Trans, Inst, Comm, fabrication, Trail-run and Civil Works of one 1200 mm width, 2x150KW, 6.6KV, Dual Drive PVC Belt Conveyor for a length of 54 mtr. from 20R/-37L and extension of 540 meter along -37L of Panel 25 of CM1 section, RVI seam at MIC, JPC.

Amount

Installation of -37L complete belt conveyor for a length of 54 Metre from 20R/-37L

Transportation and installation of 2x150KW, 6.6 KV, Dual Drive unit Complete with Drive Drum, Driven Drum, Two Gear Boxes, Two Motors, Couplings, Bearing Blocks, Fencings etc. at 20R/-37L after loading it on MUV.

Transportation and Installation of Discharge Unit Complete with Cleaner after loading it on MUV at 20R/-37L.

Transportation and Installation of Loop Take-up Unit Complete, with Fencing after loading it on MUV at 44 metres inside from 20R/-37L.

Transportation and Installation of Tail-end Unit Complete with dust collector, after loading it on MUV at 54 mtr. inside 20R/- 37L

Transportation and Installation of 54 mtr. of belt structure, after loading it on MUV (weight of 1200mm structures is 0.085 Te/mtr.)

Transporting, laying, lapping & jointing of 120 mtr. of belting

Transportation of gear box, brake drum and other related equipment from loop take up unit of 9R belt and fitting them in loop take up unit of -37L belt of panel 25 of CM1 in RVI seam of MIC,JPC.

Laying/placement of Starter, VCB, cables and lockout devices after transporting it a) Transportation of one 6.6KV, 2X150 KW DOL HT Starter from 7R/ -30L to 19R/ -38L after loading it on MUV then unloading and placing manually on platform b) Transportation of two nos 6.6KV, 400A VCB from 8R/ -29L to 19R/-38L after loading it on MUV then unloading and placing manually on platform c) Transportation of 80 mtr., 6.6KV grade 70 Sq.mm armoured cable from 7R/ -30L to 19R/-38L after loading it on MUV then unloading and placing manually on platform d) Laying of pull cord and audio cable throughout the belt line of 54 metre. Fittings of lock out and communication devices along the belt e) Fitting of Dust Collector at Tail End and Fencings of all moving drums

Extension of -37L belt conveyor for a length of at approximately 540 metre from tail end which will be installed initially at 54 metre from 20R/-37L

Transportation and Installation of 540 mtr. of belt structure, after loading it on MUV

Transporting, laying, lapping & jointing of 1080 mtr. of belting

Dismantling of Tail-end Unit Complete with dust collector(20 times of extensions)

Transportation and Installation of Tail-end Unit Complete with dust collector(20 times of extensions)

Transportation and laying of pull cord and audio cable throughout the belt line of 540 metre. Fittings of lock out and communication devices along the belt.

Civil foundation work of drive head, discharge, loop take up and platforms for 6.6 KV starter and VCBs for installation for 1200mm belt conveyor at 27m inside from -37L/20R in R-VI seam of MIC, Jhanjra Project Colliery.

Recess cutting in hard stone

Providing and laying in position cement concrete of specified grade excluding the cost or centering and shuttering. All work up to plinth level - 1:1½:3 (1 Cemènt: 1½ Coarse sand (Zone-III derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing & laying RCC work 1:3:6 for foundation & plinth MANUAL MIXING

Brick work with fly ash bricks 1:6 in foundation

12 mm th. Cement plaster (1:6)

Loading material (stone aggregate and sand) into MUV and unloading at UG

Loading material (cement) into MUV and unloading at UG

Loading material (bricks) into MUV and unloading at UG

Supply of Materials

Supply of MS Nut & Bolt (M16x40)

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE

F.R. ENTERPRISE