REWIRING OF OTM AND MD ACCN REPAIR AND MAINT OF BLDG EARTHING AT BIKRAM ENCLAVE NCSR AREA 9 R AND O, 14 FD SUB GP HQ 1 SIG GP CMDC, ASCON NODE AND SAPPER ENCLAVE UNDER AGE EM GE SOUTH UDHAMPUR

Amount

Taking down carefully aluminium/copper point wiring complete with (light, fan, socket or power) fitting such as switch, sockets, ceiling rose, pendents sockets, rectangular board, terminal boxes etc making good to disturbed surface of walls, keeping aside serviceable item for re-use within the same bldg and removing unserviceable item from site complete all as specified and directed.

Point wiring for one light point/fan point /Bell point/Exhaust Fan, controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible cable in and including not less than 2 mm thick 20 mm dia non metallic rigid PVC conduit (ISI marked) surface/concealed wiring with 1.25 mm thick pressed steel terminal boxes (modular type) concealed in walls for fixing of modular switches/regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead & connected to common earth and earthdolly including modular cover plate with frame making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per ser item No 2 here in before above but for one light point control by two nos two way modular switches on independent Board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 2 here in before above but for 3 pin 6 Amp Socket outlets point controlled by one modular switch 6A on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 2 here in before above but for 3 pin 6 Amp Socket outlets point controlled by one modular switch 6A on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 2 here in before above but for 3 pin 16A socket outlet point controlled by one modular switch 16A on the independent Board with 4 sqmm size of copper cable as main and 2.5 sqmm copper cable as earth lead complete all as specified and directed.

Switch modular type, 1 module, 6 Amps one way complete all as specified and directed.

Switch modular type, 1 module, 16 Amps one way complete all as specified and directed.

Socket outlet modular type, 2 module, 3 pin, 6 Amps combined complete all as specified and directed.

Socket outlet, modular type, 2 module, 2-in-1, 6/16 Amps combined complete all as specified and directed.

Switch modular type, 1 module, 6 Amps two way complete all as specified and directed.

Bell push with indicator modular type, 1 module, 6A complete all as specified and directed.

Fan regulator modular type, 2 module, step type,100 watts complete all as specified and directed.

Point wiring for one light/fan/Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) and 1.25 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 2 mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per ser item No 14 herein before above but for one light point control by two nos two way switches on independent Board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 14 herein before above but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano type on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 14 herein before above but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano Type on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 14 herein before above but for 3 pin 15A socket outlet point controlled by one switch 15A on the independent Board with 4 sqmm size of copper cable as main and 2.5 sqmm copper cable as earth lead complete all as specified and directed.

Switch piano flush type SP, one way 5 Amps complete all as specified and directed.

Switch - socket combination 2 in 1 5 Amps, flush type complete all as specified and directed.

Switch - socket combination 5A/15 Amps, 5 in 1 complete all as specified and directed.

Socket outlet 2 in 1, 5 pin, 5 Amps complete all as specified and directed.

Two way switch 6 Amps, 230 volts complete all as specified and directed.

Fan electronic dimmers 450W, 250V flush type on the existing laminated sheet complete all as specified and directed.

Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block complete all as specified and directed by Engr-in-Charge.

Bell push 230 volts, AC complete all as specified and directed.

Call bell ding-dong 230 volts complete all as specified and directed.

LED tube light fitting Garnet 20W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro, Product code - D532065 or Equivalent make in C&S/ Havells

LED tube light fitting Garnet 10W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro, Product code - D 531065 or Equivalent make in C&S/ Havells

LED tube light fitting Garnet 5W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro, Product code D530565 or Equivalent make in C&S/Havells

9 watt LED Bulk Head Light energy saving with IP65 with opal diffuser, pressure die cast aluminium housing including taking down old one complete all as specified and directions of Engr-in-Charge. Make - Syska LED, Cat Part No - SSk-BH-9W or equivalent make in wipro, C&S.

Garnet Slim 40 Watt 2 x 2 LED Flat Panel light with diffused optics (590 x 590 mm) complete making all connection including taking down old one complete all as specified and directions of Engr-in-Charge. Make - WIPRO, Cat Part No D414065 or equivalent make in Syska/C&S

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm drawing through existing surface/recessed steel/ PVC conduit of any type and size including PVC insulated copper conductor cable 6 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm drawing through existing surfacce/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 4 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 12 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian/Legrand/Standard

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 8 way with double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian/Legrand/Standard

Sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make - Indoasian/Legrand/Standard

VTPN MCCB DB-Double Door (including 63 Amp MCCB) 16 kA (as incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. All PCC and cementing work for installation of VTPN DB to wall, deemed to be quoted rate by contractor. Make - Indoasian/Legrand/Standard

MCB Single Pole, 230 Volt, B-Series, Raiting 6 to 32 Amps complete all as specified and directed. Make : Indoasian Cat Part No 811015 or equivalent make in Havells/Legrand, Note : MCBs reuired to fix in existing DBs

MCB Single Pole and Neutral, 230 Volt, B-Series, Rating 40A as incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian Cat Part No 811035 or equivalent make in Havells/Legrand.

MCB Single Pole and Neutral, 230 Volt, B-Series, Rating 63A as incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian Cat Part No 811037 or equivalent make in Havells/Legrand.

MCB Three Pole and Neutral , 230 Volt, Rating 63A as incoming in MCB TPN DB complete all as specified and directed. Make : Indoasian Cat Part No 811220 or equivalent make in Havells/Legrand.

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 thick as earth electrode burried directly in ground earth plate not less than 2.25 m deep below normal groung level with top edge of earth plate not less than 1.5 m below ground level connected to and including galvnised steel earth lead wire 4 mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed inculding providing earth wire protection pipe GI light grade 15 mm dia from earth plate to main switch board/panal, watering pipe 20 mm dia with mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of characoal dust and salt all around the earth plate, earth work in any type of soil, remaning surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or complete all as specified and directed by Engineer-in-Charge.

LED street light fitting 20W Garnet with single piece deep drawn AL housing with side reflectors and acrylic cover including fixing arregement in existing bracket complete all as specified and directed by Engr-in-Charge. Make : Wipro, Cat Part No D 912065 or eqiuvalent in Havells/Syska

Street light Bracket complete made of GI pipe of suitable size 32 mm, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall complete all as specified and directed by Engr-in-Charge.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size16 sqmm 4 core including taking down old unserviceable cable complete all as specified and directed. . Note : Earth work and other connected work shall be measured & paid seperately.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of pipe/cable/foundation of poles and stays in any type of soft/loose soil and getting out etc complete all as specified and directed by Engr-in-Charge.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured

Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Galvanized steel pipe light grade with all fitting laid in trenches or passing through cable/road crossing or fixing along pole with suitable size clamps complete of size 32 mm dia complete all as specified and directed.

Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and directed.

pargal builders

HIMALAYA ENTERPRISES

m/s shanti trading company

VARDHMAN INTERNATIONAL

DEV RAJ MAGOTRA

PREM NATH KHAJURIA AND SONS

PARDEEP SHARMA