NATIONAL COMPETITIVE BIDDING FOR RENOVATION AND UPGRADATION WORK OF AUDITORIUM AT WALMI, LUCKNOW

Roof Work

Dismantling roofing including ridges, hips, valleys and gutter etc. and stacking the material within 50 metres lead of Asbestos Cement Sheet

Providing corrugated G. S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purloins, rafters and trusses and including cutting to sixe and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m2

Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively

False Ceiling

Providing and fixing with 20mm beveled tegular mineral fiber false ceiling tile (NRC 0.7) mineral fiber ceiling tiles at all higts of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 0.99%, Light Reflectance >_ 85%, Thermal conductivity K=0.052-0.057w/m k, Fire performance as per (BS 476 pt-6&7 in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @ 120gsm) comprising of main T runners of 15X32 mm of length 3000mm cross T of size 600X600mm suspended from ceiling using galvanized mild steel item galvanized &80gsm 50mm outer diamater m-6 dash fasteners, 6mm diameter fully threaded hanger rod upto 1000mm length and I-shape level adjuster of size 85x25X2 mm shaped at 1200mm center to center alone main T The system should reset on periphery walls/partition with the help of FI perimeter wall angle of size 24X24X3000 mm made of 0.40 mm thick sheet to be fixed to the wall with help of plastic plug at 450mm center to center & 40mm long dry wall S. S screws. The exposed bottom portion of all T-section used in false ceiling support system shall be pre painted with polyester backed paint for all heigts. The work shall be carried out as per specification, drawings and as per direction of engineer in charge.

Acoustic Wall Paneling

Providing and fixing at all height wall paneling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mmx50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden molded corner beading of triangular shape to the junction of paneling etc. with iron screws all complete as per direction of Engineer- in- Charge. 12 mm thickness

Air Conditioning Work

Supply and Installation, Testing and Commissioning of modular type variable refrigerant Flow /variable refrigerant volume Air Cooled out door units suitable for cooling heating ,having all hermetically sealed inverter type scroll compressor(s),minimum two compressor for above 14 HP modules, microprocessor based Controller, top discharge type condensing units(s) with R 410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Condition and work even at 50C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10% 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The cop at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 and System complete in all respect excluding cost of Indoor Units of VRB Type with Modular outdoor units, equipped with Highly Efficient Scroll, all Inverter for connection error, auto address settings, Refrigerant temperature control and capacity 3x20 HP all complete including as per techenical specification

Supply and Installation, Testing and Commissioning of following minimum capacity 4way flow VRV/VRF cossets Type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower ,multispeed motor ,coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration, isolation, cord less remote control etc. suitable for operation on single phase 230V+10%,50Hz ac supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving single from BMS system. The cooling capacity of Indoor will be at air inlet conditions of 27 C WB temperature. 1.6 Tr.

Doors and Windows

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings all complete as per direction of Engineer- in- charge (Door handle lock and stopper etc to be paid separately)

Proving and fixing Brushed Stainless Steel Door Handle Set With Built-in Lock of size holt to hole :950 mm including all

First class teak wood in plank 0.181 Cumx1000= 181.00 Cum

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Misc. Item

Providing and Fixing chromium plated brass Curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P brass screws and PVC sleeves etc. wherever necessary complete. 25 mm dia.

Providing and fixing of door closer of approved quality(Godrej/Ozone/ Equivalent as directed by Engineer-in-Charge.

Direction and place identification sign with size more than 0.90 sqm Board Providing and erecting direction and place identification retro- refectories sign as per IRC-67 made of high intensity grade shelling. the retro reflective sheeting type-IV shall be tested for 3 year out door weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government repost shall be uploaded while quoting tender vide clause 801.3 fixed over aluminum sheeting 2mm thick with exceeding 0.9 sqm Supported on a milled steel single angle iron post 75x75x6 mm 2Nos firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete.

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank (500 litre), IS :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Furniture

Auditorium Chair High Back (Gee ken) Model-Audi 11

High back Revolving Chairs (Gee ken) Model-GA5006

Non Revolving Chairs (Gee ken) Model-GM245

Stage Table (Gee ken)

Wooden Podium with acrylic Plate, Logo and name of approved colour & size (Gee ken)

VIP Chair (Gee ken) Model-GA564

Sofa (3 Seater) (Gee ken) Columbia 3 (Leatherette)

Centre Table (Gee ken) Mega

CIVIL WORKS

Flooring

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm (nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:2:4 (1 cement 2 coarse sand (zone-III)4 graded stone aggregate 20mm (nominal size)

Dismantling tile work in floor and Wall laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

S/F 10 m.m. thick glazed/ matt finish vitrified tiles of size 600x600 more approved company like Rack, Johnson, So many or equivalent make of approved shade, colour and pattern as directed by Engineer- in- charge in floor, skirting or dado laid with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to mach the tiles shade etc. complete including supply of all material, labour and T&P etc required for proper completion of work.

Plaster

Dismantiling existing plaster including disposal of refuse as directed by the Engineer- in-charge with in a distance of 60 metre (200ft.)

12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Painting

Scraping old white or colour wash including disposal of refuse as directed by the Engineer – in- charge with in a distance of 60 meters (200ft)

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (Ist quality (Royal, Silk)

Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T&P etc, required for proper completion of work. Paint to be used should confirm to th I.S.I. No 103 1950

Work on Approach Road

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm (nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:2:4 (1 cement 2 coarse sand (zone-III)4 graded stone aggregate 20mm (nominal size)

12 mm Thick Cement plaster 1:3 (1 cement 3 coarse sand) finished with a floating coat of neat cement

Fire Fighting System Supply, Installation, Testing & Commissioning of addressable fire- alarm system control Panel, fire retardant conduits, fire resistance cables and boxes, with internal SMF lead acid batteries with sealed cells of 24v capable of running for a minimum of 8 hours in normal condition and 30 minutes in alarm condition with integral battery charger complete as required and as per specifications and directions of the Engineer- in- Charge

Supply, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc, as required.

Supply, installation, testing & commissioning of manual call box of ABS type in surface/ recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supply, installation, testing & commissioning response indicator on surface, recess MS box having two LEDs metallic cover complete with all connection etc, as required.

Supply, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in ABS box with hinged cover plate & suitable for operation with amplifier i/e line matching transformer etc. complete as required.

Supply, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/ zone covered, complete with all connections, interconnections as requied (4 zone)

12 Volt, 60 AH SMF Batteries

Supplying & laying of 2X1.5 sqmm fire survival armored cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armoring & LSZH outer sheath complete as required.

Renovation of Toilets

Dismantling tile work in floor and Wall laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

S/F 10 m.m. thick glazed/ matt finish vitrified tiles of size 600x600 more approved company like Rack, Johnson, So many or equivalent make of approved shade, colour and pattern as directed by Engineer- in- charge in floor, skirting or dado laid with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to mach the tiles shade etc. complete including supply of all material, labour and T&P etc required for proper completion of work.

S/F 8mm thick glaze/ matt finish antiskid scratch fee, joint free hard industrial floor Giles like group 025 (Somany) or equivalent make of size more then 500x500 mm of approved shade, colour and pattern in floor, skirting or in dado lade with 1:3 cement and coarse sand mortar and joints finished with white cement slurry and polishing complete including supply of all material, labour and T&P etc, required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/e fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chare, Concealed work including cutting chases and making good the walls etc,

25 mm nominal outer dia pipes

80 mm nominal outer dia pipes

100 mm nominal outer dia pipes

Providing and fixing floor mounted, white vitreous china single piece double traps symphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings nuts, bolts and gasket etc, including making connection with the existing P/s trap, complete in all respect as per directions of Engineer- in- charge.

Providing and fixing water closet squatting (Indian type W.C. pan) with 100 mm sand cast iron P or S trap. 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS :7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx size 610x390x370mm having pre & post flushing with water (250 ml & 500ml consumption) having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer- in- charge

Urinal Partition : Providing and fixing custom made urinal Partition wall of size 450x2000 mm in wash Room made of 12mm frosted glass with polished edges with brushed stainless steel finish wall brackets complete as per technical specifications and designs & direction of the Engineer in charge

Toughened glass 12 mm thickness size = 0.45x2.00

Extra for Frosting size= 0.45x2.00

400 mm long fin plate without fasteners (pair)

Providing and fixing wash basin with C.I. Brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock having foam flow technology. 15 mm nominal bore

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 32 mm dia

Providing and fixing PTMT Bottle Trap for Was basin and sink Bottle trap 31mm single piece molded with height of 270 mm ettective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25mm minimum water seal, weighing not less than 260 gms

Vitreous china pedestal for wash basin

Providing and fixing mirror of superior glass (of approved quality) and of required shap and size with plastic moulded frame of approved make with shade with 6mm thick hard board backing: Rectangular shap 100x 450mm

Health Faucets/ Jet with 1.5 mm connection pipe

Providing and fixing PTMT liquid soap container 109mm wide, 1225mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645 mm, width 78mm and effective height of 88 mm, weighing not less than 190gms

Providing and fixing brass stop cock of approved quality 20mm nominal bore

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) 20mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete 20 mm nominal bore

C.P Brass Twin Bib Cocks

C.P. Brass Auto Close/Swan Neck Pillar Cock

Hand Driers

Stainless Steel Rectangular type Grating with open able lib 150 mm size 18 mm high with 100mm dia (110gm)

C.P. Brass extension nipple (size 15mm x 50mm)

Elbow

Brass Socket

Brass Union Coupling

Electrical Works

Earthing with copper earth plate 600mmx600mmx3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per the technical specifications and direction of Engineer-in- Charge.

Providing, Laying & fixing complete electrical wiring and cables & fixtures including design of Electrical Circuit, Distribution Panel/ Board and Modular Switches, Sockets, LED Lighting, Wall Fans, Exhausts etc. as per the requirement complete in all respect and as per the technical specifications and directions of Engineer-in- Charge.

Wiring for light Point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (Group C½

Wiring for light/ power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No, 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit along with 2 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required (For light plugs to be used in non residential buildings)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But with out MCB/RCCB/Isolator) 12 Way SPN

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V. on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without (MCB/RCCB/Isolator)

4 way (4+12), Double door (TPN)

6 way (4+18) Double door (TPN)

Supplying and fixing 5A to 32 A rating, 240/415 V, 10kA "C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. 6-32 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc, as required,

40 Amp. 4P MCB (10 KA)

63 Amp. DP MCB (10 KA)

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Laying and fixing of one number PVC insulated and PVC sheathed, XLPE power cable of 1.1 KV grade of following size on cable tray as required. upto 35 sq.mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade required of size 31/2x35 sq.mm (32mm)

Brass compression gland for (25mm)2x35 sq.mm 1.1 KV grade cable

Aluminum lugs for 35 sq. mm cable

Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray of Size 225mm width x 50 mm depth x 1.6mm thick (Galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required as per technical specifications and directions of Engineer – in- Charge.

Supply and fixing of Wall fan with Remote (Speed 1360 RPM, Sweep Size 400 mm, Power 50 Watts) all complete

Erection and testing ventilating fan & parametric air extraction. Size 150 mm, Brushed Stainless steel finish, Exhaust Fan Power :18 Watts, Operating Voltage: 220-240 Volts Complete in all respects.

Supply and fixing of recess/ surface/Pendent mounting round 12 to 15 watt LED Down Lighter having Powder coated die cast aluminum housing with heat sink, diffuser/ Reflector and driver set complete in all respect (CAT:AAA)

Supply and fixing of recess mounting found Ceiling cutout 160mm height 55mm 18 watt LED Down Lighter having Powder coated die cast aluminum housing with heat sink, diffuser/ Reflector and driver set complete in all respect (CAT:AAA)

Supply and fixing of LED Tube Light with suitable for up to 1x22 watt LED tube light complete including tube etc. on surface complete in all respect. (CAT:AAA)

Supply and fixing of recess/ surface mounting round 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminum housing with extended heat sink, diffuser/ Reflector and driver set complete in all respect (CAT:AAA)

Supply & fixing of 36 Watt to 46 Watt indoor recess/ Surface mounting LED Square Fitting for Armstrong Ceiling having powder die cast aluminum housing body with extended heat sink and diffuser of special polycarbonate material and driver set, complete in all respects. (CAT:AAA)

Supply & fixing of 55 Watt indoor recess mounting LED Square Fitting for Armstrong Ceiling having powder die cast aluminum housing body with extended heat sink and diffuser of special polycarbonate material and driver set, complete in all respects. (CAT:AAA)

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaries with driver set confirming to IP 65 65 and above Protection complete in all respect. (CAT:AAA)

Supply and laying of aluminum conductor PVC insulated armored saved sheathed cables 1100 Volts grade at a depth of 750 mm below round level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the Engineer-in charge, complete in all respect. The armoring of the cable shall be property connected with the earth conductor by clamps etc. (s) 300 sq.mm 3-1/2 core

Supply and fixing of brass nickel plated compression gland for PVC insulated & armored served sheathed, underground cable including rubber ring etc complete in all respect. The armoring of the cable shall be properly connected with the earth as per direction of Engineer in Charge

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer in Charge.

M/S ANAND CONSTRUCTION COMPANY