Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC 140 ANAND NIWAS SET NO 2 ENGINE GHAR SANJAULI SHIMLA 171 006 | SHIMLA | HIMACHAL PRADESH | 171006 | L1 | Accepted-AOC L1 and reasonable | |
| 2 | L2₹6.9 L+₹42,500 (6.59%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹5.8 L
EMD Value
₹11,600
Closing Date
18 Jun 2020, 6:00 pmClosed
CWE Shimla Hills Jutogh
CWE Shimla Hills Jutogh Jutogh Cantt Shimla - 171 008
SPECIAL REPAIRS TO ROAD FROM CAPT COLONY GATE TO SENTRY POST AT 14 GTC SUBATHU UNDER GE KASAULI.
2020_MES_340323_1
CA NO CWE/KAS-12 OF 2020-21
Open Tender
Civil Works - Roads
Item Rate
180 days
Subathu
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE Kasauli
₹11,600
Yes
27 Jun 2020
23 Apr 2020
20 Jun 2020
23 Apr 2020
18 Jun 2020
14 May 2020
Amount
Scarifying or picking gravelled macadam or bituminous macadam surfaces exc 50 mm and not exc 100 mm deep in area exceeding 400 Sqm complete all as specified.
75 mm thick (compacted thickness) WBM with coarse aggregate (granite) of grading II (40 to 63mm size) spread, voids filled with screenings and blinded with coarse sand rolled and consolidated to required gradient and camber, complete all as specified.
Preparing surface of unsurfaced water bound mecadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified.
Applying evenly a priming coat of paving bitumen of grade VG-10 @ 10Kg /10 Sqm on unsurfaced surfaces i.e pot holes and WBM surfaces complete all as specified.
Preparing surface of black top by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified.
Applying evenly a priming/tack coat of paving bitumen of grade VG-10 @ 5Kg /10 Sqm on black top surface complete all as specified.
Premix bituminous macadam (consolidated thickness 75mm or less) with binder content 4% by weight of total mix, rolled with 8 to 12 ton power road roller and compacted to required camber, gradient complete all as specified and as directed.
Bituminous pre-mixed asphaltic dense concrete 40mm consolidated thickness, with 6% binder content by weight of total mix, using paving bitumen of VG 10, spread,rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified. Note : (i) Automatic hot mixing plant of adequate capacity shall be used for heating and mixing of aggregate, bitumen etc for premix dense asphaltic concrete and mix for both items shall be laid with mechanical pavers. (ii) Quantity of bitumen in dense asphaltic concrete shall be used as per design mix and shall be approved by the GE. Any variation in quantity of bitumen in desigm mix shall be priced as specified in the particular specification through deviation order. Unit rate quoted shall deemed to include the cost of design mix.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.
Removing spoil (material obtained from scarifying) to a distance exceeding 500 metres but not exceeding 1000 metres and depositing where directed complete all as specified.
PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channels/drains complete all as specified.
Extra for forming fair finished drain or channel 60 cm inner girth in forms, moulds/stopped ends etc complete all as specified.
2.5mm thick road marking strips (reflective) of specified shade colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gum beds dispenser propane tank healers and profile shoe heater drivern by skilled operator on road surfaces including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc as per applicator specifications complete all as specified.
M/S H S ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .