SPECIAL REPAIR TO BLDG NO T-60( JCOS LIVING), T-66 (OFFRS LIVING), T-92 ( OR LIVING) OF FD HOSP AT HUNDER AND T-40 (COOK HOUSE) UNDER GE 873 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified & directed.

Taking down shutters of any description n.exc 1.00 sqm and removing from site all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in sub-base/under flooring complete all as specified and directed.

M&L for Dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matcht and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer of cement mortar 1:4, and pointed in white or coloured cement to match complete all as specified and directed.

M&L for machine cut kota stone slab 20 to 25 mm thick as in flooring / stair case landing, laid over & incl. 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

S&F Roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam, tee, angle, channel or flat sections) conforming to Fe-290 Gde E-165 all as specified and directed.

S&F for wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Galvanised MS sheeting of 0.63 mm thick corrugated with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275 all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per above item but single (one) coat on old steel surfaces including preparation.

M&L Preparatoion of new steel surface n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and directed.

Dismantling timber in fillets, rails,post,rafters purlins etc under 40 sq cm in section complete all as specified and directed.

M&L for plain fillet 2nd class Hard wood section are exc 13 cm but n exc 25 cm in square,rectangular or triangular in section, clean sawn, secure with nail or brads complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated complete all as specified and directed.

S&F 25 mm thick Flush shutters, solid coreconstruction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 25 mm thick IInd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain, chemfered fitted with cut and mitred beads for securing glass, etc fitted to chowkat complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board,in wall interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed in wall with nail to timber frame work complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,in ceiling fixed with nail to timber frame work complete all as specified and directed.

M&L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete all as specified and directed.

All as per above item but single (one) coat on old wooden surfaces incl preparation.

Hacking out old broken glass (any thickness, size, quality or description) from steel or wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified & directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beeding in square n. exc 0.5 sqm each panes complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 75mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm aluminium handles, cast type, anodised and pattern/design as approved complete all as specified and directed.

S&F 75mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified and directed.

S&F for 100mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed

S&F for 75mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F PVC magnet cather fixed with screws to wooden frames complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry/ PCC block masonary, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (1:2:4), Type B1 with using 20mm graded stone aggregate (with plain or interlocking joints as directed) setting in mortar (1:4) , complete, in walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick back coat in cement mortar 1:3 complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store all as directed.

S&F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete, all as specified & directed.

S&F 75mm dia, Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specefied and directed.

S&F for 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and fixed in repair.

S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed.

S&F 32mm bore waste pipe for WHB complete all as specified & directed.

S&F in repair brass chromium plated tubular towel rail , 20mm dia in repair complete all as specified & directed

S&F Bib taps chromium plated, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified.

S&F in repairs 15mm Stop valves / Angle valve, fancy type CP, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed.

S&F in repair replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for wash basin complete all as specified.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.

S&F in repair PVC (SWR) bend 110mm bore of any redius complete all as specified & directed.

S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm all as specified & directed.

S&F in repair chromium plated (CP) Towel Ring fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Dismantling water tanks of capacity exc 500 ltrs & n.exc 1000 Ltrs and removing to store all as directed.

S&F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform, complete all as specified and directed.

S&F in repair curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm, PVC coated and colour /pattern, over all dia 28 to 29 mm complete all as specified and directed.

S&F plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed

S&F mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed.

Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each complete all as directed.

Taking down chowkhat or door frames including shutters n exc 1.5 sqm each complete all as directed.

Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition) all as directed.

M&L Precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and set in cm 1:6, complete all as specified and directed.

M&Lfor 15mm thick rendering on external wall of brick work or concrete surfaces in cement mortar 1:4, finsihed the surfaces even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specified and directed.

M&L for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint, complete all as specified and directed.

M&L for prepartion of old treated wall surfaces of any description applying one coat of cement base paint complete all as specified and directed.

M&L for prepration of newly plastered or pointed surface of walls and applying three coat of white wash on wall complete all as specified and directed.

M&L for one coat of white washing and prepartion of old treated wall surfaces complete all as specified and directed.

M&L granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for reinforced Cement Concrete 1:2:4, type B1 (nominal mix ) (using 20 mm graded stone aggregate) in in shelves and the like etc complete all as specified and directed.

M&L for Use and waste rough finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed.

M&L for Use and waste rough finished Form work to edges of concrete floor and roofs and similar work exceeding 5 Cm but not exceeding 10 Cm wide complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and directed.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and directed.

S&F steel windows/ ventilator with side hung shutters incl box type hing with glazing bars and steel peg stay. Each window shutter is to be fitted with 1 steel handle 100mm long casted out of MS Z section and two number of mild steel barrel tower bolts 150mm long on suitable size MS flat complete all as specified and directed.

Ditto all as per item herein above but without glazing bars

S&F for 18/19mm thickness Block boards, grade-2 quality, interior grade, decorative typewith decorative face veneer on one face complete all as specified and directed.

M&L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

All as per above item in before but fixed in repair.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and directed.

S&F mild steel 300mm helical door spring , ordinary rat tail rod patteren including roller and roller plate complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (minimum weight 32mm 45gms) complete all as specified and directed.

Demolition and breaking up drain pipes/pipe fixed to wall (PVC, Salt glazed ware, AC or re-inforced concrete) set in cement mortar bore of pipe 100mm all as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs Brass CP Sink mixer (15mm dia bore pipe) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down of MCB DB/TPN any type including MCB SP/SPN and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

(a) One light point/ Exhaust fan controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

All as per item No 99 above but for one 3 pin socket outlet 15 Amps independent with cable of size 2.5 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and directed.

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F socket outlet 2 in 1, 5 Amps, 1 flush type complete all as specified and directed.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) sutable for 2 pin/3 pin plug complete all as specified and directed .

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Rechargeable LED Bulb energy saver 9 W, B22(220-240 V) 50 hz, 6500k fast charging 2200mAH battery including, white color all as specified and as directed. Make:- CG/Phillips/Havells

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x10W bulkhead, 220 Volts and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve 40-63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

Exhaust fan with louvers of size 250mm sweep, 900 RPM, 230 volts (single phase) plastic type complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed

Deduct Schedule of Credit of Rs (-) 93,387.50 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S ASGAR ALI TIMBER SHOP

THINLES OTZER

M/S GEE AAR and SONS ENTERPRISES

M/S HONY CAPT RIGZIN SAMPHEL

KHUSHBU TRADERS

M/S MUNEER HASSAN AKHON

M/S MA CONSTRUCTION Co