CERTAIN REPAIR/MAINT TO FALSE CEILLING, WALL PANELLING, ROOFING ETC AND OTHER CONNECTED B/R WORKS IN TECH AREA OF 663 ARMY AVN SQN UNDER AGE (I) CIF (K)

Amount

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed by the Engineer-in-Charge.

GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including 4mm thick non asbestos fibre cement building boards fitted or laid/inserted to timber/GI frame work complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling supplied & fixed with nails in any situation, Planed one side and edges tongued and grooved or rebated, fixed in any situation over 12mm thick plyboard runner including french polishing on exposed surface of any description including cleaning and preparing the surface a coat of wooden filler upto satisfaction of the Engineer-in-Charge.

Dismantling timber scantling under 40 sq. cm in section in fillets, rails, posts, rafters, purlins, etc., unframed work, complete all as specified and as directed by the Engineer-in-Charge.

Plain fillets. square, rectangular or triangular in section, made of 2nd class soft wood (Kail), wrought, secured with nails or brads, sectional area exceeding 13sqcm but not exceeding 25 sqcm, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by the Engineer-in-Charge.

S & F steel works as in tubler section for post, purline etc including special shape washer, angle cleat, hold fast, gussete plate etc. complete using ERW or induction butt welded tubes conformimg to IS 1161-1979 grade St-240 cut or notched forming holes,without any attachment including drilling,fittings,riveting and or welding or connecting with bolts ans nuts ( incl rivet or nut ams bolt) providing and fitting angle cleats gussete plates etc also for welding plumbing truing up and fixing complete all as specified and directed by the Engineer-in-Charge.

Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified as directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.

Anodised aluminium frame (powder coated minimum thickness of powder coating 50 micron) for doors, windows,partation wall, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and asdirected by Engineer-in-Charge.

Anodised aluminium (powder coated minimum thickness of powder coating 50 micron) door shutters, powder coated of any colour aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading screws etc. frame will be fixed to wall , complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium (powder coated minimum thickness of powder coating 50 micron)window and ventilator shutters, powder coated of any colour sliding/ hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.), complete all as specified and directed by the Engineer-in-Charge.

Mortice lock, vertical type 4 levers,, size 100 mm, complete all as specified and directed by the Engineer-in-Charge.

Prelaminated particle board, 12 mm thick, interior grade, prelaminated on boat side with decorative choice lamination and fixed with screws to aluminum frame work, complete all as specified and as directed by the Engineer-in-Charge.

Tinted sheet glass, 4 mm thick glazing with in alm frames including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings as required, complete all as specified and as directed by the Engineer-in-Charge.

Door closer hydraulically regulated, designation No. 2, universal type, uitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Note :- An amount of Rs 63,760.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S A.M. ENTERPRISES

M/S SHIMAR STAR GLACIER

M/S M.S. BUILDERS

M/S Thakur & Sons