Providing gas system at new OPD block temporarily converted to Covid hospital at IGMC Shimla

Amount

Supplying, installation, testing and commissioning of Oxygen Manifold with 20 Nos. Pigtail pipes for 20+20 cylinders and Non-return valves complete etc as required at site and as per technical specifications, as per HTM-2022/02-01 of UK/NFPA99C of USA - (without cylinder) complete in all respect etc as required . installation, testing and commissioning of Fully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK/NFPA99C of USA as per technical specifications -

Supplying, installation, testing and commissioning of Medical Grade BS EN: 13348 Kite Marked Llyod's Register Group Ltd./Copper Pipe.

a) 42mm OD x 0.90 mm thick minimum

b) 28 mm OD x 0.90 mm thick minimum

c) 22 mm OD x 0.90mm thick minimum

d) 15mm OD x 0.9mm thick minimum

c) 12mm OD x 0.70mm thick minimum

Supplying, installation, testing and commissioning of Medical line valve, as per CE Certified/UL Listed as per technical specifications (Indian)

a) 42mm OD

Supplying, installation, testing and commissioning of Medical line valve, as per CE Certified/UL Listed as per technical specifications (Indian)

a) 28mm OD

Supplying, installation, testing and commissioning of Medical line valve, as per CE Certified/UL Listed as per technical specifications (Indian)

a) 22mm OD

Supplying, installation, testing and commissioning of Medical line valve, as per CE Certified/UL Listed as per technical specifications (Indian)

a) 15mm OD

Area Gas Alarms It should comply with NFPA99 standard with American UL/ETL/ATL listed certificate.

Oxygen Outlets: Oxygen, HTM or NFPA compliant should be quoted along with 2 probes for each out let. Both imported and indigenous outlets and probes should be quoted separately. The outlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. Imported units should have UL Listing and Indian units must be IS/CE certified.

Humidifer bottle with Probe and Flow meter

Back Pressure Compensated flow meter for accurate gas flow measurement with following features:

A) Control within a range of 0-15 LPM.

B) It should meet strict precision and durability standard.

C) The flow meter body should be made of brass chrome plated materials.

D) The flow tube and shroud components should be made of clear, impact resistant polycarbonate.

E) Flow tube should have large and expanded 0-15 LPM range for improved readability at low flows.

F) Inlet filter of stainless steel wire mesh to prevent entry of foreign particles

G) The humidifier bottle is made of unbreakable & reusable polycarbonate /polysulfone/polypropylene material autoclavable at 121 degree centigrade.

H) Should be supplied with maching probes for outlets.

ULTIMED SOLUTION