Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹33.9 L+₹3.1 L (9.92%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹33.9 L+₹3.1 L (9.95%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹34.9 L+₹4.1 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹35.3 L+₹4.5 L (14.7%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
6 Feb 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST ALLAHABAD
GE WEST ALLAHABAD NEW CANTT ALLAHABAD
REPAIR TO OTM ACCN LEFT OVER UNITS AND CENTRAL INSTITUTE UNDER AGE BR-I AT NEW CANTT ALLAHABAD
2023_MES_573628_1
8613/E8
Open Tender
Civil Works
Item Rate
270 days
NEW CANTT ALLAHABAD
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE WEST ALLAHABAD
₹1 L
Yes
4 Mar 2023
7 Jan 2023
8 Feb 2023
7 Jan 2023
6 Feb 2023
25 Jan 2023
Amount
Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site and complete all as specified and directed
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25 mm thick plain cement concrete type B1 1:2:4 (20mm graded aggregate) as in levelling course on floor and other similar works complete all as specified and directed.
M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06sqm but n exc 0.11 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
All as per item No. 5 above but in skirting /dado etc with and including 10 mm thick rendering in cement mortar 1:4 on wall.
M&L for vitrified light shade floor tiles (scratch free) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
All as per item No. 7 above but in skirting /dado etc with and including 10 mm thick rendering in cement mortar 1:4 on wall.
M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
M&L for 18 to 20 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete in repairs all as specified and directed.
M&L for 18 to 20 mm thick machine cut kota stone as in riser of step, dado and skirting over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete in repairs all as specified and as directed.
M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 9-10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer i.e.. cement mortar (1:6) complete all as specified and as directed. Make: Somany (Durastone) / Kajaria (Duratech) / Johnson (Endura).
M&L for 25 mm thick sand filing / cushion under floors / interlocking or in foundation incl watering and consolidation complete all as specified and directed.
M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all as specified and directed. Note: Sand filling / cushion shall be paid separately.
M&L for 80 mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all as specified and directed. Note: Sand filling / cushion shall be paid separately.
M&L 40 mm thick PCC flooring type B1 (1:2:4) (using 20 mm graded aggregate) with even and smooth surface by using extra cement and with glass dividing strips complete all as specified.
M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 in repairs complete all as specified.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, sub base etc complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded BT stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified.
M&L for plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cement including taking down existing concrete complete all as specified and directed.
M&L RCC type B-1 1:2:4 using 20mm graded stone aggregate as in kitchen shelves etc including demolition of old slab complete all as specified and directed.
M&L form work to suspended slab as in kitchen shelves etc surface finished even and fair complete all as specified and directed.
M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns, hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Demolition of brick work built in cement mortar of any description including all quoins arches, pillars, etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M&L for brickwork with fly ash bricks , straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for half brick work with fly ash bricks straight or curved on any radius built in CM 1:4 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on internal surfaces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces of RCC or brick surfaces to be finished even and smooth without using extra cement complete as all specified and directed.
M&L for cement concrete 1:5:10,type E-2 (40 mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed.
M&L for 40 mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed.
M&L for disconnecting existing water tanks, 500 to 1000 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.
S&F in repairs ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore minimum weight 142 gms complete all as specified and directed.
S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.
S&F for in repairs vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed.
S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.
S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F in repairs for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.
S&F in repairs 15 mm bore chromium plated fancy type stop valves with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed.
S&F in repairs CP angle stop cock/valve of 15mm bore screwed down for high pressure with crutch or butter fly handle, screwed both end for iron pipes complete all as specified and directed..
S&F in repairs 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads, long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle, screwed both ends for pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.
S&F in repair for 125 mm size fancy type chromium plated shower rose with swivel joints, and connecting rod including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs toilet paper holder CP fixed to wall with chromium plated brass screw complete all as specified and directed.
S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.
S&F in repair urinal spreader with CP connection pipe complete all as specified.
S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified.
S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.
S&F in repairs flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed.
S&F in repairs 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc.
S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brackets and fixing brackets complete all as specified and specified.
S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to draft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.
S&F in repairs stainless steel kitchen plate rack of 900X1200 mm size (Min weight 4.50 Kg) complete all as specified.
S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.
Dismantling mild steel work of any description in any position complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.
S&F 6mm thick asbestos cement one-piece plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed.
Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.
Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed.
Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)
Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assessable roof area complete all as specified and directed.
All as per item No 88 but tiles to be reuse of serviceable tiles obtained from dismantling
M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material, fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed.
Dismantling of old CGI sheet (corrugated, semi corrugated etc) from roof coverings including ridges of any type & any description as directed.
S&F 0.50 thick (including coated thickness) pre-colour, pre-profiled corrugated (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.
S&F 0.50 thick (including coated thickness) pre-colour, plain type sheet (Galvalume/Zinkalume) any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, used as in ridge fixed with self tapping screws all as per manufacturer/profile maker instruction complete all as specified and directed.
M&L for steel work in square or rectangular hollow section used as in purlins, rafter, column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. using induction butt welded tubes conforming to IS-4923-1997 grade st-310 complete all as specified and directed.
S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size and 0.30 mm thick (MS galvanized (PPP CGS)) with main tee, cross tee and wall angle grid hanging with 4mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.
S&F in repair 4 mm thick non asbestos fiber cement building board of 600x600 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.
Dismantling of old existing aluminium Doors /windows/wall partitions of any type and in any size complete all as specified and directed.
S&F fabricating anodized aluminium frame work, door shutter ,windows , partitions with one or more rebates sections of approved tint as required for partions including beading, cleat, screws, fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
S&F powder coated aluminium anodised grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed .
S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.
S&F in repair 75 mm size 4 levers aluminium mortice lock, vertical type complete all as specified.
S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.
S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F 12 mm thick toughened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make Sandhoo/Samrat) with two Nos decorative type aluminium handle of 200 mm dia , complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.
Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete all as specified.
S&F MS framed work as in doors frame, doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified.
M&L for 32 mm thick flush shutters with block board core & plywood face panels commercial type on both face complete all as specified and directed.
S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.
S&F steel windows or ventilators with side/top hung shutters with Z section iron work including box type friction hinges, steel handle, steel peg stay and glazing bars welded complete all as specified and directed.
S&F 3 Track UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5mm Glass/wire mesh as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and as directed.
S&F 2 Track UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5mm Glass/wire mesh as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and as directed.
S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.
S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Dismantling of old unserviceable hinge / tower bolt / handle / sliding bolt and other doors or window fittings as required for replacement complete all as specified and directed.
S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.
S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.
S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.
S&F 300mm long, aluminium alloy, anodised AL drop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.
S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.
S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed.
S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed.
Supply only galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm for new door / window shutter complete all as specified and directed.
Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.
S&F in repair prelaminated MDF type board 17/18 mm thick, interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination as in Cupboard Shutter / Cupboard shelves complete all as specified and directed.
S&F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified.
S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.
M&L for preparation of old decorated surface of walls and applying one coat of white wash on wall complete all specified.
M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and as directed.
M&L for preparation of old plaster surface of wall scrapping machine tools /electric hand grinder with wire brush and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall scrapping machine tools /electric hand grinder with wire brush and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
M&L preparation of old decorated surface of external wall scrapping machine tools /electric hand grinder with wire brush and applying one coat of apex weather proof external paint on wall or facia etc complete all as specified and directed.
M&L for preparation of old painted surface of wooden work and applying one coat of synthetic enamel paint on surfaces of any description exc 10 cm width or girth with paint sprayers complete all as specified and directed.
M&L for preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint on old steel surfaces for grills, guard bars ,shutters etc complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of oil bound distemper with paint sprayers complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed.
M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for reparation of newly plaster surface of wall and applying two coats of white wash complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coats of internal plastic emulsion paint white or tinted on wall with paint sprayers complete all as specified and directed.
M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint with paint sprayers over a coat of pink primer complete all as specified and directed.
sethi tradres
Technological Associates
Channa Brothers and Co.
M/S Garg Sons
JMD Enterprises
M/S VIVEK DUBEY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .