Construction of Admin Block and Library Hall, Lecture Hall and Hockey Astrotruf Stadium at SUS Govt College Sunam Distt Sangrur (Electrical Services)

ADMIN BLOCK AND LIBRARY HALL

Cost of 1 no's 13 Passenger (G+2) Lift's Type and Capacity : Approximately 884 Kg( Deep) , 13 Passengers Lift without Machine Room Speed: 1.0 Meter per second Type of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor. Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist way Travel: Approximately 9 Meter (Ground to Second Floor) Serving: 3 Floors 3 Stops 3 Openings 3 Levels (All on the same side) Hoist way : 2050mm (Wide) x 2500mm (Deep) Clear dimensions Headroom Height (HR): 5000mm beyond finished floor level of last landing Pit Depth : 1600mm below the finish floor level of first landing Car Size Area: Minimum 2.06 square meter & Maximum 2.20 square meter Car Enclosure : Constructed out of stainless steel finish panel in Scratch Resistance/ Vandal proof Car Entrance: Center Opening Automatic Doors with vision panel of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 800/900mm (wide) x 2000mm (high), fire retardant doors upto 2 hrs

Other Features : 1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons 5. Door Open and Close buttons 6. Emergency Intercom provided inside the elevator 7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication 9. Steel items, door frames sill angle's, fascia plates, spring buffers 10. Automatic phase reversal device and Phase Failure protection 11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock

15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance / exit is either Open or Close. 19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel 21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection 26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.

28.The use of visually and acoustically reflective wall surfaces should be minimized within the lift car as visual reflections can cause discomfort and affect the visual acuity of people with impaiments. 29. The Floor of the lift car should be slip resistant and have similar frictional qualitites to the floor of the lift landing to decrease the risk of stumbling 30. The Provision of a mirror on the wall of the lift car opposite the lift door is a postive aid to navigation for wheelchair users, Its allows the wheelcahir user to see if anyone is behind them and also to see the Floor indicatior panel. The mirror should not extend below 900mm from the lift door to avoid confusing people with impaired sight. 31.The emergency communication system should be coupled with and induction loop system installed all around the lift. Telephone units. where provided, should have an inbulit inductive coupler to aiist person using hearing aids. 13 passenger lift to be provided, which allows easy maneuverability of wheelchair user.

Cost of LAN Networking

SITC of 24 Port L2 managed 10/100/1000 Mbps Data switch with 4 No Uplinks RJ45 and SFP Combo 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy-Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), • IEEE 802.3af • IEEE 802.3at . CPU RAM 256MB or above Certification - FCC class A, CE class A, VCCI, BSMI, CCC, CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F).complete in all respect as desired by Engineer Incharge

Supply, installation, testing and commissioning of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination, ID Plate PC transparent color with paper, Panel: SPCC,1.5mm thickness with black color painted, RJ45 Jack- Housing: P B T + g la ss fiber, UL-94V-0 Contact Brackets: PBT + glass fiber, UL-94V-0, RJ45 Jack Contact- Material: Phosphor bronze with nickel plated Finish: 50 micro-inches Gold plated on plug contact area, IDC Housing: PC, UL 94V-0 Terminal: phosphor bronze with tin plated, e ANSI/TIA/EIA 568C.2 & ISO/IEC 11801 standard..Complete in all respect to the entire satisfaction of the engineer-in-charge

Supply of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0 Complete in all respect to the entire satisfaction of the engineer-in-charge

Supply & erection of 12U Wall mount 19’’ Rack with glass door,lock & key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks. complete in all respect as desired by the engineer in charge at site.

SITC of CAT6 UTP Networking Cable UL Listed of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site.

SITC of 6 Core Optical Fiber Cable Unitube Double Jacket Fiber Optic Cables Steel tape armor and PE jacket provide rodent protection along with improved crush and impact protection, Water blocking tape & Water blocking yarns over FRP, Working Temperature –40°C ~+60°C Speed 10 Gbps .Complete in all respect to the entire satisfaction of the engineer-in-charge

SITC of 1G SFP Module Support up-to 10KM compatible with All core switches and Access switches , LC type Connector Metal Casing , Wave1310nm, Single Mode Fiber, Transmit and Receive Wavelength (nm) -1260 to 1355 length, Power consumption 1 Watt, Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Complete in all respect to the entire satisfaction of the engineer-in-charge

Supply of Fiber Pig tail LC/SC type connector Single Mode-G.652D, Working Temperature –40°C ~+85°C, Mechanical 0.9mm 10GBPS Speed, Insertion Loss-Typical:<0.2dB, Max. 0.3dB (MTRJ: Max. 0.5dB) , Return Loss- PC>_45dB, UPC>_50dB,APC>_60dB (SM). Complete in all respect to the entire satisfaction of the engineer-in-charge

SITC of 6 Ports LIU Features: - • Aluminium base material for light mounting. Slim 1 unit mounting height Front mounted cable saddles for jumper management. Can manage both splices and terminations. • Pre assembled shelves in multiple configurations. • Can include adapter panel for maximum 48 LC, 24 SC, 24 ST or 24 FC terminations. Rubber fiber slotted bracket building, metal surplice self to protect.2 fiber spools built in for 900 um tight buffered fibers per adapter. Snap in locker design, easy to change adapter panels for various connector patching. Removable front & rear covers for better access to interior of LIU. Removal rubber from grommet allows for pre terminated fiber trunk installation, protects cable &minimize dust ,build-up. Accessory kit consists of cable ties mounting ear screws & spiral wrap tube complete in all respect as per site Requirement.

Cost of CCTV Surveillance System

Supply & erection of IP Dome Fix Lens CAMERA 5MP IP Camera with Audio Input Support and following features:- Imaging Device 1/2.7",Effective Pixels 5MP 2592(H)×1944(V),Scanning System Progressive CMOS ,Min. Illumination Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux @ IR ON, Focal Length (Zoom Ratio) 3.6mm, Max. Aperture Ratio F No. 1.6, Lens Type -Fixed(M12), IR Viewable Length Up to - 30m, Camera Title-On/Off,Day & Night IR cutter with auto switch (Day/Night/Auto/Image/Schedule) Backlight Compensation-Off/On (5 Zone), Wide Dynamic Range True WDR, Angular Field of View-Horizontal: 79°, Vertical: 56°, Diagonal: 106°,Digital Noise Reduction- 3D DNR, Motion Detection -Off/On (8 Level), Privacy Masking Off/On (4 Zone, Rectangle), Gain Control Auto, white Balance -Auto/Manual, Electronic Shutter Speed 1/5 ~ 1/20000s, On-Board Storage Micro SD slot - up to 256GB, Audio -Built-in microphone, Hardware Reset -Yes, Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC),

Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD), Rare Sound Detection (RSD), Video Quality Adjustment-256Kbps ~ 8Mbps, Bitrate control method CBR/VBR, Streaming Capability- Triple Stream (Main/Sub/Third), Protocol-TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, Web browser IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Security-IP address filter; complicated password; Authenticated username and password Streaming Method Unicast/Multicast, Application Programming Interface - ONVIF( Profile S/G/T), Ethernet- RJ45(10/100BASE-T), Video Compression Format-H.265+/H.265/H.264, Resolution- Main Stream @30fps 5MP (2592x1944), 4MP (2592x1520), 3MP (2304x1296), 1080P (1920x1080), 960P (1280*960),Sub Stream @30fps 1080P (1920x1080), 720P (1280x720), VGA (640x480),Third Stream @30fps,VGA (640x480), QVGA (320x240), Input Voltage / Current -D12V/POE(IEEE802.3af) Power Consumption (IR OFF) 3.5W,(IR ON) -6W, Material-Metal, Operating Conditions -35~+60°C/ less than ≤ 95% RH, Ingress Protection-IP 67 complete in all respect as desired by the engineer in charge at site.

Supply & erection of IP Dome Fix Lens CAMERA 5MP IP Camera with Audio Input Support and following features:- Imaging Device 1/2.7",Effective Pixels 5MP 2592(H)×1944(V),Scanning System Progressive CMOS ,Min. Illumination Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux @ IR ON, Focal Length (Zoom Ratio) 3.6mm, Max. Aperture Ratio F No. 1.6, Lens Type -Fixed(M12), IR Viewable Length Up to - 30m, Camera Title-On/Off,Day & Night IR cutter with auto switch (Day/Night/Auto/Image/Schedule) Backlight Compensation-Off/On (5 Zone), Wide Dynamic Range True WDR, Angular Field of View-Horizontal: 79°, Vertical: 56°, Diagonal: 106°,Digital Noise Reduction- 3D DNR, Motion Detection -Off/On (8 Level), Privacy Masking Off/On (4 Zone, Rectangle), Gain Control Auto, white Balance -Auto/Manual, Electronic Shutter Speed 1/5 ~ 1/20000s, On-Board Storage Micro SD slot - up to 256GB, Audio -Built-in microphone, Hardware Reset -Yes, Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC),

Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD), Rare Sound Detection (RSD), Video Quality Adjustment-256Kbps ~ 8Mbps, Bitrate control method CBR/VBR, Streaming Capability- Triple Stream (Main/Sub/Third), Protocol-TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, Web browser IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Security-IP address filter; complicated password; Authenticated username and password Streaming Method Unicast/Multicast, Application Programming Interface - ONVIF( Profile S/G/T), Ethernet- RJ45(10/100BASE-T), Video Compression Format-H.265+/H.265/H.264, Resolution- Main Stream @30fps 5MP (2592x1944), 4MP (2592x1520), 3MP (2304x1296), 1080P (1920x1080), 960P (1280*960),Sub Stream @30fps 1080P (1920x1080), 720P (1280x720), VGA (640x480),Third Stream @30fps,VGA (640x480), QVGA (320x240), Input Voltage / Current -D12V/POE(IEEE802.3af) Power Consumption (IR OFF) 3.5W,(IR ON) -6W, Material-Metal, Operating Conditions -35~+60°C/ less than ≤ 95% RH, Ingress Protection-IP 67 complete in all respect as desired by the engineer in charge at site.

SUPPLY & ERECTION OF 32 Channel IP INPUT 12MP NVR 4K with 4 SATA having following features:- Up to 16 Channel Input, 4 Sata Interfaces, Up To 12TB each, H.265+/H.265/H.264 Video Formats, 2 HDMI Port,1 VGA, USB3.0*1, USB2.0*2 Support,2×RJ45 Self-adaptive 10/100/1000 Mbps Network Interfaces, Supports live view, storage and playback of the connected camera at up to 12MP resolution, Connectable to the Third Party Network Cameras, Incoming Bandwidth -320M, Outgoing Bandwidth-320M, Recording Resolution-12 MP/8 MP/5 MP/4 MP/3 MP/1080p/720p, Recording Compression, Audio: G.711a,G.711u, Video : H.264/H.265, H.264+/H.265+, Speed -12MP:30fps 8MP:120fps 4MP:240fps 2MP:480fps, Playback- 1080P:480fps Max 16CH,

WEB -IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Protocols-TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, UPnP, HTTP, HTTPS, API -Onvif (profile S/G/T), VGA- 1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080 ), HDMI -1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080, 2560*1440(2K), 3840*2160(4K)) 1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080 /EDID) Async out, Ethernet-2 RJ45 100/1000 Base-T USB USB2.0*1(front), USB3.0*1 USB 2.0 *1 (rear), Audio-1 in / 1 out, E-sata-1 ,HDD 4, each up to 12TB, RS 485-1, Alarm Input/out -16 in /1 out, OSD LanguageEnglish, Input Voltage/ Current 12V/5A, Power consumption (excluding hard disk) -8W, Operating Temperature/Humidity-Temperature :-10°C~+50°C (14°F ~ 122°F) Humidity : Less than 90%RH complete in all respect as desired by the engineer in charge at site.

SUPPLY & ERECTION of 8000GB Audio Video HDD 3.5 Inches Connector SATA, Interface SATA, Operating Temperature 0°C to 65°C, Transfer Rate minimum 160MB/s, Recording Technology – CMR, Certifications BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL for NVR recording and playback complete in all respect as desired by the engineer in charge at site

Supply & erection of Smart 43” LED Commercial Panel /Regular with 2 HDMI Port, TV Input, 3 Years Warranty, 2 HDMI Port, TV Input, 3 Years Warranty, Resolution 4K, Brightness 300 cd/m2 Support 4K Ultra HD 20 Watt 2.0 Audio Output Web Browser Soft AP, WiFi (bandwidth) Screen Share (Miracast) Plus App USB Cloning, 2 No. Of HDMI Port 2 no USB Port complete in all respect as desired by the engineer in charge at site.

SITC of 24 Port POE 360+ Watts L2 managed 10/100/1000 Mbps Data switch with with 4 No Uplinks RJ45 and SFP Combo 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy-Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), PoE Standards • IEEE 802.3af • IEEE 802.3at PoE-capable Ports • Ports 1 to 8 Power 60W • 360 W (30 W max. per PoE port). CPU RAM 256MB or above, Certification - FCC class A, CE class A, VCCI, BSMI, CCC, CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F). complete in all respect as desired by Engineer Incharge

SITC of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination, ID Plate PC transparent color with paper, Panel: SPCC,1.5mm thickness with black color painted, RJ45 Jack- Housing: P B T + g la ss fiber, UL-94V-0 Contact Brackets: PBT + glass fiber, UL-94V-0, RJ45 Jack Contact- Material: Phosphor bronze with nickel plated Finish: 50 micro-inches Gold plated on plug contact area, IDC Housing: PC, UL 94V-0 Terminal: phosphor bronze with tin plated, e ANSI/TIA/EIA 568C.2 & ISO/IEC 11801 standard.. complete in all respect as per site Requirement.

Supply of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0 complete in all respect as per site Requirement.

Supply of CAT 6 TWO Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0 complete in all respect as desired bty Engineer Incharge at site

Supply & erection of 10 meter long superior quality 4K HDMI Cable having speed upto 10gbps support all types of HDMI Devices complete in all respect as desired by the engineer in charge at site.

SITC of CAT6 UTP Networking Cable UL Listed of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site.

Cost of Projector

Supply Installation Testing and Commissioning of 1080p DLP Projector with following Specifications: Above 3000ANSI Lumens high Brightness, 1 billon colours upto 200 inch screen sizes, 16 ms low input lag,10watt chamber speaker dual HDMI cable 100 inch l comlete in all respect as desiredby incharge at site

UPS 20KVA

SITC of 20KVA/16000Watt Online UPS, 3 In : 3 out Phases with Required No. of SMF Batteries 12V Capacity (28Ah -100Ah) for minimum 60 Min Back up Pure Sine wave with following features DSP Technology with IGBT Based Inverter, Smart LCD Display for Real-time Information ,CVCF (Constant Voltage Constant Frequency) Operational Without Battery, Adjustable Battery Number , Immune to Reverse Phase Sequence & no Neutral Operation. OVCD Wide input range Programmable output range. Input - Nominal Voltage - 3x360v / 380vac 400vac(3ph+N) Acceptable Voltage Range - 285vac ~ 485vac Frequency Range -50hz~60hz+10%, Output - Nominal Voltage 3x380vac/ 400vac+1% (3ph+N), 415vac (Adjustable), Ac Voltage Regulation +1% (Battery Mode), Frequency Range, Mains Mode (Syncronized Range) : 50hz+1hz , Battery Mode : 50hz~0.1hz, Power Factor/Crest Factor 0.8/3.1, Total Harmonic Distortion <2% (Linear Load), <5% (Non-Linear Load),

Transfer Time -Ac To Dc Mode- Zero, Invertre To Bypass Mode Zero overload Capability-150% For 60sec, >160% For 200ms Wavefrom Battery Mode-Pure Sinewave Static Bypass Overload / Short-Circuit Capability-150% For 1 Hour; 180% For 30sec; >200% For 200ms Connection Type / Input Voltage Range Solid state / 3x380vac/400vac(3ph+N) Efficiency Ac Mode Efficiency 90% Battery Mode efficiency 89% Battery & Charger Recommeded Battery Type Lead Acid / Tubular / Smf, Default: 30n Os. (Battery Charging Current Default: 5a Maximum Usb And Modbus Rs-232/ Rs485-Supports Windows® 2000/2003/Xp/ Vista/2008/7/8, Linux And Mac Dry Contacts / Snmp (Optional)-6 Output And 2 Input / Power Management Form Snmp Manager And Web Browser, Environment - Operating Temp. / Humidity / Noise Leval,Temp: 0~55*C / Humidity: 0~90% (N On-Condensing) Equipment List – 1. UPS 2. 12V SMF Batteries of reputed make( Exide/Amaron) etc. as Required 3. MS Rack 4. Connecting Leads comlete in all respect as desiredby incharge at site

Cost of Security & Campus Lighting

PVC INSULATED FR COPPER CONDUCTOR CABLES:

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 3Core

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-

Overall size 10sq.mm (3Core) Un-armoured (On-Surface)

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-

SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 10 - 16sq.mm

Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.

Cost of On Grid Solar Power Generating System of 30 KW

Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 95KWp including required quantities of SPV modules (High power density Monocrystalline based single module iof capacity+400W) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Chemical copper bonded rods (i.e. 1 Nos. GI Structure, 2Nos. for String Inverter, AC & DC Distribution System)Provsion of Lighting arrester and 2 Nos. G.I. chemical earthing with copper bonded rods. Hot Dip Galvanized MS Mounting Structure be Designed to with stand the Speed for the Wind Zone of the Location(Rated Wind Speed 150-170Kph) Complete with transportaion, fabrication, labour & Civil Work.

Features:- 1. Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 1&2 IS/ IEC 61701 & IS/IEC 14286 & IEC 61215, BIS Certificates & MNRE, GOI latest specifications / Standards. 2. Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1,IEC / EN 62102-2 , EN 61000-6-2, EN61000-6-3, IEC61683, EN 50530 , IEC 60068-2-1,2,14,30,EN 60529, IES 60947 Part 1,2,3 IS 60947 Part 1&2 , IES 60227/IS 694,IES 60502/IS 1554 BIS Certificates & MNRE, GOI latest specifications / Standards. 3. Structure : 25 Years Service Life with AMC & Certified under IS 2062:2011 4. Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) 5. Annual Maintenance Contarct for the period of 5 Years Conditions:- 1. The Plant will be installed as per MNRE and GOI guidelines specifications.(Detail of Material as per Annxeure -1 Attached) 2. The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) Contractors.PWD enlisted contractor subject to condition that PWD Enlisted contractor will get work done from MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) approved Conractors. The Rates are inclusive of Bi-directional meter testing charges, PSPCL Connection Charges, Unidirectional meter cost and all type of taxes including GST

LECTURE HALL

Cost of LAN Networking

SITC of 24 Port L2 managed 10/100/1000 Mbps Data switch with 4 No Uplinks RJ45 and SFP Combo 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy-Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), • IEEE 802.3af • IEEE 802.3at . CPU RAM 256MB or above Certification - FCC class A, CE class A, VCCI, BSMI, CCC, CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F). Complete in all respect as desired by Engineer Incharge at site.

SITC of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination, ID Plate PC transparent color with paper, Panel: SPCC,1.5mm thickness with black color painted, RJ45 Jack- Housing: P B T + g la ss fiber, UL-94V-0 Contact Brackets: PBT + glass fiber, UL-94V-0, RJ45 Jack Contact- Material: Phosphor bronze with nickel plated Finish: 50 micro-inches Gold plated on plug contact area, IDC Housing: PC, UL 94V-0 Terminal: phosphor bronze with tin plated, e ANSI/TIA/EIA 568C.2 & ISO/IEC 11801 standard..Complete in all respect as desired by Engineer Incharge at site.

Supply of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0 Complete in all respect as desired by Engineer Incharge at site.

SITC of 12U Wall mount 19’’ Rack with glass door,lock & key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks. Complete in all respect as desired by Engineer Incharge at site.

SITC of CAT6 UTP Networking Cable UL Listed of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site.

SITC of 6 Core Optical Fiber Cable Unitube Double Jacket Fiber Optic Cables Steel tape armor and PE jacket provide rodent protection along with improved crush and impact protection, Water blocking tape & Water blocking yarns over FRP, Working Temperature –40°C ~+60°C Speed 10 Gbps Complete in all respect as desired by Engineer Incharge at site..

SITC of 1G SFP Module Support up-to 10KM compatible with All core switches and Access switches , LC type Connector Metal Casing , Wave1310nm, Single Mode Fiber, Transmit and Receive Wavelength (nm) -1260 to 1355 length, Power consumption 1 Watt, Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm.Complete in all respect as desired by Engineer Incharge at site.

Supply of Fiber Pig tail LC/SC type connector Single Mode-G.652D, Working Temperature –40°C ~+85°C, Mechanical 0.9mm 10GBPS Speed, Insertion Loss-Typical:<0.2dB, Max. 0.3dB (MTRJ: Max. 0.5dB) , Return Loss- PC>_45dB, UPC>_50dB,APC>_60dB (SM). Complete in all respect as desired by Engineer Incharge at site.

SITC of 6 Ports LIU Features: - • Aluminium base material for light mounting. Slim 1 unit mounting height Front mounted cable saddles for jumper management. Can manage both splices and terminations. • Pre assembled shelves in multiple configurations. • Can include adapter panel for maximum 48 LC, 24 SC, 24 ST or 24 FC terminations. Rubber fiber slotted bracket building, metal surplice self to protect.2 fiber spools built in for 900 um tight buffered fibers per adapter. Snap in locker design, easy to change adapter panels for various connector patching. Removable front & rear covers for better access to interior of LIU. Removal rubber from grommet allows for pre terminated fiber trunk installation, protects cable &minimize dust ,build-up. Accessory kit consists of cable ties mounting ear screws & spiral wrap tube Complete in all respect as desired by Engineer Incharge at site.

Supply & erection of 1KVA/800Watt 36VDC Online UPS with In- Built 3 No. Batteries Pure Sine wave with following features OVCD Wide input range Programmable output range 208V/220V/230V/240V 12V x 7Ah x 3 No. SMF batteries in-built Output Power Factor 0.9 0ms Transfer time from Inverter Mode to Battery Mode Charger Current 1.5 Amp Cooling Fan True Online Double Conversion Inbuilt Over-voltage Cut-off Device Inbuilt Over Temperature Protection Surge Protection Better Overload Protection upto 105% Constant Higher Efficiency up-to 92% in ECO Mode 2 year onsite warranty on UPS 30+ minutes Back up time on switches load complete in all respect as desired by the engineer in charge at site.

Cost of CCTV Surveillance System

Supply & erection of IP Dome Fix Lens CAMERA 5MP IP Camera with Audio Input Support and following features:- Imaging Device 1/2.7",Effective Pixels 5MP 2592(H)×1944(V),Scanning System Progressive CMOS ,Min. Illumination Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux @ IR ON, Focal Length (Zoom Ratio) 3.6mm, Max. Aperture Ratio F No. 1.6, Lens Type -Fixed(M12), IR Viewable Length Up to - 30m, Camera Title-On/Off,Day & Night IR cutter with auto switch (Day/Night/Auto/Image/Schedule) Backlight Compensation-Off/On (5 Zone), Wide Dynamic Range True WDR, Angular Field of View-Horizontal: 79°, Vertical: 56°, Diagonal: 106°,Digital Noise Reduction- 3D DNR, Motion Detection -Off/On (8 Level), Privacy Masking Off/On (4 Zone, Rectangle), Gain Control Auto, white Balance -Auto/Manual, Electronic Shutter Speed 1/5 ~ 1/20000s, On-Board Storage Micro SD slot - up to 256GB, Audio -Built-in microphone, Hardware Reset -Yes, Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC), Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD),

Rare Sound Detection (RSD), Video Quality Adjustment-256Kbps ~ 8Mbps, Bitrate control method CBR/VBR, Streaming Capability- Triple Stream (Main/Sub/Third), Protocol-TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, Web browser IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Security-IP address filter; complicated password; Authenticated username and password Streaming Method Unicast/Multicast, Application Programming Interface - ONVIF( Profile S/G/T), Ethernet- RJ45(10/100BASE-T), Video Compression Format-H.265+/H.265/H.264, Resolution- Main Stream @30fps 5MP (2592x1944), 4MP (2592x1520), 3MP (2304x1296), 1080P (1920x1080), 960P (1280*960),Sub Stream @30fps 1080P (1920x1080), 720P (1280x720), VGA (640x480),Third Stream @30fps,VGA (640x480), QVGA (320x240), Input Voltage / Current -D12V/POE(IEEE802.3af) Power Consumption (IR OFF) 3.5W,(IR ON) -6W, Material-Metal, Operating Conditions -35~+60°C/ less than ≤ 95% RH, Ingress Protection-IP 67 complete in all respect as desired by the engineer in charge at site.

Supply & erection of IP Dome Fix Lens CAMERA 5MP IP Camera with Audio Input Support and following features:- Imaging Device 1/2.7",Effective Pixels 5MP 2592(H)×1944(V),Scanning System Progressive CMOS ,Min. Illumination Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux @ IR ON, Focal Length (Zoom Ratio) 3.6mm, Max. Aperture Ratio F No. 1.6, Lens Type -Fixed(M12), IR Viewable Length Up to - 30m, Camera Title-On/Off,Day & Night IR cutter with auto switch (Day/Night/Auto/Image/Schedule) Backlight Compensation-Off/On (5 Zone), Wide Dynamic Range True WDR, Angular Field of View-Horizontal: 79°, Vertical: 56°, Diagonal: 106°,Digital Noise Reduction- 3D DNR, Motion Detection -Off/On (8 Level), Privacy Masking Off/On (4 Zone, Rectangle), Gain Control Auto, white Balance -Auto/Manual, Electronic Shutter Speed 1/5 ~ 1/20000s, On-Board Storage Micro SD slot - up to 256GB, Audio -Built-in microphone, Hardware Reset -Yes, Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC), Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD),

Rare Sound Detection (RSD), Video Quality Adjustment-256Kbps ~ 8Mbps, Bitrate control method CBR/VBR, Streaming Capability- Triple Stream (Main/Sub/Third), Protocol-TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, Web browser IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Security-IP address filter; complicated password; Authenticated username and password Streaming Method Unicast/Multicast, Application Programming Interface - ONVIF( Profile S/G/T), Ethernet- RJ45(10/100BASE-T), Video Compression Format-H.265+/H.265/H.264, Resolution- Main Stream @30fps 5MP (2592x1944), 4MP (2592x1520), 3MP (2304x1296), 1080P (1920x1080), 960P (1280*960),Sub Stream @30fps 1080P (1920x1080), 720P (1280x720), VGA (640x480),Third Stream @30fps,VGA (640x480), QVGA (320x240), Input Voltage / Current -D12V/POE(IEEE802.3af) Power Consumption (IR OFF) 3.5W,(IR ON) -6W, Material-Metal, Operating Conditions -35~+60°C/ less than ≤ 95% RH, Ingress Protection-IP 67 complete in all respect as desired by the engineer in charge at site.

SUPPLY & ERECTION OF 32 Channel IP INPUT 12MP NVR 4K with 4 SATA having following features:- Up to 16 Channel Input, 4 Sata Interfaces, Up To 12TB each, H.265+/H.265/H.264 Video Formats, 2 HDMI Port,1 VGA, USB3.0*1, USB2.0*2 Support,2×RJ45 Self-adaptive 10/100/1000 Mbps Network Interfaces, Supports live view, storage and playback of the connected camera at up to 12MP resolution, Connectable to the Third Party Network Cameras, Incoming Bandwidth -320M, Outgoing Bandwidth-320M, Recording Resolution-12 MP/8 MP/5 MP/4 MP/3 MP/1080p/720p, Recording Compression, Audio: G.711a,G.711u, Video : H.264/H.265, H.264+/H.265+, Speed -12MP:30fps 8MP:120fps 4MP:240fps 2MP:480fps, Playback- 1080P:480fps Max 16CH, WEB -IE10/11,

Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Protocols-TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, UPnP, HTTP, HTTPS, API -Onvif (profile S/G/T), VGA- 1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080 ), HDMI -1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080, 2560*1440(2K), 3840*2160(4K)) 1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080 /EDID) Async out, Ethernet-2 RJ45 100/1000 Base-T USB USB2.0*1(front), USB3.0*1 USB 2.0 *1 (rear), Audio-1 in / 1 out, E-sata-1 ,HDD 4, each up to 12TB, RS 485-1, Alarm Input/out -16 in /1 out, OSD LanguageEnglish, Input Voltage/ Current 12V/5A, Power consumption (excluding hard disk) -8W, Operating Temperature/Humidity-Temperature :-10°C~+50°C (14°F ~ 122°F) Humidity : Less than 90%RH complete in all respect as desired by the engineer in charge at site.

SUPPLY & ERECTION of 8000GB Audio Video HDD 3.5 Inches Connector SATA, Interface SATA, Operating Temperature 0°C to 65°C, Transfer Rate minimum 160MB/s, Recording Technology – CMR, Certifications BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL for NVR recording and playback complete in all respect as desired by the engineer in charge at site.

Supply & erection of Smart 43” LED Commercial Panel /Regular with 2 HDMI Port, TV Input, 3 Years Warranty, 2 HDMI Port, TV Input, 3 Years Warranty, Resolution 4K, Brightness 300 cd/m2 Support 4K Ultra HD 20 Watt 2.0 Audio Output Web Browser Soft AP, WiFi (bandwidth) Screen Share (Miracast) Plus App USB Cloning, 2 No. Of HDMI Port 2 no USB Port complete in all respect as desired by the engineer in charge at site.

SITC of 24 Port POE 360+ Watts L2 managed 10/100/1000 Mbps Data switch with with 4 No Uplinks RJ45 and SFP Combo 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy-Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), PoE Standards • IEEE 802.3af • IEEE 802.3at PoE-capable Ports • Ports 1 to 8 Power 60W • 360 W (30 W max. per PoE port). CPU RAM 256MB or above, Certification - FCC class A, CE class A, VCCI, BSMI, CCC, CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F).complete in all respect as desired by the engineer in charge at site.

SITC of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination, ID Plate PC transparent color with paper, Panel: SPCC,1.5mm thickness with black color painted, RJ45 Jack- Housing: P B T + g la ss fiber, UL-94V-0 Contact Brackets: PBT + glass fiber, UL-94V-0, RJ45 Jack Contact- Material: Phosphor bronze with nickel plated Finish: 50 micro-inches Gold plated on plug contact area, IDC Housing: PC, UL 94V-0 Terminal: phosphor bronze with tin plated, e ANSI/TIA/EIA 568C.2 & ISO/IEC 11801 standard..complete in all respect as desired by the engineer in charge at site.

Supply of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0 complete in all respect as desired by the engineer in charge at site.

Supply of CAT 6 TWO Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: 50U° Contact Blade: Copper Alloy Dielectric withstanding voltage: 1000V DC/min, 500M Ù, 1000V DC/min UL Applications: PC UL94-V-0complete in all respect as desired by the engineer in charge at site.

Supply & erection of 10 meter long superior quality 4K HDMI Cable having speed upto 10gbps support all types of HDMI Devices complete in all respect as desired by the engineer in charge at site.

SITC of CAT6 UTP Networking Cable UL Listed of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site.

Cost of Interactive Display Board

Supply Installation Testing and Commissioning of 65 inch Interactive Display Screen with following Specifications:Diagonal Size 65 inch, Type New Edge, 60Hz Resolution 3840*2160 (Landscape). Brightness(Typ.) 400 nit (without glass), 9H Tempered Glass Contrast Ratio 1200:1. Viewing Angle(H/V) 178/178 Speaker Type Built in Speaker (16W x 2CH) Video HDMI 3Nos USB 2(Rear/Front), 2.0/3.0 External(Front) Output :Video HDMI 1 (Screen Share in Front) Audio 1(Stereo Mini Jack) Memory 8GB, Android 11 Touch: Type IR # of Drawing 4 drawing (Internal) 20 touch (External) Touch Pen Type Passive Pen with magnet Object Recognition Range 2mm/ 4mm / 8mm / 50mm (Brush Mode : Dynamic Object Recognition). complete in all respect as desired by Engineer Incharge at site

SITC of 9U Wall mount 19’’ Rack with glass door,lock & key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks. complete in all respect as desired by Engineer incharge at site

Supply & Laying of Cable & Accessories::Speaker Cable 1.5 sqmm in PVC Conduit should be laid in existing PVC/HDPE pipe complete in all respect as desired by the engineer in charge.

Supply, Installation, Testing & Commissioning of OEM 20W Wall Mount Speaker with Frequency Response 200Hz - 15kHz, with Line Matching transformer 100V, SPL@1M - 82dB, Peak SPL 84dB. Complete in all respect to the entire satisfaction of the engineer-in-charge at site

Supply & Laying of Amplifier mic XLR cable 3 pin Complete in all respect to the entire satisfaction of the engineer-in-charge

Supply, Installation, Testing & Commissioning of Power Amplifier 100 Volt amplifer,Rated power 50W, 70V, 100V, Frequency Response 60-15KHz,S/N Ratio >= 70dB,THD <0.1% at 1KHz,4-16 ohm speaker outputs,Isolated transformer, Balanced XLR type line input and unbalanced phone jack line input, Balanced XLR type line output feeds to another power amplifer complete in all respect to the satisfaction of Engineer Incharge at site

SITC of Digital podium with Metal Body with Top Sliding Mechanism with Tray for Mouse /Keyboard with provision of Visualiser with a Sliding tray, Wheels for Eazy Movement. Rack Space for keeping Amplifier, CPU, Microphone receiver or more equipment.21.5 Inches Touch Screen Monitor. Monitor should be LED backlit with native resolution of 1920x1080 & with a USB port for PC Connection.Luminosity of 250 cd/m^2 or more, monitor should have a VGA, HDMI or DVI Input port. Total Mics with podium Goosenec Mic 1 Nos, 1 Nos wireless Handhedl Mic+ 1 Nos wireless Headworn Mic. PC configuration Intel core i5 with 256 SS harddrive with keyboard and mouse,8 GB RAM and Windows OS. VisualiserDocument Camera 20 Complete in all respect to the entire satisfaction of the engineer-in-charge

Cost of Security & Campus Lighting

PVC INSULATED FR COPPER CONDUCTOR CABLES:

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 3Core

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-

Overall size 10sq.mm (3Core) Un-armoured (On-Surface)

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-

SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 10 - 16sq.mm

Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.complete in all respect to the satisfaction of engineer Incharge at site

Cost Of DG Set 200 KVA

COPPER EARTHING (Upto 14 metre in Length):

Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-

Earthing with 25mm x 3mm Copper Tape (upto 14Metre in Length)

COPPER EARTHING STRIP (As Additional Length):

Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-

Additional Length 25mm x 3mm thick Copper Tape

Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 200KVA/160KW without AMF Panel, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV Norms upto date amendments) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.

ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication. ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled

Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use. ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.

MANUAL CONTROL PANEL: AMF control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site

Making of Cement concrete foundation of size 17' X 8' X 2'6" high for DG Set. The foundation start with Earth work in excavation 20' x 10' in foundations, Cement Concrete 1:5:10 with 40mm gauge stone agreegate mixing by mechanical means using concrete mixer volumetric type of size 20'x10'x0.75' , First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth size 17'x1.125'x 2' & 8'x1.125'x 2' , Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres sizes 16.75'x7.75'x2', Shuttering for faces of concrete foundations and foundations, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. sizes 18'x8'x0.5', Cold twisted deformed (Ribbed/for Steel Bar) Bar Fe 500 grade as per IS 1786-2008 and ost of shed included as Plinth size to cover DG with the material of Fiber/iron sheets, angle, Channels, or iron pipes complete in all respect as per site requirement and as desired by the Engineer in charge.

HOCKEY ASTROTRUF STADIUM

Providing HighMast Lighting in Hockey Ground

Supply and erection of Hot dip galvanised, polygonal high mast with Fixed Head Gear Frame suitable for mounting 20 Nos. of 500W LED Flood Lights as required. The height of the mast from base upto top of head frame shall be 25.0 Mtrs.( 20 mt high mast + 5 mt fixed head frame) The mast has been designed with Fixed Head Frame shaft shall be structurally suitable to accommodate the requisite flood lights asymmetrical Distribution. with 15 degree Angle and considering base wind speed as per IS 875. High Mast Should Support Manrider Unit Made up of Steel Frame with Special Designed winch with Safety Rope Feature and Power Tool with Auto/Manual Operation with Safe Load Capacity of 300KG with lifting Speed 9m/minute.The Manrider unit must have Security lock & overload protection switch. The Lift must decend if there is no power and magnetic brake would be applied immediately. There is no motor or winch shall be placed inside of the Mast. The Manrider system shall be independent unit with inbuilt Winch & Motor with Remote facility for operations of Manrider. Manrider must have anti fall arresting system with independent safety wire rope of min 8mm.The Soil Bearing Capacity is 10 T/m² at 2.5Mtr Below G.L and Density of Soil 1.44 T/m³, It should be the responsibility of the contractor to get the soil tested from authentic laboratory. All the Specifications and Safety Parameters complete in all respect as approved including supply and installation of Aviation Dome Light on the top of High Mast Pole as approved and desired by the Engineer-In-Charge at site.

(A) Specifications

Height of mast:- 25 Mtr Max (20 mt High mast + 5 mt Foxed Head Frame)

No of section:- Four Section including fix head frame

Length of Bottom Section:- 15 Mtr Minimum

Material Construciton:- ASTM A572 Grade 50/ BSEN 10025 5335

Base dia and top diameter:- Base 740mm , Top 350mm (min)

Thicnness of base plate :- >- 30mm

Cross section of mast:- 20 side polygon

Standard of galvansation:- IS2629/ BS-EN ISO 1461

Thickness of base plate:- 30mm minimum

Lightining protection final:- G.I single spike of length 1200 mm Minimum

Base wind speed as per IS 875:- As per IS:875/ 180Km/Hr

Number of foundation bolts:- 8 Nos.

PCD of foundation bolts:- 740 mm Miniumum

Type/ Diameter/ Length of foundation bolts:- TS 600/30mm dia/minumum 1200 mm long

Steel grade:- BSEN-10025with tenslle strength 355N/Sqm/ASTM A572

Thickness of Galvanization:- 85 Microns Minimum

Diameter of Baseplate:-Minimum 840mm

Size of Door Opening at Base of Mast:- 1200mmX300mm

(B) LANTERN CARRIAGE

Material of Construciton:- 40/50 NB ERW Class B- M.S.Pipe/ ICMC Channel

Hight/ LANTERN CARRIAGE:- 3000mm Min

No of Luminaries:- 20 Nos.

Type:- Asymmetrical

(C) CONTROL CABLE

Cable for supply:- Copper Conductor, 6.0 sq mm 5 core maximum

Insulation/sheathed:- EPR Insulated & PCP sheathed/ PVC

No of cables/ circuits per mast:- 1 No (3phase) flexible tpe multicore

(D) WINCH/POWER TOOL

Type/SWL of which:- Double drum (DD2GPB) tested from IIT/ any accredited Lab of Govt. of India approved with specific Load bearing capacity 750kg

Method of operation:- Integral Motor

Motor Capacity:- 2HP Power tool 3 phase electric moter reversible type 415/250 volt intergral (inside high mast)

No of speeds:- Single speed 6 pole

(E) STAINLESS STEEL WIRE ROPE

Grade/ construction:- ASIS 316,7/19,SS 316,7/19 construction tested from IIT and of reputed make e.g Usha Martin or Equivalent.

Number of Ropes:- 3 Nos

Diametre of Rope (mm):- 8 mm dia

Breaking load capacity of rope:- Minumum 3250 Kg per SS wire rope

Supply and erection of Manrider Unit Made up of Steel Frame with Special Designed winch with Safety Rope Feature and Power Tool with Auto/ Manual Operation with Safe Load Capacity of 300KG with lifting Speed 9m/minute.The Manrider unit must have Security lock & overload protection switch. The Lift must decend if there is no power and magnetic brake would be applied immediately. There is no motor or winch shall be placed inside of the Mast. The Manrider system shall be independent unit with inbuilt Winch & Motor with Remote facility for operations of Manrider. Manrider must have anti fall arresting system with independent safety wire rope of min 8mm complete in all respect as approved and desired by the Engineer-In-Charge at site.

Casting of suitable open raft type shallow foundation with M-25 cement concrete and steel reinforcement for 25 Mtr. High mast.The Cost of Soil testing in contractor Scope.The rate includes excavation, filling with M-25 cement concrete including disposal of waste material complete with finishing to the satisfaction of Engineer-in charge.Making Reniforced Cement Concrete Foundation for 25 Mtr. High Mast Pole including Earth work in excavation 4400mmX4400mmX2600mm= 52.67 cum, Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) complete 4X4400mmX450mm = 8.09 sqm, Providing/Laying of cement concrete 1:4:8 with brick/stone complete 4400mmX4400mmX100mm =2.0 cum, Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. Complete 4X2350mmX1500mm =14.40 sqm, Providing/ Laying reniforced cement concrete M25 in base 4400mmX4400mmX450mm =9.12 cum, Providing/ Laying reniforced cement concrete M25 in vertical beam 1500mmX1500mmX2350mm =5.53 cum, Providing/Laying of cold twisted deformed bar FE-500 = 7.08 Qtl.(Approx) Complete in all respect as per drawing supplied by the pole manufacturer.

Supply and erection of LED Flood Light 500watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.

SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES:

CUBICAL PEDESTAL:

Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:-

Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm

PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (50/0.25mm), 3Core

XLPE INSULATED UN-ARMOURED CABLES (LOOSE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 16sq.mm (4 Core) Un-armoured (Loose)

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-

Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:

MINIATURE CIRCUIT BREAKERS:

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

TP&N Horizontal Double Door Distribution Board 6 way each

8 SWG COPPER EARTHING :

Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:

Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 10 -16sq.mm

Cost of Security & Campus Lighting

PVC INSULATED FR COPPER CONDUCTOR CABLES:

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 3Core

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-

Overall size 10sq.mm (3Core) Un-armoured (On-Surface)

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-

SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 10 - 16sq.mm

Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.

Cost of DG SET 125KVA

COPPER EARTHING (Upto 14 metre in Length):

Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-

Earthing with 25mm x 3mm Copper Tape (upto 14Metre in Length)

COPPER EARTHING STRIP (As Additional Length):

Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-

Additional Length 25mm x 3mm thick Copper Tape

Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 125KVA/100KW without AMF Panel, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV Norms upto date amendments) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.

ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication. ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled

Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use. ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.

Making of Cement concrete foundation of size 15' X 8' X 2' high for DG Set. The foundation start with Earth work in excavation 20' x 10' in foundations, Cement Concrete 1:5:10 with 40mm gauge stone agreegate mixing by mechanical means using concrete mixer volumetric type of size 20'x10'x0.75' , First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth size 17'x1.125'x 2' & 8'x1.125'x 2' , Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres sizes 16.75'x7.75'x2', Shuttering for faces of concrete foundations and foundations, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. sizes 18'x8'x0.5', Cold twisted deformed (Ribbed/for Steel Bar) Bar Fe 500 grade as per IS 1786-2008 and ost of shed included as Plinth size to cover DG with the material of Fiber/iron sheets, angle, Channels, or iron pipes complete in all respect as per site requirement and as desired by the Engineer in charge.

Cost Of 11KV 500 KVA Electrical CSS Type Sub Station including Interconnection Cables

XLPE INSULATED UN-ARMOURED CABLES (LOOSE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 25sq.mm (4 Core) Un-armoured (Loose)

Overall size 35sq.mm (3½ Core) Un-armoured (Loose)

Overall size 70sq.mm (3½ Core) Un-armoured (Loose)

Overall size 95sq.mm (3½ Core) Un-armoured (Loose)

Overall size 120sq.mm (3½ Core) Un-armoured (Loose)

Overall size 150sq.mm (3½ Core) Un-armoured (Loose)

Overall size 240sq.mm (3½ Core) Un-armoured (Loose)

COPPER EARTHING (Upto 14 metre in Length):

Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:

Earthing with 25mm x 3mm Copper Tape (upto 14Metre in Length)

Earthing with 25mm x 5mm Copper Tape (upto 14Metre in Length)

COPPER EARTHING (Upto 23 metre in Length):

Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 19.50 metre (63.96 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 23metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 18metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-

Earthing with 40mm x 5mm Copper Tape (upto 23Metre in Length)

COPPER EARTHING STRIP (As Additional Length):

Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-

Additional Length 25mm x 3mm thick Copper Tape

Additional Length 25mm x 5mm thick Copper Tape

Additional Length 40mm x 5mm thick Copper Tape

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-

Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)

Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)

Double Walled Corrugated HDPE Pipe 90/ 76mm (Outer/ Inner dia.)

Double Walled Corrugated HDPE Pipe 120/ 103.5mm (Outer/ Inner dia.)

XLPE INSULATED HT CABLES:

XLPE INSULATED HT ARMOURED CABLES (LOOSE):

Supply & laying of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011 working voltage 11KV(E) grade to be laid loose in the existing trench or pipe:-

HT Cable Overall size 35sq.mm (3Core) ( Fom Meter Room VCB Outgoings to Transformer-1&2

HT Cable Overall size 70sq.mm (3Core)

S/E of Heat shrinkable cable end termination/ Straight through joint kit for 11 KVA /6.6 KV (E) XLPE Cables as approved & desired by Enginer in charge:-

Heat Shrinkable End Termination for cable size 50-95 sq. mm, 3Core (Indoor Type)

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 25 -35sq.mm

Aluminium thimble cable Core size 70sq.mm

Aluminium thimble cable Core size 95sq.mm

Aluminium thimble cable Core size 120sq.mm

Aluminium thimble cable Core size 150sq.mm

Aluminium thimble cable Core size 240sq.mm

MCCB's (MOULDED CASE CIRCUIT BREAKER):

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-

MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MCCB Four Pole 250amp., 415volts, ≥36kA Fixed Magnetic and Adjustable Thermal Setting

MCCB Four Pole 400amp., 415volts, ≥36kA Mcroprocssor based Adjustable Thermal setting

AIR CIRCUIT BREAKERS

Air Circuit Breaker Four Pole, 800amp., 415volts (Electrical Draw-Out Type)

Supply, Erection, Testing and Commisioning of HT 11kV Package Substations 500KVA is completely self-contained Solution for power distribution that includes Pre fabricated outdoor duty enclosure, high voltage switchgear, distribution transformer, low voltage panel and accessories such as power factor improvement equipment, control and protection equipments, all providing a cost effective. The complete unit shall be installed on a substation plint (base) as outdoor substation. Package substation shall have the following equipments: 11kV Switchgear: 11 kV, 3 Phase, SF6 compact switchgear panel with 11kV Load break switches controls incoming-outgoing feeder cables of 11kV ring main distribution system and Vacuum circuit breaker (VCB) as protection to the transformer. The Load break switch, Vacuum circuit breaker, Bus bars should be mounted inside a sealed robotically welded stainless steel tank enclosure. The operating mechanism of switches and breakers shall be outside the SF6 tank and accesible from front. The tank should be filled with SF6 gas at an adequate pressure. The degree of protection for gas tank should be IP67.

There shall be provision for filling the SF6 gas at site. Stainless steel gas tank shall confirm to the sealed pressure system and ensure the gas leakage to 0.1% per year as per IEC 60298. The Panels shall be tested for IAC level of min. 21kA/1 Sec. No. of operations of Vacuum interrupter bottles for better performance (i) At rated current: 10,000 operation (ii) No. of short circuit dead operation at rated short circuit current: 40 opeartion. Load break switch parameters are as below: (a). 11kV, 3Phase HT manually operated Load break switches 630Amp., copper busbars with integral earth switch having ON/OFF/EARTHED indiaction, live cable indiaction cable termination bushing suitable for 300sq mm XLPE cable. (b). Type: Load breaking and fault making in SF6 tank (c). Fault making capacity : 52.5kAp (d). Operating Mechanism: Operating handle with ON, OFF, Earth positions with arrangement for padlocking in each position

Transformer: 11KV/433V Distribution Transformer, Three Phase 50 Hz, Oil Immersed, Naturally Cooled ONAN, Core type double wound with copper conductor cnforming to IS:1180 (2014) Level-2 ( As Latest Amedments -4) & IS: 2026, vector group Dyn11 suitable for packaged substation housed in a enclosure with corrugated tank arrangement hermeatically sealed. Transformer parameters are as follows: (a). Off Circuit Tap changer: +5% to -10% off circuit tapping in steps of 2.5%. (b). Permissible Temp. Rise of Oil: 40°C (c). Permissible Temp. Rise of Winding 45°C (d). Magnetic Core: Prime grade of M4 or better (e). System Highest Voltage :- 12kV at the HV side (f). Terminations: Cable Box on HV & LV Side (g). Insulation Level: ● H.V. Power Frequency (KV rms) : 28 kV ● H.V. Impulse withstand voltage (KV peak): 75 kVp

Enclosure for PSS: Outdoor type enclousre shall be made of 2mm thickness of galvanised sheet steel tropicalised to meet indian weather conditions including all the partition sheets and doors. The enclosure shall be corrugated type wall design for better heat dissipation, provinding robust construction and enclousre should have IP54 degree of protection for HT & LT switchgear compartment & IP 23 protection for transformer compartment. the base of the enclosure shall be of 4mm thickness hot dip galavanized sheet steel to ensure rigidity for easy transport & installation. The entire package substation shall be factory assemble & factory fitted. Each compartment should be provided with the door and pad locking arrangement. The unit shall be tested for internal arc fault test to the tune atlest 20kA for 1 second as per latest IEC 62271-202. Interconnection & Earthing: Interconnection between HT switchgear & transformer using screened covered aluminium XLPE single core cable & interconnection between transformer & LT switchgear using aluminium busbars with copper flexibles. Internal earthing connections by 50x 6mm G.I strips.

LT switchgear: (a). LT switchgear with 433V suitable ampere rating Aluminium busbars with 100% neutral (b). 1 No. 800A ACB FP 50KA microprocessor based for O/C, S/C & Integrated E/F release type for incomerg of the transformer Metering compartment: (c). 1 No.Digital multi functional meter class1.0 APFC Capacitor Panel: The metallized polypropylene capacitor bank capacity 200 KVAR @ 440V along with Capacitors 525V. The stage ratings shall be 2 X 50 KVAR + 2 x 25KVAR + 1 x 20KVAR +1 x 15KVAR + 1 x 10KVAR+ 1 x 5KVAR, The incomer of Each Capacitor Bank should having MCCB 36/25ka as per standards , Ics = 100% Icu & Power Contactors of same rating. The Concerened contactor shall be provide the detailed drawing of CSS from OEM designed attested and submitted to department for approval with complete specification and approved from the Engineer in charge at site.

Package Substation 11kV HT Switchgear with 3 way RMU (RRL), consisting of 2 Nos. manually operated Load Break Switch 630 Amp., 1 No. manually operated VCB 630 Amp., 11KV/433V, 500kVA ONAN type transformer, 1 No. ACB 800Amp., FP, 50KA microprocessor based & 200kvar capacitor Panel. complete in all respect as approved and desired by the Engineer in-charges at site

Designing, Supplying, installation, testing &commissioning of Indoor cubical type Main LT TTA panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel as per IEC 61439-1&2 with IP 42 (indoor type). The Panel shall be tested for all type test as per IEC 61439-1&2 & IEC61641 with aluminum busbar, The company shall submit the all type test reports during drawing approval. (Dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system,IP54/55 and minimum 50kA. The Panel shall be fully type tested at an Independent Laboratory and shall comply to IEC 61439-1&2 and IEC 61921. The Panel shall be (Indoor) type, weather, dust and vermin proof suitable for humidity up to 95%. Average daily temperature: +35°C max, Ambient temperature: -5°C to 40°C, Maximum altitude: 2000 m. The Supervision,Inspection & testing at Manufactuers site(By department) Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet,,conforming to IS:8623. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The door should be double door design without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement.

The Panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel.The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7 tank Powder coated process should present in company pemises) after necessary putty work . Busbar :- The panel shall be provided with TPN aluminium busbar of suitable size according to the size of ACB/MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium. All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports.ACB terminals should be rotatable type.

Main LT Panel ( SubStation -1 ) for CSS Transformer (500KVA) Main Incomer:- 1. ACB 800 Amps., EDO FP Icw=50kA for 1 sec Microprcoessor based release with LSIG protection = 1No. and Multi Function Meter with display parameter of Voltage, Ampere, KW, KWH, KVA, Frequency, PF, % THD, phase angle and LED Cluster Indicating lamps and 2 Amp control MCB suitable size CTs = 1No. Outgoings:- 1. MCCB 400Amp. Microprocesser based , Four Pole, 36KA Microprcoessor based = 1No., 2. MCCB 200Amp. Adjustable Thermal and Fixed Magnetic Protection, FP, 25KA = 3 No., 3. MCCB 250Amp. Adjustable Thermal and Fixed Magnetic Protection, FP, 36KA= 1 no. 4. MCCB 100/63/40Amp. Adjustable Thermal and Fixed Magnetic Protection, FP, 25KA= 7no. Empty compartment for Future Provision 100A MCCB=2no.

Supply , fixing , connecting and testing of OEM Factory Manufactured / Company TTA APFC Panel of capacity 150 KVAR @ 440V along with Capacitors 525V. The stage ratings shall be 5x 25KVAR + 1 x 20KVAR+ 1 x 5KVAR, The incomer of Each Capacitor Bank should having MCCB 36/25ka as per standards , Ics = 100% Icu & Power Contactors of same rating. The APFC Panel shall be fully type tested at an Independent Laboratory and shall comply to IEC 61439-1&2 and IEC 61921. The APFC Panel shall be (Indoor) type, weather, dust and vermin proof suitable for humidity up to 95%. Average daily temperature: +35°C max, Ambient temperature: -5°C to 40°C, Maximum altitude: 2000 m. As equipment shall be comprising of the following:-

1. Insulated bus bar pan assembly made from copper and rated of 320/400 Amps capacity. The short circuit withstand capacity shall be 50 KA / 1 Sec ( Icw) for the main bus bar and the rated impulse withstand voltage shall be 6 KV. 2. The incomer of the APFC Panel shall be a 250Amp MCCB / 36KA/4P/TP Microprocessor based LSIG protection. The MCCB shall be of certified design confirming to IEC 60947-1,2 & 3., Ics = 100% Icu, MCCB shall have standard extended rotary handle, spreaders, phase barrier. 3. Capacitor Units : The capacitor unit shall be metalized polypropylene film with Zn / Al alloy. The capacitors shall be encapsulated in an aluminium can. The capacitor unit shall have a rated voltage of 525V and shall have a maximum over current capacity of : 1.8 In. The capacitor unit shall have a built in 3 phase over pressure protection and shall have discharge resistors ( 50V in 1min ) factory fitted and shall be tamper proof. Capacitance Tolerance -5%, +10%. Maximum permissible over voltage 1.1 x Un, 8 h every 24 h. The capacitor unit shall be of certified design confirming to IS-13340-1993,13341-1992 & IEC -60831-1&2.

4. Short-circuit and Overload Protection : Each stage of the APFC Panel shall have a suitably rated MCCB for short-circuit and overload protection. The over-current setting shall be adjustable & Breaking capacity Ics=> 50kAThe MCCB shall be of certified design confirming to IEC 60947-1,2 & 3. 5. PF Regulator : Advanced Range PF Regulator shall have 6 steps with a LCD Display, Voltage Range : 90V - 550V, 50 / 60Hz, CT Input : 1A/5A with a built in RS 485 communication port. The PF Regulator shall be of certified design confirming to IEC 61326. 6. Stage Contactor & Reactor : The electromagnetic contactors shall be rated for 660 Volts and shall be 3-pole type and shall be employed for switching 'on' and switching 'off' operations in capacitor banks. The rated voltage of control coil shall be 415V (phase-to-phase). This voltage is subject to a variation of (+) 10% and (-) 15%. The contactor shall be AC3b type. The contactor shall be of certified design confirming to IEC 60947-1 & 4-1. The de-tuning reactors shall be connected in series with each capacitor stage and shall be of iron cored type.The Detuned Reactor Should be equipped with Thermal Switch inside the Winding which should cut-off the respective contactor in case of Over-temperature. Tolerance of reactors shall not exceed +/-3% of rated value.

7. Ventilating fans of required size shall be sued to dissipate the heat produced by the capacitor bank components like the capacitor units, reactors, contactors, breakers etc. The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory should be submitted along with the offer. Note:- Manufacturer/Company of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer / Company workshop as per ISO9001:2015 standerd). The warranty period will be start after complete commissioning. The Supervision,Inspection & testing at Manufactuers site (By department in contractor scope). The Concerened contactor shall be provide the detailed drawing of panel from OEM designed attested and submitted to department for approval with complete specification in all respects as approved and desired by the Engineer-in-charge at site

Supply and erection of Dry Chemical powder (DCP) type Fire extinguisher 6Kg ISI mark: 15683 complete with squeeze type lever, hose, filled with ISI mark powder IS 4308 Complete in all respect as desired by engineer in charge of the work.

Supply and erection of writing shock chart (Calendar Type) Complete in all respect as desired by engineer in charge of the work.

Supply and erection of providing and fixing of fire bucket with MS hook stand complete in all respect as desired by engineer in charge of the work.

Supply and erection of Non skkid rubber mat ISI 1000mm x 2000mm x 12mm for 11 KVA supply complete in all respect as desired by engineer in charge of the work.

Supply and erection of Medical Kit complete in all respect as desired by engineer in charge of the work.

Supply and erection of Danger Plate 11000 volts and 440 volts size 200mm x 150mm complete in all respect as desired by engineer in charge of the work.

Supply of 11 KV HT Glovees complete in all respect as desired by engineer in charge of the work.

Please Enable Macros to View BoQ information