but table 3'x3' complete all as specifed Drg No FD 291

All as per item ser No 41 above but table dining 6 pers all as specifed Drg No FD 273

All as per item ser No 41 above but table dining 8 pers all as specified Drg No FD 273

All as per item ser No 41 above but table centre complete all as specified. Drg No FD 274

All as per item ser No 41 above but peg table complete all as specified. Drg No FD 277

All as per item ser No 41 above but table writing complete all as specified. Drg No FD 275

All as per item ser No 41 above teapoy wooden complete all as specified. Drg No FD 278

All as per item ser No 41 above but side rails of table 3'x'2 complete all as specified.Drg No FD 283

All as per item ser No 41 above but side rail of table writing complete all as specified. Drg No FD 275

All as per item ser No 41 above but side rail of table dining 6 pers all as specifed Drg No FD 273

All as per item ser No 41 above but side rail of table dining 8 pers all as specified Drg No FD 273

All as per item ser No 41 above but side rail of table centre complete all as specified. Drg No FD 274

All as per item ser No 41 above but side rail of teapoy wooden complete and all as specified FD 278

All as per item ser No 41 above but side rail of peg table complete all as specified. Drg No FD 277

All as per item ser No 41 above but side rails of table 3'x3' complete all as specified. Drg No FD 291

All as per item ser No 41 above but stifner of table 3'x2' / writing, complete and all as specified Drg No FD 284 FD 275

Replacing of old UNSV table top of 3'x2' providing new table made out of prelaminated particle board (one side deraocative)exterior grade BWR with 4mm teak wood edging of all round of top of table complete all as specifed and as shown on Drg No FD 283 284 223

All as per item ser No 58 above but top of table 3'x3' complete and all as specified. Drg No FD 291

All as per item ser No 58 above top of table writing complete and all as specified Drg No FD 275

All as per item ser No 58 above but table dining 6 pers all as specifed Drg No FD 273

All as per item ser No 58 above but table dining 8 pers all as specified FD 273

All as per item ser No 58 above but teapoy wooden complete and all as specified Drg No FD 278

All as per item ser No 58 above but teapoy verandah complete and all as specified Drg No FD 278

All as per item ser No 58 above but top peg table complete all as specified. Drg No FD 277

All as per item ser No 58 above but topof table Centre complete all as specified.

HAT STAND Removing old unserviceable broken looking mirror from Hat stand and Supply and fixing new approved quality 5 to 6mm thick (plus/minus 5 % tolerance) electro copper plated sheet glass mirror of size 440 x 300mm of make Modi / Atul / Saint Gobin with respect to sample approved by Accepting Officer, duly fixed with wooden frame made of teak wood and 6mm thick commericial ply wood including applying two coats of French polish after preparation of surface complete all as specified and as shown on drgs and directed. Drg No FD 233

Removing of old unserviceable broken aluminium pegs from hat stand and supply and fixing of new approved quality (as approved by the GE) 120mm long aluminium pegs complete all as specified and shown on drgs and as directed.Drg No Drg No FD233

DRESSING TABLE LADIES Removing old unserviceable broken looking mirror form table dressing ladies and S&F new approved quality 5 to 6mm thick(plus/minus 5 % tolerance) electro copper plated sheet glass mirror of size 1220 x 365mm of make Modi / Atul / Saint Gobin with respect to sample approved by Accepting Officer, duly fixed to existing wooden frame and 6mm thick commercial ply wood including applying two coats of French polish after preparation of surface complete all as specified and shown on drgs and directed by Engr- in -charge.Drg No FD251

Removing old unserviceable broken glass shutter from ladies dressing table and Supply and fixing of new approved quality 5mm thick glass shutter of size 300x290mm of make Modi / Atul / Saint Gobin with respect to sample approved by Accepting Officer, complete all as specified and as shown on drgs and directed.Drg No FD251

Removing of Unsv knob from drawer of Table dressing Ladies and S&F of knob(as approved by GE)

Apply two coat French polish on the Dressiing Table Ladies after preparing the old surface and making smooth surfaces by rubbing with suitbale ambry paper complete all as specified and as directed by Engr-in-Charge.Drg No FD-251

DRESSING TABLE GENTS Removing of old unserviceable broken looking mirror from table dressing gents and Supply and fixing new approved quality 5 to 6mm thick (Plus/minus 5% tolerence) electro copper plated sheet glass mirror of size 760x360mm of make Modi / Atul / Saint Gobin, to be fixed in existing wooden frame and 6mm thick commercial ply wood including applying two coats of French polish after preparation of surface complete all as specified and as shown on drgs and directed.Drg No FD-230

POLISHING Polishing to table 3'x2', wooden complete all wooden surface exposed in view with two coats of french polish after smoothing the surface with emery paper and filling holes/cracks with putty properly complete all as specified and as directed. DRG NO FD 223 283 285.

All as per item No.74 here in before but for table dinning eight persons, complete all as specified. Drg No FD273

All as per item No.74 here in before but for table dinning six persons, complete all as specified. Drg No FD273

All as per item No.74 here in before but for table 3' x 3', complete all as specified. Drg No FD291

All as per item No.74 here in before but for table writing, complete all as specified. Drg No FD275

All as per item No.74 here in before but for table centre, complete all as specified.Drg No FD274

All as per item No.74 here in before but for Tea-poy wooden, complete all as specified. Drg No FD278

All as per item No.74 here in before but for table dressing gents. Drg No FD230

All as per item No.74 here in before but for hat stand Drg No FD-233

All as per item No.74 here in before but for peg table Drg No FD-277

All as per item No.74 here in before but for Side Board

All as per item No.74 here in before but for Almirah Mess Utensil Drg No FD 93(M)

All as per item No.74 here in before but for Book Case

All as per item No.74 here in before but for Table Bed side

TRESTLE STORE ROOM Removing of old UNSV broken long battens after taking down from trestle store room wooden and supply and fixing of top battens of size 2.44mm x 10cm x 10 cm made of well seasoned shesham wood. The fixing shall be done with standard workmanship. The edges shall be rounded with file/abrasive paper, complete all as specified and as directed by Engr-in-charge Drg No FD 86(M)

All as per item No.88 here in before but for centre battens (stiffners) of size 2.04mx6cmx10cm Drg No FD 86(M)

All as per item No.88 here in before but for shorts battens (stiffners) of size 60cmx6cmx10cm Drg No FD 86(M)

All as per item No.88 here in before but for legs of size 40.5cmx10cmx10cm Drg No FD 86(M)

Use creosote oil two coat internally /externally on trestle store room rest all as specified and directed by engr in charge Drg No FD 86(M)

BED PLYWOOD TOP WOODEN Taking out unserviceable ply wood top from bed ply wood and supply and fixing new ply wood top of 12mm thick BWR grade ISI marked(Make of plywood- Kitply/Century/Greenply with respect to sample approved by Accepting Officer) to cover the bed from head rest to foot rest fully without any joint.. Finishing shall be done in accordance with standard workmanship. Rest all as per drgs specified in particular specifications and as directed by Engr-in-Charge. Drg No FD-246

Removing broken long rail of bed plywood top and S & F of new long rail made of Ist class teakwood as match with existing long rail of bed.Rest all as specified and directed by Engr-in-charge.Drg No FD-246

Removing broken stiffeners of bed plywood top and S & F of new stiffeners made of Ist class teakwood as match with existing stiffeners of bed.Rest all as specified and directed by Engr-in-charge.Drg No FD-246

Removing broken headrest of bed plywood top and S & F of new headrest made of Ist class teakwood and as specified in drg as match with existing headrest of bed.Rest all as specified and directed by Engr-in-charge.Drg No FD-246

Removing broken Footrest of bed plywood top and S & F of new Footrest made of Ist class teakwood and as specified in drg as match with existing Footrest t of bed.Rest all as specified and directed by Engr-in-charge.Drg No FD-246

Applying two coat of french polish on the Bed py top wooden after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. Drg No FD-246

TABLE BED SIDE Removing of old unsv shutter of table bed side and S & F of new shutter made of approved quality MDF board as per the drg with suitable hinges . The fixing shall be done with standard workmanship. complete all as specified and as directed by Engr-in-charge Drg No FD/E6/MA/P/07

Removing of old unsv handle of table bed side and S & F of new handle made of approved material as per the drg. The fixing shall be done with standard workmanship. complete all as specified and as directed by Engr-in-charge Drg No FD/E6/MA/P/07

Kalia Construction Company

TULSI RAINA AND SONS

shivom builders

DEV RAJ MAGOTRA

PUSHPAK INDUSTRIES

harish kumar and co