JUDICIAL OFFICERS RESIDENCE AT GURDASPUR, DISTT. GURDASPUR (UNDER DEPOSIT WORK) PKG-2, CIVIL WORKS

Amount

CIVIL WORKS:

Construction of Pump Chamber size 3.05 m x 3.70m without gravel pit but including electric wiring as per DWSS standard design and analysis complete in all respects. Extra for provision for Sanitary Latrine in pump chamber for foundation and plinth of WC rooms including flooring ,PVC pipes , Junction Box , 1 No. Leach Pit , Super structure WC room etc.

Providing & installing, testing & commisioning of 1 no electrically driven Submersible Pump set of KSB or equivalent make of capable of delivering 257 LPM against a head of 40 mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter,Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc. including M.S column Pipe of IS 1239-2004 medium class suitable size 65 mm & length 35mtr (in 3.00 mtr lengths each with flanges,screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable of 70 mtr length and 2.50 mm2 size as per IS694-1990 reaffirmed 2000 complete in all respects

Rate of Motor with Pump

Panel Board

Submersible cable Size 2.50mm2

Column Pipe (G.I) 65mm i/d

Providing erection testing and commissioning of MHC pumping set having capacity as 257 LPM against a head of 35 mtr. 5.00 BHP of reputed and approved make KSB/ Crompton or equivalent make complete in all respect (including pannel board, cable and column pipe) .

Rate of Motor with Pump

Panel Board

Submersible cable Size 2.50mm2

Column Pipe (G.I) 80mm i/d

Providing & Installing 100 mm dia delivery main (from Tube-well to duck foot bend including cost of C.I.D/F Pipes, D/F Sluice Valves, D/F Non Return Valve & Specials as C.I. Bends, Tail Piece Tees, Pressure gauge, Air Valve,,V notch haudi etc. inside the Pump chamber as per DWSS standard design and analysis complete in all respects. (Annexure-3) As per IS1536-2001 & 1538-1993 reaffirmed 1999 and electro steel Casting/Kesoram pipe make).

Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)

Constructing One No. UGSR of capacity 25000 litres of size 4.00 Mtr. dia and 2.00 Mtr. working depth with 0.46 Mtr. freeboard complete in all respect. (the drawing and design will be submitted by the contractor and got approved from the competent authority) including Carriage complete in all respects

uPVC RISING MAIN From Tubewell to UGSR

Providing, laying, Fixing, jointing, cutting & testing of uPVC Pipes & Specials (10 kg./cm2) including cost of excavation complete in all respects as per ISI-4985 standard analysis. (Supreme /Finolex/Prince/Jain/Kissan Make or equivalent make)

110mm o/d (Mechanical)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage. D.I. Pipe as per IS 8329 DI-K7

D.I. Pipe as per IS 8329 DI-K7 80mm i/d pipe lines laid complete

80mm i/d pipe lines laid complete

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

D.I. specials upto 300mm i/d

Taking quantity 10% cost of pipe Line

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI

80mm i/d Sluice Valves flanged

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Size 0.6 m. x 0.6 m.

Size 0.9 m. x 0.9 m.

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.

110 mm i/d pipes

160 mm o/d pipes

Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.

For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L. For all classes of soil except rocky

Sand Fillling around UPVC Pipe

For covering Sewer Line Type II

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.20 nos manhole size 75x120 cm for sewer line qty as below

Cement Concrete 1:4:8 with stone blast 40 mm guage using concrete mixing volumatric type 10 x 1.81 x 1.36 x 0.20 = 4.92 cum

First Class brunt brick work laid in cement sand mortar 1:5 in foundation and plinth. 10 x 2(0.98 + 1.43) x 0.23 x 1.20 = 13.30cum

Cement Concrete 1:2:4 with stone blast or shingle. using concrete mixer volumetric type. 10 x 1.20 x 0.09x0.04 = 0.86 cum

Floating coat of 1.50mm thick neat cement laid in one operation to the toping (on benching) 10x1.20 x 1.10 = 13.20 sqm

12.5 mm thick Cement Plaster 1:3. and cement rendring on plaster 1 mm thick 10 x 2 (0.75 + 1.20) x 1.20 = 46.80 sqm.

Reinforced Cement Concrete M-20 mechenically batch mixed using batch type concrete mixture as per IS 1791 and vibrated by needal vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. for Slab 10 x 1.21 x 1.66 x 0.20 = 4.015 cum Less for Cover 10 x 0.61 x 0.455 x 0.20 = 0.555 = 3.46 cum

Coldtwisted deformed (ribbted/tore steel bar) bars Fe 500 grade as per IS 1786 - 2008 for R.C.C. works where not including in the completed rate of R.C.C. including bending and placing in position complete. Tor Steel 3.46 cum @ Rs.80 KG. P/Cum = 276.80 Kg. or 2.77 Qtl.

Providing orange colour safty foot rest of minimum 6 mm thick plastic encapsulated as per IS 10910 on 12 mm dia steel bar confirming to IS 1786 having minimum cross section as 23 mm x 25 mm and overall minimum length 263 mm and width as 166 mm with minimum 112 mm space between protruted legs having 2 mm thread on top surface by ribbing or chequering besides necessary adiquates ensuring protection on tail length on 138 mm as per standard drawing and suitable to withstand the bend test and chemical resistant test as per specification and having manufactures permanent identification mark to be visible even after fixing, including fixing in manhole with 230 x 150 x 75 cm cement concrete block 1:2:4 (1 cmement : 2 Sand : 4 stone aggregate) complete as per design. 10 X 4 = 40 Nos.

Providing and fixing 560 mm, 500 mm and 450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS 12592-2002 including carriage from the store of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manhole including cement concrete coaping (M-20) arround the frame etc. dia of steel for lifting hook is 16 mm (For EHD & HD).

560 mm i/d RCC manhole cover with frame (b) Heavy Duty

Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. complete in all respects.

with existing sewer of 300 mm id and below

Contractor shall be quote rates only for dismantling of mettaled road & back filling with excavated earth fully compacted the restoration of the mettaled road to its original condition will be done by the concerned department i.e. PWD (B&R) PMB/Panchayati Raj)

Roof Top Rain water Harvesting

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

200mm o/d pipe of 4 Kgf. / sqcm (For Storm water Line)

160mm o/d pipe of 4 Kgf. / sqcm (For connection of Road gully and water line)

Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge

Haudi Inside size 90x 90 cm and90 cm deep

Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge

No. of Haudi @ 5mtr. C/c Distance of Rain water Pipe line

RECHARGE WELL

Boring with casing pipe for tube well in all soils excepth ordinary hard rocks requiring blasting including removing the casing pipe after the tubewell is lowered & tested equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc, complete in all respect Boring with 200mm i/d Housing pipe (CSR 28.72 (c))

Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818-2010, including required hire and labour charges, fittings & accessories etc. all complete for all depths, as per direction of Engineer-in-charge.

150mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (CSR 28.93 (b)

Supplying & Fixing of M.S pipe bail plug suitable for 200 mm dia UPVC casing pipe having thickness of socket as 12 mm ,length 100 mm & base plate of 8 mm thick complete in all respect.

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying at quarry site of gravel of 1/16" to 1/8" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe)

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 150mm internal diameter

Earth work in excavation in foundation and trenches

Ist class burnt brick work in (1:4) CSM in foundation and plinth and extra for circular

Extra for Circular work

12.5mm thick cement plaster (1:2)

Providing and placing in position filtering media in Horizontal layers 50 mm to 75 mm broken stone

Ist Layer

Supplying and placing of fine gravel 20mm to 25mm crushed bajri 2nd Layer

Supplying and placing of fine gravel 6mm to 20mm crushed bajri

3rd Layer

Supplying and placing of Course screened bajri 3mm to 6mm

Centring and shuttering for flat surface such as Suspended floors, Roofs, Landing, Chhajjas, Shelves etc.

RCC Man hole Cover size 560 mm i/d heavy duty

Wrought iron and mild steel ladders, framed grills, complete fixed in position.

FIRE FIGHTING ARRANGMENTS

Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.

100mm internal diameter

150mm internal diameter

200mm internal diameter

SITC of MS Pipe Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.

25mm internal diameter

40mm internal diameter

50mm internal diameter

65mm internal diameter

80mm internal diameter

100mm internal diameter

150mm internal diameter

200mm internal diameter

SITC of Butterfly valve Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.

SITC of Cast Iron Flanged Non Return Valve Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.

100mm i/d check valve

150mm i/d check valve

Providing and fixing S.S Pressure Gauge complete as required complete in all respect.

Dial diameter 100mm calibration 0-16 Kg

SITC of Two Way Fire brigade Inlet Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank).

Two Way inlet connection

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks

Providing and fixing in position automatic brass ball valves in tanks.

25mm i/d Brass ball valve with plastic ball with G.I. socket

50mm i/d Brass ball valve with plastic ball with G.I. socket

Construction of Foundation for PVC water storage tank including RCC slab

Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.

Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.

Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.

900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)

600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel)

Providing & fixing C.I/D.I Flanged end, stemof SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in- charge).

100mm i/d Sluice Valves flanged

150mm i/d Sluice Valves flanged

200mm i/d Sluice Valves flanged

Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.

Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.

Weight @5 Kg per Box

Supplying an Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68 / 79 degree centigrade of 15 mm dia orifice sprinler head to approved by UL/SN

Supplying and Fixing Sidewall Sprinkler rated at 68 / 79degree centigrade, quartzoid bulb type, 15 mm dia orifice sprinler head to approved by UL/SN complete in all respect.

Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 4.5kg capacity

Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity

Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required

Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all restect

Providing & Installation Testing and Commissioning of 25mm dia 1200mm long flexible pipe having UL Approval for 25kg/Cm2 complete with socket reducer etc. as required.

Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. Make Newage complete in all respect.

100 mm control valve

Supply, Installing testing and commissioning of electric driven terrace pump capable of delivering 2900 RPM, 450 LPM of water against total head 30 mtr with suitable capacity electric motor including the cost of reinforced cement concrete foundation complete in all respects

Providing, installing testing and commissioning of control panel board for the machinery complete in all respects.