NAMAKKAL CITY MUNICIPAL CORPORATION-Providing partition arrangements and cabins in Mayor room, Deputy Mayor room and Commissioner room at Trichengode road office building

Amount

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying and fixing of file rack the Materials Used for - 6mm,9mm,12mm,18mm ISI Branded Plywoods,Laminate Sheets, Teak Beadings, Paints, Primers, Polish, Fevicol Synthetic Adhesive and Hardware’s Such as Ebco Telescopes, Locks, Handles, Hinges, Nails, Screws, Etc., i)2 Coats of Wooden Primer after 2 Coats of Wooden Patti and Finished with 2 Coats of Don Color Paints. ii)Using polish for imported Teak wood beadings.

Supply and delivery of Executive table of size 4' x 2' using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed top of the table using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supply and delivery of S type chair with teak wood hand rest and made of circular MS pipe and wired back rest and seating etc., as directed by the Departmental Officers. The design pattern and other materials should be got approved from the Executive Engineer befoe use on work.

Supply and delivery of wire revolving chair with wheel arrangements for easy moving and wired back rest and seating etc., as directed by the Departmental Officers. The design pattern and other materials should be got approved from the Executive Engineer befoe use on work. - Revolving chair

Revolving chair

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.

Supply and delivery of Executive office table model no.605 chair with wheel arrangements for easy moving etc., as directed by the Departmental Officers. The design pattern and other materials should be got approved from the Executive Engineer befoe use on work.

Supply, delivery and fixing of Window curtains with roller blinds with pelmet contains with suitable colour as directed by the departmental officers etc.., complete.

Supply, delivery and fixing of Wallpapers for walls contains (50 Sq.ft size) with suitable design and colour aproved and instructed by the departmental officers etc.., complete.

Supply, delivery and laying of floor matt for slippery portions contains with suitable design, colour aproved and instructed by the departmental officers etc.., complete.

Varsha Group of Construction (BID ID -1160426)