Fabrication, Supply, Installation, Testing and Commissioning of Cable carrier systems and its associated works at Zone 1, 2, 4 and Delay tank (Phase-I) at Building No. 503 in FRFCF, Kalpakkam

Supply and Installation of MS Brackets,Supports, Frame work, Clamps, Base Channels,etc. fabricated out of angle / Channel / Rodsetc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/galvanising as follows including supply of required, fasteners, nuts, washers, etc. as per the tender specification and drawings. (Refer Sec VI, Clause No.11). GI: MS fabrication With hot dipped galvanising Note : The height of Installation of Cable tray supports varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, support modification at site, cutting, welding, anchoring etc. is in the scope of the contractor.

Fabrication, assembling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq. m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Ladder Cable tray straight 2500mm length X 150mm width x 100 mm depth x 2.0 mm thickness. with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assembling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq. m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size Laddder Cable tray straight 2500mm length X 300mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assembling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq. m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size Ladder Cable tray straight 2500mm length X 450mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assembling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq. m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size Ladder Cable tray straight 2500mm length X 600mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Perforated Cable tray straight 2500mm length X 150mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Perforated Cable tray straight 2500mm length X 300mm width x 100 mm depth x 2.0 mm thickness. with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Perforated Cable tray straight 2500mm length X 600mm width x 100 mm depth x 2.0 mm thickness. with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray straight 2500mm length X 150mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray straight 2500mm length X 300mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray straight 2500mm length X 600mm width x 100 mm depth x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray cover straight 2500mm length X 150mm width x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray cover straight 2500mm length X 300mm width x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Fabrication, assemling, supply and installation of hot dipped galvanized (average weight of zinc coating per unit area - 610 gm/Sq.m and coating thickness minimum of 75 microns) steel (IS:2062 Grade-BR) size of Solid Cable tray cover straight 2500mm length X 600mm width x 2.0 mm thickness with GI coupler plates, GI clips, GI bolts, nuts & washers with thickness of 2.0 mm as per drawings, specifications and scope of work. Note : The height of Installation of Cable tray varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, Cable tray modification at site, cutting, welding, etc. is in the scope of the contractor.

Supply, fabrication and installation of the 25mm X 6 mm of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation as per tender specification. (Refer Sec VI, Clause No.12.9). Note : The height of Installation of 25mm X 6 mm of Hot dip Galvanised GI Flat varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, flat modification at site, cutting, welding, etc. is in the scope of the contractor.

Supply and Installation of 95 Sqmm tinned stranded copper as Earthing conductor in Built in trenches on walls, poles, RCC Concrete, floors including supply of GI spacers mounting accessories of bolts, nuts, washers, cu lugs, clips, cleats, clamps, saddles with spacer plates, welding etc, for Cable tray earthing as per tender specifications.(Refer Sec VI, Clause No.12.5). Note : The height of Installation of 95 Sqmm tinned stranded copper conductor varies from 5meters to 10meters. For installation of these necessary arrangements like ladder, scaffolding arrangement, boom lift, safe working arrangement at height, 95 Sqmm tinned stranded copper conductor modification at site, cutting, etc. is in the scope of the contractor.

End Termination of the 95 Sq.mm sizes of annealed, tinned, stranded Copper conductor including supply of copper crimping lugs etc. (Refer Sec VI, Clause No.12.6).

Please Enable Macros to View BoQ information