Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.8 LAccepted-AOC NANAK TOWER 3RD FLOOR SEVOKE ROAD SILIGURI | L1 | Accepted-AOC L1-Accepted | |
| 2 | L3₹63.2 L+₹42,233.82 (0.67%)Rejected-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | L3 | Rejected-Finance Higher than L1. |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
15 Feb 2023, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, MALDA MECHANICAL DIVISION, PHE
Office of the Executive Engineer, Malda Mechanical Division, PHE Dte. Doulatpur PHE complex, P.O. Maliha, Dist. Malda, PIN 732102
Supply, installation, commissioning and trial operation of Electro-Mechanical and instrumentation components at newly constructed CWR under Sattari Distribution Zone within Malda Arsenic Area Water Supply Scheme (Northern Sector) under MLMD PHED
2023_PHED_456359_6
WBPHED/EE/MLMD/NIeT_29 of 2022-2023
Open Tender
Electrical Work/ Equipment
Item Rate
180 days
Doulatpur PHE Complex, P.O. Maliha, Dist. Malda
Please refer Tender documents.
6 documents required · 6 mandatory
₹1.3 L
Yes
25 Aug 2025
30 Jan 2023
17 Feb 2023
30 Jan 2023
15 Feb 2023
30 Jan 2023
Amount
Supply, delivery and storage at site of Vertical Turbine Pump with discharge head assembly, sole plate, companion flange, thrust bearing housing with coupling, NRR assembly and motor stool, self water lubricated column and shaft assembly, bowl assembly and basket strainer having the following specification. Discharge :- 150 m3 per hour Generated Head :- 35 MWC H-Q-P Curve of pumps, Datasheet, General Arrangement of drawing and Pump Manufacturing Quality Plan has to be submitted during the delivery. (Pumps should be suitable for PLC operated unmaned operation facility and pumping clear water form CWR at Sattari Distribution Zone to one (01) nos OHR For further specification go through NIeT.
Supply, delivery and storage at site of 4 pole, 1500 RPM, AC, 3 Phase, 50 Hz, 415 V, 30 KW IE-3 Vertical Flange Mounted squirrel cage induction motor suitable for the pump duty mentioned above ( item No- 1.00) with adequate margin. For further specification go through NIeT. Routine test certificate of Induction Motor has to be submitted during delivery
Supply, delivery and storage at site of CI doble flanged single door swing check 200 mm dia N.R.V with by-pass arrangement as per IS : 5312, Part-I, PN-1.0 N.B. : Test Certificate to be produced for each valve. (AT DELIVERY SIDE OF PUMP)
Supply, delivery and storage at site 200 mm dia double flanged Cast Iron actuator operated butterfly valve generally conforming to BS 5155 and disc conforming to IS:210 ,PN-1.0. N.B. : Test Certificate to be produced for each valve. (AT DELIVERY SIDE OF PUMP )
Supply, delivery and storage at site 200 mm dia double flanged Cast Iron gear operated butterfly valve generally conforming to BS 5155 and disc conforming to IS:210 PN-1.6 N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )
Supply, delivery and storage at site 80 mm dia Cast Iron kinetic double orifice air released valve as per relevant IS, PN-1.6. N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )
Supply, delivery and storage at site suitable M.S. Dismantling Joint
DN 200 mm PN 1.0 ( for Delivery side & common header of pump )
Supply, delivery and storage at site Bourdon type pressure & compound gauges, 150 mm dia cast Aluminium Dial with , SS internal, DN 15 GI impulse line with three way cock.
Pressure Guages (0 - 10 kg/cm2)
Supply, delivery and storage at site of 200 mm dia 9.5 mm thick MS Black Pipe conforming to IS:3589 Gr.330 (For Delivery & Delivery Header) ( along with necessary Bends, Bellmouths, fittings viz. flanges, bolts, nuts, gaskets , eccentric reducers, concentric enlarger etc. as reqd. to make the installation complete in all respect. (For individual discharge line of pump under Sl no 1.00)
Design, manufacture and delivery & storage at site of straight monorail of 8.5 mtrs. suitable for a load of 2 MT capacity and to be supported on roof beams having 6 mtr. lift on insert plates on roof beams as per technical specification in NIT. Suitable Base Plate and Side Insert Plates shall have to be provided on Concrete Brackets for supporting the monorail. The monorail shall be designed for Class-I Duty Indoor Operation Conforming to IS:807, IS:3177 and IS:3832 and as per Technical Specification. Test and Guarantee Certificate have to be supplied at the time of delivery
Supply, delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt MCC Panel having required Feeders. For further specification go through NIeT.
Supply, delivery, installation and commissioing of 63 KVA Power Correction arrangement. For further specification go through NIeT.
Supply, Delivery and storage at site 3.5 core 1.1 KV Grade 2 X 50 mm2 XLPE insulated Al.Ar Cable.(For MCCB to Main Incomer of MCC Panel)
Supply, Delivery and storage at site 3 core 1.1 KV Grade 2 X 10 mm2 XLPE insulated Cu. Ar. Cable.(For MCC Panel to individual 2 nos. Induction motor )
Supply, Delivery and storage at site 3 core 1.1 KV Grade 6.0 Sq. mm. XLPE insulated Al.Ar Cable.(For MCC Panel to individual valve actuator)
Supply, Delivery and storage at site 12 core 1.1 KV Grade 1.5 Sq. mm. XLPE insulated Copper control Cable.
Supply, Delivery and storage at site Electromagnetic Type Flowmeter (DN 200 mm). For further specification go through NIeT.
Supply, delivery and storage at site of Ultrasonic type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump. For further specification go through NIeT.
Supply and fixing of indoor illumination arrangement like suitable size wire, switch ,switch board ,tube light fitting ,exhaust fan ,ceilling fan , LED outdoor fixture complete.
Providing earthing & lightning protection for Pump house, and electrical installation as per ISS and IE rules (Earth pit 4 nos + 2 L/A)
Supply and fixing of GI perforated cable tray at Pump house for laying of incoming & outgoing power and control cables to and from MCC Panel having proper M.S. structural support as per direction of EIC.
Supply and fixing of safety equipment like suitable capacity Fire Extinguisher , sand bucket ,fire bracket, rubber mats, shock treatment chart and first aid box, 415 volt danger board complete as per direction of EIC.
Painting of the installation (viz. Monorail, pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over one coat of primer as per direction of EIC.
Installation of all items as mentioned in (Sl.No. 1.00 to 18.00 except item no. 12.00) including laying of cables with necessary jointing materials and copper socket gland complete, earthing arrangement of motors, starters, flowmeter, water level controller including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per IE rules and upto entire satisfaction of EIC.
Testing & Commissioning of the entire installation i.e. Pumps, Motors, Valves, Electrical acessories and instrumentation etc. as in (Sl.No. 1.00 to 18.00 except item no. 12.00) as per direction and to the entire satisfaction of E.I.C.
Operation and maintenance of the entire installation in both PMCC cum PDB Panel and high lift puming machinaries on 24 hrs. basis including guarding for a period of 365 days are to be provided with supply of skilled personnel from the date of commissioning. During maintenance period supply of all consumable materials sundrys and lubricants are to be supplied by the agency. Charges of Electrical energy during maintenance period will be born by the Department.
MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019
Add GST @ 18%
Add Cess @ 1%
DEY ENTERPRISE
DEY ENTERPRISE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .