E.I repair and renovation works at CSSD Room at Ground floor, Bidhan Block of Midnapore Medical College and Hospital, Paschim Medinipur.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 8 Mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. On Board.

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Up to 160A 8 way Enclosure (Make- Siemens/ Schneider/ L&T)

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment.8 way VTPN. (Make- Siemens/ Schneider/ L&T)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection a)160A (Make- Siemens/ Schneider/ L&T)

Supplying and fixing 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. A) 63 A (Make- Siemens/ Schneider/ L&T)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (4 Way) (Make- Siemens/ Schneider/ L&T)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. A) 63 A FP (Make- Siemens/ Schneider/ L&T)

Supply and Delivery of 230V,20 watt Polycarbonate body LED tube light (Make- Wipro, Cat No.- LL13-181-65SE/ Philips/Crompton)

Supply and Delivery of 230V, Double LED tube light fittings incl. all acc. Make- Wipro, Cat No.- WIO922208/ Crpmpton/ Philips.

Fixing of single/double LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. with S & F 2x24/0.20 mm flexible copper wire of 1.10 mt. length. incl. 2nos mounting kit.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply and Delivery of 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod,Canopy,fork etc. and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc..(Make -Crompton high speed/ Orient Electric summer breeze.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite /perspex top cover incl. making necy. connections etc.

S & D of following size 1.1Kv grade XLPE insulated Al/A cable. (Make- Polycab/ Havells/ Gloster/RR Kabel)

a) 4 core 95 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. [ From Panel to VTPN DB]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC & finishing the end of the following XLPE/PVC armoured cables by crimping method incl S & F solderless socket (Dowels Make) with tapes, anticorrosive paste & jointing materials .

Laying of cable above 4 core 90 sqmm and upto 4 core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.

From 70sqmm to 150sqmm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make- Polycab/ Havells/ RR Kabel/KEI/ Fenolex) of the following sizes in the 2 x 25 mm dia pipe and by the prelaid GI fish wire and making necy. connection as required.

a) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC. [ From VTPNDB to 3ph load]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a) 10Sqmm

b) 16Sqmm

Add GST @18% on above items from Sl. 1 to Sl. 20.02

Add CESS @1% on above items from Sl.1 to Sl. 21

Note: 1) The rates should be quoted in % above, % below or AaPar whichis inclusive of cost of maintenance, servicing, supply & replacement of spares for 1 (one) years from the date of commissioning. 2) The Agency must procure the materials from the manufacture/OEM or their authorised sales Channel so that the standard warranty/support of the manufacturerer/OEM becomes applicable to the product to be delivered and installed by them. Documents that authenticate such procurement from the manufacturer/OEM or from their authorised sales Channel and standard warranty/support should be sent from the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refubrished materials are supplied and installed, penal action will be taken as per existing rule. Before execution of the work the prospective bider has to submit layout drawing as per design of OEM dully approved by the OEM.

Please Enable Macros to View BoQ information