Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹49.4 L+₹3.5 L (7.64%)Rejected-Finance 60 310A 3 KHERIA MOD JAGNER ROAD AGRA 01 | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being higher bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tech Area Agra
GE AF Tech Area Agra
SPECIAL REPAIR FOR REPLACEMENT OF WATER PUMP AND MOTOR AGAINST BER AT CERTAIN LOCATION INCLUDING CERTAIN MINOR AND REPAIRS ADDN ALTN WORK AT AF STATION UNDER GE AF TECH AREA AGRA
2022_MES_550610_2
8200-1454/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE AF Tech Area Agra
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE AF Tech Area Agra
₹84,000
Yes
14 Jan 2023
8 Oct 2022
31 Oct 2022
8 Oct 2022
29 Oct 2022
15 Oct 2022
8 Oct 2022 - 10 Oct 2022
Amount
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.
S&F expanded metal/hard drawn steel wire febric of weight not exceeding 4 Kg /sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to steel members complete all as specified.
Removing broken/damaged RCC drain covers of any size and thickness including depositing the debries at place to a distan n exc 1.5 km as directed by engr-in-charge
M&L for cleaning /de-silting of drain n.exc. 60 cm wide and n.exc 100cm in depth by removing deposited soft / loose soil, oil, grease and other foreign materials and removing the scavanged material / debris to a distance n.exc 50 m and deposited wherever directed complete all as specified and directed
Demolition of cement concrete un-reinforced in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L providing cement concrete 1:2:4, Type B1 (using 20mm graded stone aggregate) as in surface channels of drains complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint over a one coat of red oxide primer including writting letter or drg, signs of any size and in any colour etc complete all as specified and directed
M&L providing cement concrete 1:2:4, Type B0 (using 12.5mm graded stone aggregate) in copings, kneelers, apex stones, bed plates, kerbs, water troughs, surface channels and the likes; including weathering, slightly rounded or chamfered angles and throating with and including necessary formwork etc complete all as specified and as directed.
Demolition of brick masonry work built in CM including all square, arches, pillars etc but excluding ashlars facing dressed stone work and pre-cast concrete articles etc complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks ,straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
S&F Expanded metal/hard drawn steel wire febric of weight exceeding 4 Kg /sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.
Cutting edges and sides of brick or concrete surfaces with electric cutter so as to make the sides truly vertical and flat truly levelled for the purpose of fixing of MS grill MS perimeter channel of any size and description complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall,fixed with self tapping screws etc complete as specified and directed.
M&L for brick work with sub class 'B' bricks , (old size bricks) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for Plate girder or single stanchions,built up of one beam or channel section with flange plates,caps bases,splices,angle brackets,cleats and other connections, conforming to Fe 410 W (Gde E-250) quality A complete all as specified and directed
S&F for Bands,straps,supports or stays for rainwater, wind ties for roof including securing bolts, if required: hooks (stay), plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and directed.
Material and Labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and finishing wall surface with premium acrllic smooth exterior paint with silicon additives of approved shade in two coat applied @ 1.43 lt / 10 Sqm. over and including priming coat of exterior paint applied @ 2.20 kg / 10 Sqm in normal / camouflage pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered surfaces of wall by complete removal and finishing wall surface with premium acrllic smooth exterior paint with silicon additives of approved shade in two coat applied @ 1.43 lt / 10 Sqm. over and including priming coat of exterior paint applied @ 2.20 kg / 10 Sqm in normal / camouflage pattern etc complete all specified and directed .
M&L for cement concrete type C-2 1:3:6,(40mm graded stone aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L for steel rolling shutters,with ball bearing,1.25 mm thickness of lath,including top cover,anchor rod, hasp and staple and one shop coat of primer,erected in position as indicated, manual type complete all as specified and directed
M&L for PCC 1:3:6, type C-1 (using 40mm graded stone aggregate) as in bed blocks for hold fast incl necessary form work etc complete all as specified and directed.
M&L for hardcore of gauge n.exc 63mm,deposited,spread and levelled in layers n.exc 15 cm thickness,watered and rammed to a true surface of broken stone complete all as specified and directed.
M&L for Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil etc complete all as specified and directed.
M&L for 100mm PCC 1:4:8 type D2 using 40mm graded stone aggregate as sub base of floor etc complete all as specified and directed.
M&L for precast concrete interlocking paver block of approved shape and size of 50 to 60 mm thickness using grey cement and pigment , with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface complete all as specified and as directed
M&L for prepartion of new steel surfaces of any description over 10 cm in width of grith and applying two coats of synthetic enamel paint over a coat of red-oxide primer etc complete all as specified and directed.
M&L for preparation of old decorated steel surfaces of any description over 10cm width or grith and applying one coat of synthetic enamel paint etc complete all as specified and directed
M&L PCC coping 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) mud stops,rounded or chamfered on edges complete all as specified and directed.
M&L for framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iton doors, ladders; framed balusters, walk ways, rallings, framework of water tanks and similar work con-forming to Fe.290. Gde-E-165 complete all as specified and directedd.
Taking down old U/S Submersible pump set/VT pump set upto 20 HP capacity and deposited to MES store all as specified and directed.
Taking down old U/S Centrifugal motor pump set upto 60HP capacity and deposited to MES store all as specified and directed.
Supply, installation, commissioning and testing of Submersible pump, electric driven 415 V, three phase suitable for 150 mm dia bore well ( Casing pipe size 150 mm) of 15 HP capacity, 09 stage, outlet size 80 mm, 81-50 mtr head, 550-870 LPM complete all as specified and directed. Make-Crompton (Model no- 150W9F15)/Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of Submersible pump, electric driven 415 V, three phase suitable for 150 mm dia bore well ( Casing pipe size 150 mm) of 12.5 HP capacity, 08 stage, outlet size 80 mm, 72-44 mtr head, 550-870 LPM complete all as specified and directed Make-Crompton (Model no- 150W8F12.5) /Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of Submersible pump, electric driven 415 V, three phase suitable for 150 mm dia bore well ( Casing pipe size 150 mm) of 7.5 HP capacity, 05 stage, outlet size 75 mm, 46-16 mtr head, 480-960 LPM complete all as specified and directed Make-Crompton (Model no- 150W5F7.5 S/D) /Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of Submersible pump, electric driven 415 V, three phase suitable for 150 mm dia bore well ( Casing pipe size 150 mm) of 05 HP capacity, 03 stage, outlet size 80 mm, 27-17 mtr head, 550-870 LPM complete all as specified and directed Make-Crompton (Model no- 150W3F5) /Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of Submersible pump, electric driven 415 V, three phase suitable for 150 mm dia bore well ( Casing pipe size 150 mm) of 30 HP capacity, 18 stage, outlet size 75 mm, 166-66 mtr head, 480-960 LPM complete all as specified and directed Make-Crompton (Model no- 150W18F30)/Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of openwell monoblock submersible Pumping sets, electric driven, of 20 HP, gun metal impeller, mechanical seal, stainless steel shaft, pipe size 100x80 mm, 30-51 Head, 1850-800 LPM inclusive lowering of motor and pump in UG sump complete all as specified and directed Make-Crompton (Model no- OWR20.2) /Kirloskar/KSB or equivalent
Supply, installation, commissioning and testing of Pumping sets with and including 3 phase induction motor, centrifugal, self priming, electric driven, of 40 HP, gun metal impeller, mechanical seal, stainless steel shaft, suction pipe size 150mm and discharge pipe size 150 mm, 4500 LPM at 40 mtr head inclusive of PCC foundation type B1 1:2:4 (20 mm graded aggregate) of 2mtrx1.5 mtrx200mm size with MS channel ISMC-100 of 2 nos of 1.8mtr length for grouting with suitable size nut bolt for motor and pump complete all as specified and directed. Make-Kirloskar (model no- UP150/38A) /KSB / Crompton or equivalent
Supply, installation, commissioning and testing of Pumping sets with and including 3 phase induction motor, centrifugal, self priming, electric driven, of 60 HP, gun metal impeller, mechanical seal, stainless steel shaft, suction pipe size 200mm and discharge pipe size 150 mm, 4500 LPM at 40 mtr head inclusive of PCC foundation type B1 1:2:4 (20 mm graded aggregate) of 2mtrx1.5 mtrx200mm size with MS channel ISMC-100 of 2 nos of 1.8mtr length for grouting with suitable size nut bolt for motor and pump complete all as specified and directed. Make-Kirloskar (model no- UP150/38A) /KSB / Crompton or equivalent
S&F fully automatic star- delta starter of overload relay range 13.2-20 Amps of capacity suitable upto 15 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASAKLEN/LOR) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of relay range 8.9-13.5 Amps of capacity suitable upto 12.5 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASAKLEN) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 6.0-9.3 Amps of capacity suitable upto 7.5 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASAJLEN) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 3.8-6.0 Amps of capacity suitable upto 05 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASAHLEN) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 23.0-32.0 Amps of capacity suitable upto 30 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASAPLEN) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 13.2-20.0 Amps of capacity suitable upto 20 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASALLEN) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 24.4-39.0 Amps of capacity suitable upto 40 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASACT1LEDM) /L&T/Bentex / Siemens or eqivalent
S&F fully automatic star- delta starter of overload relay range 37.6-60.0 Amps of capacity suitable upto 60 HP motor, AC-3 phase heavy duty, 415 volts, 50 Hz including fixing arrangement on wall complete all as specified and directed. Make : BCH( model no:NASACT2LEEM) /L&T/Bentex / Siemens or eqivalent
Supply and laying or fixing or passing in borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor cable of size 4.0 sqmm 3 core flat including connection to motor/submersible motor/ starter panel with & including necessary jointing materials and testing complete all as specified and direced.
Supply and laying or fixing or passing in borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor cable of size 6.0 sqmm 3 core flat including connection to motor/submersible motor/ starter panel with & including necessary jointing materials and testing complete all as specified and direced.
Supply and laying or fixing or passing in borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor cable of size 10.0 sqmm 3 core flat including connection to motor/submersible motor/ starter panel with & including necessary jointing materials and testing complete all as specified and direced.
Supply and laying or fixing or passing in UG sump 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor cable of size 16.0 sqmm 3 core flat including connection to motor/submersible motor/ starter panel with & including necessary jointing materials and testing complete all as specified and direced.
Supply and laying or fixing or passing in borewell/UG sump 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor cable of size 25.0 sqmm 3 core flat including connection to motor/submersible motor/ starter panel with & including necessary jointing materials and testing complete all as specified and direced.
Supply and fixing in replacement PVC insulated multistranded copper conductor cable of size 35 sqmm single core electric panel board with & including suitable lugs for connection complete all as directed.
Supply and laying PVC flexible pipe of size 50sqmm complete all as directed.
Supply and fixing in replacement PVC insulated multistranded copper conductor cable of size 50 sqmm single fixed in core electric panel board with & including suitable lugs for connection complete all as directed.
Supply and laying PVC flexible pipe of size 80sqmm etc complete all as directed.
Supply , installation and commissioning monoblock pump set of capacity 1.5 HP, inlet outlet size 25x25mm, 3000 RPM, 24-54 mtr head, 5200-1800 LPM including all necessary fixing arrangement complete all as specified and directed.Make-Crompton (model no- mini xtraa)/Kirloskar/KSB or equivalent
M&L for earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level with earthing lead of GI Strip 32x6 mm surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized GI Strip 32x6 mm size by means of bolts, nuts check nuts and washers. steel and earth wire protected by Gl protection pipe light grade 40mm dia connected to main earth wire on pole or control board and Gl pipe medium grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1, 40mm thick Precast RCC M-25 cover reinforced with 8 mm dia TMT bars. @10 CM C/C on both sides and handle, excavation and earth work in any type of soil and removal up to 50m complete all as specified and shown in electric plate no.3 SSR part –I (2009), connecting to Earthing test point all as directed including testing on completion. Note- Above qouted rate shall be deemed included of GI earth strip upto 7.5 mtr above GL.
Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line and getting out complete all as specified and as directed.
Returning & filling in and including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.
Removal of surplus excavated soil to a distance n. exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
Supply & laying of best locally available bricks sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and as directed.
M&L for sand coushioning with clean dry fine sand unwashed including gently punning around cable in trenches for cable protection and filling the sand in cable duct, inside the sub station building complete all as specified and as directed. Note:- Punned thickness of sand shall be measured and paid for sand used in cushioning to cable.
Supply, laying, testing of cable XLPE insulated, armoured heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4.0 core complete all as directed.
Supply, laying, testing of cable XLPE insulated, armoured heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as directed.
S & F MCCB 100 Amps, 16KA , 4 pole with thermal magnetic release with sheet metal enclosure with all accesssories complete all as specified and directed .
M & L for Demolition of PCC/Black bitumin road of any description and in any position not otherwise specially provided , etc complete all as specified and directed.
M&L for PCC type B2 (1:2:4) using 40 mm gradded stone aggregate for foundation filling and mass concrete, complete all as specified and as directed.
M&L for Copper bus bar chamber with 4 nos copper busbar of capacity 100 Amps with all fixing arrangements complete all as specified and directed.
Supply and fixing of GI tubing 'light grade' of 50 mm bore for cable protection fixed on pole/wall/floor/or laid in trenches and drain etc complete with necessary MS clamp, nut, bolts and washers and socket complete all as specified and directed.
Supply and install testing and commissioning hi wall split units indoor and outdoor EER 3.2.of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality minimum 4 star rating inverter type and EER 3.2. complete all as specified and directed.
S&F sheet metal enclosures with MCB protected suitable for AC including socket plug top and MCB single pole with a two pin and earth plug and socket complete 20 Amp MCB ,240 volts making good disturbed surfaces to match with existing surfaces etc complete all as directed. Make Havells model No DBOXx MCB Protected or equiralent of Legrand / Indo Asian
M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 2X4.0 sqmm (+) 1 x 4.00 sqm for earth wire drawn in and including PVC conduit ISI marked not less than 25mm width with its accessories complete all as specified & directed.
Taking down & shifting of existing split type air conditioner of capacity 1.5/2.0TR to new location as directed including re-installation/ re-fixing the same at new location i.e outdoor and indoor units at new locations and making all necessary electric/ charging pipe line connections, commissioning and testing on completion and making good the disturbed surfaces of wall/ floor as per existing complete all as specified and directed.
Supply and fill gas R-22 for recharge of split type AC complete all as specified and directed.
Supply and fix, 1/4” dia copper tube suitable for split ACs of capacity 1.5/ 2.0TR including cutting, jointing and soldering etc including insulation material and drainage pipe around the tube complete all as specified and directed.
Supply and fix, 5/8” dia copper tube suitable for split ACs of capacity 1.5/ 2.0TR including cutting, jointing and soldering etc including insulation material and drainage pipe around the tube complete all as specified and directed.
Supply and fix, Outdoor unit stand of split AC compete all as specified and directed.
Supply and fix 1100 volts grade heavy duty cable with PVC insulated multi stranded copper conductor cable of size 2.5 Sqm 4 core served with an inner sheathing of PVC tape armoured with glavanised steel wire or tape and over all PVC sheatherd etc complete all specified and ditected
rohan traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .